| 经销商 | 联系方式 |
|---|---|
| 爱思创Extron电子 | 4000.398766、 021-3760 1568 |
Extron WAP 100AC 是一款天花板安装式双频段无线 AP，设计用于网络流量过大和高要求的业务环境。它支持最新的无线技术，包括带频带切换的双频段频率运行、高传输功率、增强的敏感性 MIMO 接收能力以及内部 4 个高增益天线，能帮助提高网络性能及扩展设备的网络连接。WAP 100AC 还支持最新的 PoE+ 标准，可通过单根以太网电缆获取电源及进行通信。WAP 100AC 非常适合为运行 Extron Control App 的设备提供无线 AP。
| 快速参考 |
|---|
| WAP 100AC (宣传册) |
| WAP 100AC Setup Guide (用户手册) |
| WAP 100AC User Guide (用户手册) |
| 可选附件 | ||
|---|---|---|
| PI 140 | High Power Injector for 12", 15", and 17" TouchLink Pro Touchpanels | |
| 兼容的软件 | ||
|---|---|---|
| Extron Control | 用于 TouchLink、eBUS、网络按键面板和 MediaLink 的控制应用程序 | |
Extron WAP 100AC 是一款天花板安装式双频段无线 AP，设计用于网络流量过大和高要求的业务环境。它支持最新的无线技术，包括带频带切换的双频段频率运行、高传输功率、增强的敏感性 MIMO 接收能力以及内部 4 个高增益天线，能帮助提高网络性能及扩展设备的网络连接。WAP 100AC 还支持最新的 PoE+ 标准，可通过单根以太网电缆获取电源及进行通信。WAP 100AC 非常适合为运行 Extron Control App 的设备提供无线 AP。
特性
支持 5 GHz 的 IEEE 802.11a/n/ac 和 2.4 GHz 的 IEEE 802.11b/g/n 标准
4 个内置 5 dBi 全方位天线
通过内部网页轻松进行设置
显示 WPS、WLAN 5G、WLAN 2.4G、以太网端口和电源的 LED 指示灯
增强的网络安全性
频带切换功能
支持 PoE+ 或 12V DC 电源
示意图
面板图
| WAP 100AC | |||
| Communication — Wireless | |||
|---|---|---|---|
| Standards | IEEE 802.11b/g/n on 2.4 GHz IEEE 802.11a/n/ac on 5 GHz, AC wave 1 |
||
| Security | 64/128/152-bit WEP WPA PSK WPA2 PSK WPA Enterprise WPA2 Enterprise |
||
| Antennae | Four internal omni-directional antennae 5 dBi on 2.4 GHz and 5.0 GHz |
||
| Operating frequency | Dual-Radio Concurrent 2.4 GHz and 5.0 GHz | ||
| Frequency radio | |||
| 2.4 GHz | 2400MHz ~ 2835MHz | ||
| 5.0 GHz | 5180 MHz ~ 5240 MHz, 5260 MHz ~ 5320 MHz, 5500 MHz ~ 5700 MHz, 5745 MHz ~ 5825 MHz |
||
| Transmit power | Up to 26 dBi on 2.4 and 5 GHz Max transmit power is limited by regulatory power |
||
| Radio chains: Spatial streams | 2x2:2 | ||
| Supported data rates | |||
| 2.4 GHz | Max 300 Mbps | ||
| 5.0 GHz | Max 867 Mbps | ||
| Management | |||
| Multiple SSID | Supports up to 8 SSIDs per radio | ||
| QoS | Compliant with IEEE 802.11e Standard WMM |
||
| SNMP | v1, v2c, v3 | ||
| MIB | MIB I/II, Private MIB | ||
| VLAN | VLAN tag/VLAN pass-through | ||
| Program control | Web Interface (HTTP) | ||
| Communication — Ethernet Interface | |||
| Ethernet port | 1 female RJ-45 connector | ||
| Ethernet data rate | 10/100/1000Base-T, half/full duplex with autodetect | ||
| Ethernet default settings | IP address = 192.168.1.1 Subnet mask = 255.255.255.0 Gateway = 192.168.1.1 DHCP = Off DNS = 0.0.0.0 |
||
| General | |||
| Physical interface | Reset button Kensington lock LED indicators: Power, LAN, 2.4 GHz, 5.0 GHz, WPS |
||
| Memory capacity | |||
| Memory | 128 MB | ||
| Flash memory | 16 MB | ||
| Power supply | Not provided | ||
| Power input requirements | Power over Ethernet (IEEE 802.3at compliant) or 12 VDC, 2.0 A max |
||
| Power consumption | 15.77 watts | ||
| Temperature/humidity | Storage: -4 to +140 °F (-20 to +60 °C) / 10% to 90%, noncondensing Operating: +32 to +104 °F (0 to +40 °C) / 10% to 90%, noncondensing |
||
| Cooling | Convection, vents on rear and sides | ||
| Thermal dissipation | 53.82 BTU/hr | ||
| Mounting | |||
| Wall mount | Yes with ceiling and wall mount screw kit | ||
| Ceiling mount | Yes with ceiling and wall mount screw kit or T-rail mounting kit | ||
| Enclosure type | Plastic | ||
 |
|||
| Enclosure dimensions | 1.64" H x 6.36" W x 6.36" D (4.17 cm H* x 16.15 cm W x 16.15 cm D) |
||
| Product weight | 0.62 lb (0.28 kg) | ||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
| Regulatory compliance | |||
| Safety | CE, c-UL, UL | ||
| EMI/EMC | CE, FCC Class B, ICES | ||
| Environmental | Complies with theappropriate requirements of RoHS and WEEE | ||
| Product warranty | 3 years parts and labor | ||
|
|||
|
|||
|
|||
| (8.1-022117-D2) | |||
| 可选附件 | ||
|---|---|---|
| PI 140 | High Power Injector for 12", 15", and 17" TouchLink Pro Touchpanels | |
首页