经销商 | 联系方式 |
---|---|
爱思创Extron电子 | 4000.398766、 021-3760 1568 |
MMX 32 VGA MTP 是微型3x2 VGA和立体声音频矩阵切换器,带内置式Extron MTP 系列双绞线RGBHV和合成的单声道音频信号发送器.
发送器可以通过一根UTP电缆将分辨率达 1600x1200 UXGA 的计算机视频信号发送到 135 米以外。MMX 32 VGA MTP 与高分辨率计算机视频信号、带双级或三级同步的HDTV信号、分量信号、S-视频、复合视频以及立体声音频信号兼容。
特性
·300 MHz (-3 dB) RGB 视频带宽
·内置式双绞线发送器
·可选峰值预调
·支持 RGBHV、合成单声道音频以及双级或三级同步的HDTV 分量视频信号
·通过 RS-232控制 进行音频分离
·RS-232 串行控制端口
·提供外置型国际通用电源,产品编号为 # 70-055-01
示意图
面板图
MMX 32 VGA A Series | |||
Video | |||
---|---|---|---|
Routing | 3 x 2 matrix | ||
Gain | Unity | ||
Bandwidth | 300 MHz (-3 dB), fully loaded 0 – 10 MHz: no more than +0.1 dB to -0.1 dB 0 – 130 MHz: no more than +2 dB to -0.1 dB |
||
Crosstalk | -55 dB @ 10 MHz, -45 dB @ 30 MHz, -37 dB @ 100 MHz | ||
Switching speed | 200 ns (max.) | ||
Video input — MMX 32 VGA A, MMX 32 VGA MTP transmitter | |||
Number/signal type | |||
MMX 32 VGA A | 3 RGBHV, RGBS, RGsB, RsGsBs | ||
MMX 32 VGA MTP transmitter | |||
3 RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video | |||
Connectors | (3) 15-pin HD female | ||
Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and R-Y and B-Y of component video 0.3 Vp-p for C of S-video |
||
Minimum/maximum levels | Analog: -0.5 V to 2.0 Vp-p with no offset at unity gain | ||
Impedance | 75 ohms | ||
Horizontal frequency | 15 kHz to 145 kHz | ||
Vertical frequency | 30 Hz to 170 Hz | ||
Return loss | <-42 dB @ 5 MHz | ||
DC offset (max. allowable) | 4.0 V | ||
Video output — MMX 32 VGA A, MMX 32 VGA MTP receivers | |||
Number/signal type | |||
MMX 32 VGA A | 2 analog RGBHV, RGBS, RGsB | ||
MMX 32 VGA MTP receivers | |||
2 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video | |||
Connectors | |||
MMX 32 VGA A | (1) 15-pin HD female 5 BNC female |
||
MMX 32 VGA MTP receivers | |||
(1) 15-pin HD female 1 RJ-45 female (for proprietary analog signals to be received by MTP R 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ) |
|||
Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and R-Y and B-Y of component video 0.3 Vp-p for C of S-video |
||
Minimum/maximum levels | 0.3 V to 2.0 Vp-p | ||
Impedance | 75 ohms | ||
Return loss | <-30 dB @ 5 MHz | ||
DC offset | |||
MMX 32 VGA A | ±5 mV maximum with input at 0 offset | ||
MMX 32 VGA MTP receivers | |||
<±20 mV with input at 0 offset | |||
Sync | |||
Input type | RGBHV, RGBS, RGsB, RsGsBs | ||
Output type | RGBHV, RGBS, RGsB | ||
Input level | TTL: 2.5 V to 5.0 Vp-p, 4.0 Vp-p normal | ||
Output level | TTL: 4 V to 5 Vp-p, unterminated | ||
Input impedance | 510 ohms | ||
Output impedance | 75 ohms | ||
Max. input voltage | 5 Vp-p | ||
Max. propagation delay | 30 ns | ||
Max. rise/fall time | 4.2 ns | ||
Polarity | |||
MMX 32 VGA A | Positive or negative (follows input) | ||
MMX 32 VGA MTP receivers | |||
Positive or negative (selectable at receiver) | |||
Audio | |||
Routing | 3 x 2 stereo matrix | ||
Gain | |||
MMX 32 VGA A | |||
Output 1 | Unbalanced output: 0 dB | ||
Output 2 | Unbalanced output: 0 dB; balanced output: +6 dB | ||
MMX 32 VGA MTP | |||
Output 1 (local output) | Unbalanced output: 0 dB | ||
Output 2a (CAT 5 receiver) | |||
Unbalanced output: +0 dB; balanced output: +6 dB | |||
Output 2b | Unbalanced output: +0 dB; balanced output: +6 dB | ||
Frequency response | 20 Hz to 20 kHz, ±0.05 dB | ||
THD + Noise | |||
MMX 32 VGA A | 0.03% @ 1 kHz, 0.3% @ 20 kHz nominal level | ||
MMX 32 VGA MTP | 0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level | ||
S/N | >90 dB at maximum output (unweighted) | ||
Crosstalk | |||
MMX 32 VGA A | <-80 dB @ 1 kHz, fully loaded | ||
MMX 32 VGA MTP | <-76 dB @ 1 kHz, fully loaded | ||
Stereo channel separation | |||
MMX 32 VGA A | >-90 dB @ 1 kHz | ||
MMX 32 VGA MTP | >-76 dB @ 1 kHz | ||
CMRR | >-75 dB @ 20 Hz to 20 kHz | ||
Audio input — MMX 32 VGA A, MMX 32 VGA MTP transmitter | |||
Number/signal type | 3 stereo, PC level, unbalanced | ||
Connectors | (3) 3.5 mm mini stereo jacks | ||
Impedance | |||
MMX 32 VGA A | 25k ohms balanced/unbalanced, DC coupled | ||
MMX 32 VGA MTP transmitter | |||
>3k ohms, balanced/unbalanced AC coupled | |||
Nominal level | -10 dBV (316 mVrms) | ||
Maximum level | +8.5 dBu, (unbalanced) at 1%THD+N | ||
|
|||
Audio output — MMX 32 VGA A, MMX 32 VGA MTP receivers | |||
Number/signal type | |||
MMX 32 VGA A | 2 stereo, balanced/unbalanced | ||
MMX 32 VGA MTP receivers | |||
2 stereo, balanced/unbalanced, PC level 1 summed stereo-to-mono on RJ-45 |
|||
Connectors | |||
MMX 32 VGA A | (1) 3.5 mm mini stereo audio jack (unbalanced) (1) 3.5 mm captive screw connector, 5 pole |
||
MMX 32 VGA MTP receivers | |||
(1) 3.5 mm mini-stereo audio jack (unbalanced) (1) 3.5 mm captive screw connector, 5 pole (1) RJ-45 |
|||
Impedance | 50 ohms unbalanced, 100 ohms balanced | ||
Gain error | ±0.1 dB channel to channel | ||
Maximum level (Hi-Z) | |||
MMX 32 VGA A | Program audio: >+21 dBu, balanced or unbalanced at 1% THD+N | ||
MMX 32 VGA MTP receivers, output 2 | |||
>+17 dBu, balanced or unbalanced at 1% THD+N | |||
Maximum level (600 ohm) | |||
MMX 32 VGA A | Program audio: >+14 dBm, balanced or unbalanced at 1% THD+N | ||
MMX 32 VGA MTP receivers, output 2 | |||
>+14 dBm, balanced or unbalanced at 1% THD+N | |||
Control/remote — switcher | |||
Serial control port | |||
MMX 32 VGA A | RS-232, 9-pin female D connector | ||
MMX 32 VGA MTP | RS-232, 3.5 mm captive screw connector, 3 pole | ||
Baud rate and protocol | 9600 baud, 8 data bits, 1 stop bit, no parity | ||
Serial control pin configurations | |||
MMX 32 VGA A | 2 = TX, 3 = RX, 5 = GND | ||
MMX 32 VGA MTP | 1 = TX, 2 = RX, 3 = GND | ||
Contact closure | |||
MMX 32 VGA A | 9-pin female D connector (also used as the serial control port) | ||
MMX 32 VGA MTP | (2) 3.5mm captive screw connectors, 5 pole | ||
Contact closure pin configurations | |||
MMX 32 VGA A | Output 1: 1= input 1, 4 = input 2, 6 = input 3, 5 = GND Output 2: 7= input 1, 8 = input 2, 9 = input 3, 5 = GND |
||
MMX 32 VGA MTP | Output 1: 1= input 1, 2 = input 2, 3 = input 3, 4 = GND, 5 = 5 VDC Output 2: 1= input 1, 2 = input 2, 3 = input 3, 4 = GND, 5 = 5 VDC |
||
Program control | Extron's control/configuration program for Windows® Extron's Simple Instruction Set (SIS™) |
||
General | |||
External power supply | 100 VAC to 240 VAC, 50/60 Hz, external, autoswitchable; to 12 VDC, 2 A, regulated | ||
Power input requirements | 12 VDC, 0.7 A | ||
Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
Cooling | Convection | ||
Rack mount | Yes, with optional 1U rack shelf, part #60-190-01 or 60-604-01; or VersaTools® rack shelf, part #60-190-20 or 60-604-20. Also furniture mountable with optional under-desk mounting kit #70-212-01. |
||
Enclosure type | Metal | ||
Enclosure dimensions | |||
MMX 32 VGA A | 1.75" H x 8.75" W x 3.0" D (1U high, half rack wide) 4.4 cm H x 22.2 cm W x 7.6 cm D (Depth excludes connectors.) |
||
MMX 32 VGA MTP | 1.75" H x 8.75" W x 6.0" D (1U high, half rack wide) 4.4 cm H x 22.2 cm W x 15.24 cm D (Depth excludes connectors.) |
||
Product weight | |||
MMX 32 VGA A | 2.5 lbs (1.1 kg) | ||
MMX 32 VGA MTP | 2.5 lbs (1.1 kg) (The twisted pair receiver is sold and shipped separately.) | ||
Shipping weight | 5 lbs (2.3 kg) per MMX 32 VGA A or per MMX 32 VGA MTP transmitter | ||
Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
Listings | UL, CUL | ||
Compliances | CE, FCC Class A, VCCI, AS/NZS, ICES | ||
MTBF | 30,000 hours | ||
Warranty | 3 years parts and labor | ||
|
|||
|