返回
概况 详情 推荐
null
null
巴可 大型场馆投影机-XDL-4K75图片
巴可 大型场馆投影机-XDL-4K75
厂家报价:价格面议
生产状态:(在产)
巴可BARCO
巴可BARCO
巴可BARCO是全球显示行业领先的技术公司,主要为娱乐、企业和医疗保健市场设计开发网络可视化和创新协作解决方案。巴可伟视(北京)电子有限公司为中国市场专业市场设计开发可视化解决方案:涉及控制室、国防与...
经销商 联系方式
巴可BARCO 400-000-9370、400-882-2726、010-80101166
影钛科技 010-84177765、84177781、84177065
  • 产品
  • 参数
  • 附件配件
  • 下载

  巴可 大型场馆投影机 XDL-4K75 产品图片:

  

 

  巴可 大型场馆投影机 XDL-4K75 产品介绍:

  We’re talking bright, real bright. With REC. 2020 colors that are just extraordinary.For bigger screens, more pixels, more impact. Plus incredible RGB laser performance, signal flexibility up to a comfortable 120 Hz, and no alignment.

  Images that speak

  Offer visitors crisper, more realistic contrast for greater impact with images of breathtaking depth thanks to their native 4K resolution up to 120Hz. And when you need it, use brightness up to a massive 75K lumens – the brightest on the planet.

  Cost-saving design

  Want to drive down your cost-per-lumen? A single XDL is the answer.  Their RGB laser light source slash image flicker and lamp-related costs and maintenance (such as lamp replacements). Compared to xenon projectors, the XDLs also consume 40% less power - and you can re-use your existing Barco XLD+ lenses. Truly reliable, expect a lifetime of up to 20,000 hours with minimum downtime.

  Easy to set up and use

  Installing one projector is always easier than having to install several. It means less equipment to transport and set up – and fewer possible points of failure. XDL speeds up installation by reducing alignment time. The projectors provide an exceptional lens shift of up to 100% so you can install them anywhere you like. You can also easily match images to your projection surface using on-board real-time warping and blending.

  巴可 大型场馆投影机 XDL-4K75 产品参数:

投影机类型 固有4K三芯片DLP数字投影仪,最高120 Hz
技术 1.38" DMD™ x3
分辨率 4096 x 2160
亮度 使用HC镜头最高70000中心流明/使用HB镜头最高75000中心流明
自然对比度 2800:1(标准值,使用HC镜片) /500:1 ANSI对比(标准值)|2000:1(标准值:使用HB镜片)/450:1 ANSI对比(标准值)
主镜头 HC:1.13-1.65; 1.35-1.86; 1.46-2.10; 1.65-2.60; 2.00-3.35 / HB :XLD 0.8,1.45-1.8,1.8-2.4,2.2-3.0,2.8-5.5,5.5-8.5
光学镜片移动 垂直:-100%至+100% / 水平:+/-40%(取决于镜头)
光源 直接耦合RGB激光3P
光源使用期限 15,000 hours
色彩纠正 P7
挡光板 标准
定位 倾斜 +/- 45度 | 旋转 – 20度 / +90度 (=纵向)
封装DLP™内核 标准
输入 插槽1:双HDBt;HDMI 2.0(HDCP 2.2);DP 1.2(HDCP 1.3);Quad SDI/HDSDI/双HDSDI/6G/BarcoLink
输入分辨率 从NTSC最高到4K(4096 x 2160)120 Hz
画中画 同时处理两个信号源
CLO(稳定光输出) 标准
ScenergiX 水平与垂直边缘融合,直接调节OSD + 工具组
图像处理 Embedded warp & blend engine
梯形纠正 Yes
集成网络服务器
软件工具 投影机工具组
控制 XLR有线 + IR、RS232、Wifi、GSM(可选)
网络连接 10/100 base-T、RJ-45 连接、Wifi (可选)
尺寸(宽x长x高) 投影仪:744 x 1445 x 706毫米 / 29.3 x 56.9 x 27.8英寸(包括支脚,无镜头)
两个冷却器,每个尺寸为:701 x 701 x 800毫米 / 27.6 x 27.6 x 31.5英寸
净重 Projector: 235kg (~520lb) / Chillers: ~115kg (~250lb) per chiller (two chillers needed)
冷却液软管长度 2.5-5-10米(8.2-16.4-32.8英尺)
电力要求 Projector:200-240/346-415V 50-60Hz 16A 3W+N+PE (Y connection) / Power cord size range: 4 sq mm to 6 sq mm, 10AWG to 8AWG /Circuit breaker range: 25A to 40A | 200-240V 3W+PE 28A 50-60Hz (/\- connection) / Power cord size: 6 sq mm, 8AWG / Circuit breaker: 40A
Chillers: 230/400V 3W+N+PE 16A, 2.5 sq mm (Y connection) or 208V / 3W+PE (/\- connection) / Max. 16A per phase
环境温度 35°C(95°F)最大(投影仪和冷却器)
工作湿度 0-80%(无冷凝)
功率消耗 投影仪 @ 全激光功率:6.7千瓦(2D或偏振式3D)/ 3.6千瓦(巴可Laser3D - 6P)
冷却器 @ 全激光功率:3.0千瓦(2D或偏振式3D)/ 2.5千瓦(巴可Laser3D - 6P)
3维系统 Active glasses systems / Polarization recuperation systems
安全等级 1级,RG3
证书 CE;ETL/UL/FCC
*注意 *Less than 20% decrease during a runtime of 15,000 hrs
暂无相关附件!!!
暂无相关下载!!!
更多巴可BARCO产品