经销商 | 联系方式 |
---|---|
巴可BARCO | 400-000-9370、400-882-2726、010-80101166 |
巴可 大型场馆投影机 XDL-4K60 产品介绍:
For bigger screens, more pixels, more impact. Plus incredible RGB laser performance, signal flexibility up to a comfortable 120 Hz, and no alignment.Plus incredible RGB laser performance, signal flexibility up to a comfortable 120 Hz, and no alignment.
Images that speak
Offer visitors crisper, more realistic contrast for greater impact with images of breathtaking depth thanks to their native 4K resolution up to 120Hz. And when you need it, use brightness up to a massive 60K lumens.
Cost-saving design
Want to drive down your cost-per-lumen? A single XDL is the answer. Their RGB laser light source slash image flicker and lamp-related costs and maintenance (such as lamp replacements). Compared to xenon projectors, the XDLs also consume 40% less power - and you can re-use your existing Barco XLD+ lenses. Truly reliable, expect a lifetime of up to 20,000 hours with minimum downtime.
Easy to set up and use
Installing one projector is always easier than having to install several. It means less equipment to transport and set up – and fewer possible points of failure. XDL speeds up installation by reducing alignment time. The projectors provide an exceptional lens shift of up to 100% so you can install them anywhere you like. You can also easily match images to your projection surface using on-board real-time warping and blending.
3D that really stands out
Get the absolute most impact with superb 3D performance based on color separation using twin wavelengths and a more effective use of light. Forget the issue of ghosting – there is none. And project onto white rather than silver screens.
巴可 大型场馆投影机 XDL-4K60 产品参数:
投影机类型 | 固有4K三芯片DLP数字投影仪,最高120 Hz |
---|---|
技术 | 1.38" DMD™ x3 |
分辨率 | 4096 x 2160 |
亮度 | Up to 56,000 center lumens using HC lenses / Up to 60,000 center lumens using HB lenses |
自然对比度 | 2,800:1 (typical using HC lenses) / 500:1 ANSI contrast (typical) | 2,000:1 (typical using HB lenses) / 450:1 ANSI contrast (typical) |
主镜头 | HC: 1.13-1.65; 1.35-1.86; 1.46-2.10; 1.65-2.60; 2.00-3.35 / HB : XLD 0.8,1.45-1.8,1.8-2.4,2.2-3.0,2.8-5.5,5.5-8.5 |
光学镜片移动 | 垂直:-100%至+100% / 水平:+/-40%(取决于镜头) |
光源 | 直接耦合RGB激光6P |
光源使用期限 | 20.000 hours* |
色彩纠正 | P7 |
挡光板 | 标准 |
定位 | Tilt 45° up and 30° downwards | Rotation – 20 degrees / +90 degrees (=Portrait) |
封装DLP™内核 | 标准 |
输入 | Slot 1 :Dual HDBt; HDMI 2.0 (HDCP 2.2); DP 1.2 (HDCP 1.3); Quad SDI/HDSDI/dual HDSDI/6G/BarcoLink | Slot 2: Quad DP1.2 |
输入分辨率 | 从NTSC最高到4K(4096 x 2160)120 Hz |
画中画 | 同时处理两个信号源 |
CLO(稳定光输出) | 标准 |
ScenergiX | 水平与垂直边缘融合 |
图像处理 | Embedded warp & blend engine |
梯形纠正 | Yes |
集成网络服务器 | 是 |
软件工具 | 投影机工具组 |
控制 | XLR有线 + IR、RS232、Wifi、GSM(可选) |
网络连接 | 10/100 base-T、RJ-45 连接、Wifi (可选) |
尺寸(宽x长x高) | Projector: 744 x 1,445 x 706 mm / 29.3 x 56.9 x 27.8 inches (with feet, no lens) | Two chillers, each with the following dimensions: 701 x 701 x 800 mm / 27.6 x 27.6 x 31.5 inches |
净重 | Projector: 235kg (~520lb) / Chillers: ~115kg (~250lb) per chiller (two chillers needed) |
冷却液软管长度 | 2.5-5-10米(8.2-16.4-32.8英尺) |
电力要求 |
Projector: 200-240/346-415V 50-60Hz 16A 3W+N+PE (Y connection) / Power cord size range: 4 sq mm to 6 sq mm, 10AWG to 8AWG /Circuit breaker range: 25A to 40A | 200-240V 3W+PE 28A 50-60Hz (/\- connection) / Power cord size: 6 sq mm, 8AWG / Circuit breaker: 40A Chillers: 230/400V 3W+N+PE 16A, 2.5 sq mm (Y connection) or 208V / 3W+PE (/\- connection) / Max. 16A per phase |
环境温度 | 35°C(95°F)最大(投影仪和冷却器) |
工作湿度 | 0-80%(无冷凝) |
功率消耗 |
投影仪 @ 全激光功率:6.7千瓦(2D或偏振式3D)/ 3.6千瓦(巴可Laser3D - 6P) 冷却器 @ 全激光功率:3.0千瓦(2D或偏振式3D)/ 2.5千瓦(巴可Laser3D - 6P) |
3维系统 | Color3D (Barco Laser3D): Native 6-primary color-3D system. Only requires color filter glasses / Active glasses systems / Polarization recuperation systems |
安全等级 | 1级,RG3 |
证书 | CE;ETL/UL/FCC |
*注意 | *Less than 20% decrease during a runtime of 20,000 hrs |