巴可 大型场馆投影机 XDL-4K30 产品介绍:
Plus incredible RGB laser performance, signal flexibility up to a comfortable 120 Hz, and no alignment.
Images that speak
Offer visitors crisper, more realistic contrast for greater impact with images of breathtaking depth thanks to their native 4K resolution up to 120Hz.
Cost-saving design
Want to drive down your cost-per-lumen? A single XDL is the answer. Their RGB laser light source slash image flicker and lamp-related costs and maintenance (such as lamp replacements). Compared to xenon projectors, the XDLs also consume 40% less power - and you can re-use your existing Barco XLD+ lenses. Truly reliable, expect a lifetime of up to 20,000 hours with minimum downtime.
Easy to set up and use
Installing one projector is always easier than having to install several. It means less equipment to transport and set up – and fewer possible points of failure. XDL speeds up installation by reducing alignment time. The projectors provide an exceptional lens shift of up to 100% so you can install them anywhere you like. You can also easily match images to your projection surface using on-board real-time warping and blending.
3D that really stands out
Get the absolute most impact with superb 3D performance based on color separation using twin wavelengths and a more effective use of light. Forget the issue of ghosting – there is none. And project onto white rather than silver screens.
巴可 大型场馆投影机 XDL-4K30 产品参数:
投影机类型 | 固有4K三芯片DLP数字投影仪,最高120 Hz |
---|---|
技术 | 1.38" DMD™ x3 |
分辨率 | 4096 x 2160 |
亮度 | 使用HC镜头最高28000中心流明/使用HB镜头最高30,000中心流明 |
自然对比度 | 2800:1(标准值,使用HC镜片) /500:1 ANSI对比(标准值)|2000:1(标准值:使用HB镜片)/450:1 ANSI对比(标准值) |
主镜头 | HC:1.13-1.65; 1.35-1.86; 1.46-2.10; 1.65-2.60; 2.00-3.35 / HB :XLD 0.8;1.45-1.8;1.8-2.4;2.2-3.0;2.8-5.5;5.5-8.5 |
光学镜片移动 | 垂直:-100%至+100% / 水平:+/-40%(取决于镜头) |
光源 | 直接耦合RGB激光6P |
光源使用期限 | 20,000 hrs* |
色彩纠正 | P7 |
挡光板 | 标准 |
定位 | 倾斜 +/- 45度 | 旋转 – 20度 / +90度 (=纵向) |
封装DLP™内核 | 标准 |
输入 | 插槽1:双HDBt;HDMI 2.0(HDCP 2.2);DP 1.2(HDCP 1.3);Quad SDI/HDSDI/双HDSDI/6G/BarcoLink | 插槽2:Quad DP1.2 |
输入分辨率 | 从NTSC最高到4K(4096 x 2160)120 Hz |
画中画 | 同时处理两个信号源 |
CLO(稳定光输出) | 标准 |
ScenergiX | 水平与垂直边缘融合,直接调节OSD + 工具组 |
图像处理 | Embedded warp & blend engine |
梯形纠正 | Yes |
集成网络服务器 | 是 |
软件工具 | 投影机工具组 |
控制 | XLR有线 + IR、RS232、Wifi、GSM(可选) |
网络连接 | 10/100 base-T、RJ-45 连接、Wifi (可选) |
尺寸(宽x长x高) | 投影仪:744 x 1445 x 706毫米 / 29.3 x 56.9 x 27.8英寸(包括支脚,无镜头) 一个冷却器,其尺寸如下:701 x 701 x 800毫米 / 27.6 x 27.6 x 31.5英寸 |
净重 | 投影仪:200千克(约440磅)/冷却器:~115千克(~250磅) |
冷却液软管长度 | 2.5-5-10米(8.2-16.4-32.8英尺) |
电力要求 |
投影仪:200-240/346-415V 50-60Hz 16A 3W+N+PE(Y连接)/ 电源线规格范围:4平方毫米至6平方毫米,10AWG至8AWG /断路器范围:25A至40A | 200-240V 3W+PE 28A 50-60Hz(/\-连接)/ 电源线规格:6平方毫米,8AWG /断路器:40A 冷却器:230/400V 3W+N+PE 16A,2.5平方毫米(Y连接)或208V / 3W+PE (/\-连接)/ 最大16A/相位 |
环境温度 | 35°C(95°F)最大(投影仪和冷却器) |
工作湿度 | 0-80%(无冷凝) |
功率消耗 |
投影仪 @ 全激光功率:3.5千瓦(2D或偏振式3D)/ 2.0千瓦(巴可Laser3D - 6P) 冷却器 @ 全激光功率:2.0千瓦(2D或偏振式3D)/ 1.6千瓦(巴可Laser3D - 6P) |
3维系统 | Color3D(巴可Laser3D):自然6原色3D系统。只需要彩色滤光眼镜/主动式眼镜系统/偏振恢复系统 |
安全等级 | 1级,RG3 |
证书 | CE;ETL/UL/FCC |
*注意 | *Less than 20% decrease during a runtime of 20,000 hrs |