| 经销商 | 联系方式 |
|---|---|
| Apart Audio | + 32 3 448 01 60 |
| 上海鸿禾 | 021-33031086 |
每一对输出都能够进行桥接以提供2 x 240W
(REVAMP4120T) 或2 x 480W (REVAMP4240T) 的输出
功率!
内置的限幅器能够保持输出处于安全限制范围之内。
智能化变速风扇只有在需要时才会工作(因此确保了产
品的安静性和免维护性)。
标配可拆卸19" 固定安装支架。
外观尺寸：2U，483 (宽) x 88 (高) x 332 (深) mm。
输入
4 个线路输入：
∙ Euroblock 平衡式接口
∙ RCA 非平衡式接口
每个通道都具有输入增益控制。
通过前面板和后面板的LED 指示灯来显示输入过载，更
方便安装使用。
每个通道在250HZ 都有一个高通滤波器，它可以通过
dip 切换开关来激活(使其更适合于100 伏号筒扬声器
的使用)。
输出
REVAMP4120T:
∙ 4 x 120W @ 100V 或@ 4Ω
∙ 2 x 240W @ 100V 或@ 8Ω
REVAMP4240T:
∙ 4 x 240W @ 100V 或@ 4Ω
∙ 2 x 480W @ 100V 或@ 8Ω
Euroblock 输出接口。
RCA 接口环接输出，用来连接另一台功率放大器。
| dynamic output power 4 ohms | 4 x 120 watts | RMS output power 4 ohms | 4 x 120 watts |
| dynamic output power 8 ohms | 4 x 60 watts | RMS output power 8 ohms | 4 x 60 watts |
| dynamic output power bridged 8 ohms | 2 x 240 watts | output power RMS bridged 8 ohms | 2 x 240 watts |
| output power RMS 100 volts | 4 x 120 watts | output power RMS bridged 100 volts | 2 x 240 watts |
| minimum impedance load per channel | 4 ohms | minimum impedance load bridged per channel | 8 ohms |
| power consumption (max) | 525 watts | 19" (483 mm wide) rack mounting | Yes |
| height- rack units (1U=44 mm) | 2 U | depth (build in) | 330 mm |
| depth (incl front) | 338 mm | power supply | 115 - 230 VAC volts |
| Power supply technology | switching mode power supply | output voltage tappings | 100 -70 - 50 - 35 - 4 Ohm watts |
| output channels | 4 | line input balanced | 4 |
| line input unbalanced | 4 | Channel separation | > 68 dB @ 1 kHz |
| Power amp topology | Class-D | frequency response (in Hz) | 50 - 20K |
| cooling system | fan | applicable in 100V | Yes |
| applicable low impedance | Yes | Net weight product (kg) | 12,10 |
| dynamic output power 4 ohms | 4 x 240 watts | RMS output power 4 ohms | 4 x 240 watts |
| dynamic output power 8 ohms | 4 x 120 watts | RMS output power 8 ohms | 4 x 120 watts |
| dynamic output power bridged 8 ohms | 2 x 480 watts | output power RMS bridged 8 ohms | 2 x 480 watts |
| output power RMS 100 volts | 4 x 240 watts | output power RMS bridged 100 volts | 2 x 480 watts |
| minimum impedance load per channel | 4 ohms | minimum impedance load bridged per channel | 8 ohms |
| power consumption (max) | 1050 watts | 19" (483 mm wide) rack mounting | Yes |
| height- rack units (1U=44 mm) | 2 U | depth (build in) | 330 mm |
| depth (incl front) | 338 mm | power supply | 115 - 230 VAC volts |
| Power supply technology | 2 x switching mode power supply | output voltage tappings | 100 - 70 - 50 - 35 - 4 Ohm watts |
| output channels | 4 | line input balanced | 4 |
| line input unbalanced | 4 | Channel separation | > 68 dB @ 1 kHz |
| Power amp topology | Class-D | frequency response (in Hz) | 50 - 20K |
| cooling system | fan | applicable in 100V | Yes |
| applicable low impedance | Yes | Net weight product (kg) | 16,70 |
首页