返回
概况 详情 推荐
null
null
矩阵切换器板-SMX HDMI Series图片
矩阵切换器板-SMX HDMI Series
厂家报价:价格面议
生产状态:(促销)
爱思创Extron电子
爱思创Extron电子
爱思创电子(上海)有限公司(爱思创Extron中国)全球总部位于美国加州,是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、...
经销商 联系方式
爱思创Extron电子 4000.398766、 021-3760 1568
  • 产品
  • 参数
  • 附件配件
  • 下载

  SMX HDMI 系列矩阵切换器板设计用于路由带有嵌入式音频和控制信号的 HDMI 视频信号。它们支持分辨率高达 1920x1200 的计算机视频和 1080p 的HDTV 视频,数据速率可达到 1.65 Gbps。SMX HDMI矩阵板符合 HDCP 标准,为外部外围设备的每路输出提供 +5 VDC、250 mA 的电源。可提供 4 种输入/输出尺寸:4x4、4x8、8x4 和 8x8。

特性

·支持分辨率高达 1920x1200 的计算机视频和1080p 的 HDTV 视频

·EDID 管理器可自动管理信号源与显示设备之间的显示 ID 通信

·为外部外围设备的每路输出提供 +5 VDC、250 mA的电源

·在 1920x1200 分辨率下可实现 100'(30 m)的输入电缆均衡

·自动输出时钟恢复

面板图

 

SMX System MultiMatrix Switchers
 
Video — composite video  (SMX 84/88/1616 V)
   Routing   
      SMX 84 V  8 x 4 matrix
      SMX 88 V  8 x 8 matrix
      SMX 1616 V  16 x 16 matrix
   Gain  Unity
   Bandwidth  150 MHz (-3 dB), fully loaded
   Differential phase error  1.0° at 3.58 MHz and 4.43 MHz
   Differential gain error  1.0% at 3.58 MHz and 4.43 MHz
   Crosstalk  -60 dB @ 5 MHz
   Switching speed  100 ms (max.)
 
Video input — composite video  (SMX 84/88/1616 V)
   Number/signal type  8 or 16 composite video
   Connectors  8 or 16 female BNC
   Nominal level  1 Vp-p for composite video
   Minimum/maximum levels  Analog: 0.1 V to 2.0 Vp-p with no offset
   Impedance  75 ohms
   Return loss  <-40 dB @ 5 MHz
   DC offset (max. allowable)  1.0 V
 
Video output — composite video  (SMX 84/88/1616 V)
   Number/signal type  4, 8, or 16 composite video
   Connectors  4, 8, or 16 BNC female
   Nominal level  1 Vp-p for composite video
   Minimum/maximum levels  0.1 V to 2.0 Vp-p (follows input)
   Impedance  75 ohms
   Return loss  <-40 dB @ 5 MHz
   DC offset  ±5 mV with input at 0 offset
 
Sync — composite video  (SMX 84/88/1616 V)
   Standards  NTSC 3.58, NTSC 4.43, PAL, SECAM
 
Video — S-video  (SMX 84/88/1616 SV, SMX 84/88/1616 YC)
   Routing   
      SMX 84 SV/YC  8 x 4 matrix
      SMX 88 SV/YC  8 x 8 matrix
      SMX 1616 SV/YC  16 x 16 matrix
   Gain  Unity
   Bandwidth  150 MHz (-3 dB), fully loaded
   Differential phase error  1.0° at 3.58 MHz and 4.43 MHz
   Differential gain error  1.0% at 3.58 MHz and 4.43 MHz
   Crosstalk  -60 dB @ 5 MHz
   Switching speed  100 ms (max.)
 
Video input — S-video  (SMX 84/88/1616 SV, SMX 84/88/1616 YC)
   Number/signal type  8 or 16 S-video
   Connectors   
      SMX 84/88/1616 SV  8 or 16 female 4-pin mini DIN
      SMX 84/88/1616 YC  8 or 16 x 2 female BNC
   Nominal level  1 Vp-p for Y S-video
0.3 Vp-p for C of S-video
   Minimum/maximum levels  Analog: 0.1 V to 2.0 Vp-p with no offset
   Impedance  75 ohms
   Return loss  <-40 dB @ 5 MHz
   DC offset (max. allowable)  1.0 V
 
Video output — S-video  (SMX 84/88/1616 SV, SMX 84/88/1616 YC)
   Number/signal type  4, 8, or 16 S-video
   Connectors   
      SMX 84/88/1616 SV  4, 8, or 16 female 4-pin mini DIN
      SMX 84/88/1616 YC  4, 8, or 16 x 2 female BNC
   Nominal level  1 Vp-p for Y S-video
0.3 Vp-p for C of S-video
   Minimum/maximum levels  0.1 V to 2.0 Vp-p (follows input)
   Impedance  75 ohms
   Return loss  <-40 dB @ 5 MHz
   DC offset  ±5 mV with input at 0 offset
 
Sync — S-video  (SMX 84/88/1616 SV, SMX 84/88/1616 YC)
   Standards  NTSC 3.58, NTSC 4.43, PAL, SECAM
 
Video — wideband  (SMX 84/88/1616 WB)
   Routing   
      SMX 84 WB  8 x 4 matrix
      SMX 88 WB  8 x 8 matrix
      SMX 1616 WB  16 x 16 matrix
   Gain  Unity
   Bandwidth  400 MHz (-3 dB), fully loaded
   Crosstalk
      8x8  -82 dB @ 1 MHz, -72 dB @ 5 MHz, -68 dB @ 10 MHz, -61 dB @30 MHz, -53 dB @ 100 MHz
      16x16  -74 dB @ 1 MHz, -64 dB @ 5 MHz, -56 dB @ 10 MHz, -48 dB @30 MHz, -38 dB @ 100 MHz
   Switching speed  200 ms (max.)
 
Video input — wideband  (SMX 84/88/1616 WB)
   Number/signal type  8 or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsB
   Connectors  8 or 16 female BNC
   Nominal level  0.7 Vp-p for RGB
   Minimum/maximum levels  Analog: 0.3 V to 1.5 Vp-p with no offset
   Impedance  75 ohms
   Horizontal frequency  15 kHz to 150 kHz
   Vertical frequency  30 Hz to 150 Hz
   Return loss  <-30 dB @ 5 MHz
   DC offset (max. allowable)  1.0 V
 
Video output — wideband  (SMX 84/88/1616 WB)
   Number/signal type  4, 8, or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsB
   Connectors  4, 8, or 16 female BNC
   Nominal level  0.7 Vp-p for RGB
   Minimum/maximum levels  0.3 V to 1.5 Vp-p (follows input)
   Impedance  75 ohms
   Return loss  <-30 dB @ 5 MHz
   DC offset  ±5 mV with input at 0 offset
   Switching type  Triple-Action
 
Sync — SMX 88 SYNC, SMX 88 H+V, SMX 1616 SYNC
   Input type   
      SMX 88 SYNC, SMX 1616 SYNC  Composite sync (S)
      SMX 88 H+V  Separate H and V sync
   Output type (follows input)   
      SMX 88 SYNC, SMX 1616 SYNC  Composite sync (S)
      SMX 88 H+V  Separate H and V sync
   Input level  0.5 V to 5.0 Vp-p, 4.0 Vp-p normal
   Output level  AGC to TTL: 4.0 V to 5.0 V p-p, unterminated
   Input impedance  510 ohms
   Output impedance  75 ohms
   Horizontal frequency  15 kHz to 150 kHz
   Vertical frequency  30 Hz to 150 Hz
   Max. propagation delay  35 ns
   Max. rise/fall time  4 ns
   Polarity  Positive or negative (follows input)
 
Video — VGA  (SMX 84/88/1616 VGA)
   Routing   
      SMX 84 VGA  8 x 4 matrix
      SMX 88 VGA  8 x 8 matrix
      SMX 1616 VGA  16 x 16 matrix
   Gain  Unity
   Bandwidth  350 MHz (-3 dB), fully loaded
   Crosstalk   
      8x8  -82 dB @ 1 MHz, -72 dB @ 5 MHz, -68 dB @ 10 MHz, -61 dB @30 MHz, -53 dB @ 100 MHz
      16x16  -74 dB @ 1 MHz, -64 dB @ 5 MHz, -56 dB @ 10 MHz, -48 dB @30 MHz, -38 dB @ 100 MHz
   Switching speed  200 ms (max.)
 
Video input — VGA  (SMX 84/88/1616 VGA)
   Number/signal type  8 or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsB
   Connectors  8 or 16 female 15-pin HD
   Nominal level  0.7 Vp-p for RGB
   Minimum/maximum levels  Analog: 0.3 V to 1.5 Vp-p with no offset
   Impedance  75 ohms
   Horizontal frequency  15 kHz to 150 kHz
   Vertical frequency  30 Hz to 150 Hz
   Return loss  <-36 dB @ 5 MHz
   DC offset (max. allowable)  1.0 V
 
Video output — VGA  (SMX 84/88/1616 VGA)
   Number/signal type  4, 8, or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsB
   Connectors  4, 8, or 16 female 15-pin HD
   Nominal level  0.7 Vp-p for RGB
   Minimum/maximum levels  0.3 V to 1.5 Vp-p (follows input)
   Impedance  75 ohms
   Return loss  <-36 dB @ 5 MHz
   DC offset  ±6 mV with input at 0 offset
   Switching type  Triple-Action
 
Sync — VGA  (SMX 84/88/1616 VGA)
   Input type  RGBHV, RGBS, RGsB, RsGsBs
   Output type  RGBHV, RGBS, RGsB, RsGsBs (follows input)
   Input level  0.5 V to 5.0 Vp-p, 4.0 Vp-p normal
   Output level  AGC to TTL: 4.0 V to 5.0 V p-p, unterminated
   Input impedance  510 ohms
   Output impedance  75 ohms
   Horizontal frequency  15 kHz to 150 kHz
   Vertical frequency  30 Hz to 150 Hz
   Max. propagation delay  40 ns
   Max. rise/fall time  18 ns
   Polarity  Positive or negative (follows input)
 
Digital video  — SMX 44/84/88/1616 SDI
   Routing   
      SMX 44 HD SDI  4 x 4 matrix
      SMX 84 HD SDI  8 x 4 matrix
      SMX 88 HD SDI  8 x 8 matrix
      SMX 1616 HD SDI  16 x 16 matrix
   Gain  Unity
   Maximum data rate  2.97 Gbps
   Data types  8 or 10 bit
   Operation standards  SMPTE 292M, SMPTE 259M, SMPTE 424M, ITU-RBT.601, ITU-RBT.1120
 
Digital video input  — SMX 44/84/88/1616 SDI
   Number/signal type  4, 8, or 16 single link SDI, HD-SDI; or dual link HD-SDI
   Connectors  4, 8, or 16 BNC female
   Nominal level  0.80 Vp-p ± 10%
   Impedance  75 ohms
   Return loss  <-15 dB @ 1 MHz to 1.5 GHz
   Equalization  Automatic
   Input cable equalization distance
      HD-SDI   
         Extron SHR, Belden 1694A cable  500' (152 m)
         Extron HR, Belden 1505A cable  400' (122 m)
      SDI   
         Extron SHR, Belden 1694A cable  750' (229 m)
         Extron HR, Belden 1505A cable  550' (168 m)
    NOTE     The transmission distance varies depending on the signal resolution and on the type of cable, graphic card, and display used in the system.
 
Digital video output  — SMX 44/84/88/1616 SDI
   Number/signal type  4, 8, or 16 single link SDI, HD-SDI; or dual link HD-SDI
   Connectors  4, 8, or 16 BNC female
   Nominal level  0.80 Vp-p ± 10%
   Impedance  75 ohms
   Return loss  <-15 dB @ 1 MHz to 1.5 GHz
   DC offset  ±0.5 V with input at 0 offset
   Re-clocking  Automatic, or use available bypass mode for nonstandard rates
   Jitter  <0.2 VI
   Rise/fall time (20-80%)   
      SDI  700 ps ±100 ps
      HD-SDI  250 ps ±100 ps
 
Video — SMX 44/48/84/88 DVI
    NOTE     *Appropriate DVI-D-to-HDMI cables or adapters are required for HDMI signal input/output.
   Routing
      SMX 44 DVI  4 x 4 matrix
      SMX 48 DVI  4 x 8 matrix
      SMX 84 DVI  8 x 4 matrix
      SMX 88 DVI  8 x 8 matrix
   Gain  Unity
   Maximum data rate  4.95 Gbps (1.65 Gbps per color)
   Maximum pixel clock  165 MHz
   Resolution range  Up to 1920x1200 @ 48, 50, or 60 Hz; or 1080p @ 60 Hz
   Signal type  Single link DVI digital video signals are supported.
      Digital video  RGB digital video (DVI standards), actively buffered (supports all single link DVI standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video)
       NOTE     These SMX DVI Series boards are not compatible with HDMI 1.3.
      Digital audio  Not supported
      Consumer Electronics Control (CEC)  Not supported
      EDID and DDC  Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards.  EDID and DDC signals are actively buffered.
      HDCP  Not supported
      HPD  Supports hot plug detection (HPD) of display as a pass-through signal.
   Standards  DVI 1.0, HDMI 1.2
   Switching speed  200 ns, max.
 
Video input — SMX 44/48/84/88 DVI
   Number/signal type  4 or 8 (depending on model) digital RGB single link DVI-D (or HDMI*)
   Connectors  4 or 8 female DVI-I
   Equalization  Automatic
   Input cable length  >50' (15.24 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p
    NOTE     The transmission distance varies depending on the signal resolution and on the type of cable, graphic card, and display used in the system.
 
Video output — SMX 44/48/84/88 DVI
   Number/signal type  4 or 8 (depending on model) digital RGB single link DVI-D (or HDMI*)
   Connectors  4 or 8 female DVI-I
   Re-clocking  Automatic
   Peripheral device power  250 mA per output
 
Video  — SMX 44/48/84/88 DVI PRO
    NOTE     *Appropriate DVI-D to HDMI cables or adapters are required for HDMI signal input/output.
   Routing   
      SMX 44 DVI PRO  4 x 4 matrix
      SMX 48 DVI PRO  4 x 8 matrix
      SMX 84 DVI PRO  8 x 4 matrix
      SMX 88 DVI PRO  8 x 8 matrix
   Gain  Unity
   Maximum data rate  4.95 Gbps (1.65 Gbps per color)
   Maximum pixel clock  165 MHz
   Resolution range  Up to 1080p (HDTV) or 1920x1200 (the highest resolution of the single link DVI standard) @ 60 Hz
   Signal type  Single link DVI digital video signals are supported.
      Digital video  RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered  (supports all single link DVI and HDMI (if using an optional adapter) standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video)
       NOTE     These SMX DVI PRO Series boards are not compatible with HDMI 1.3.
      Digital audio  Supports HDMI audio (if using an HDMI to DVI adapter) transmitted through the RGB and Y, Cr, Cb lines, actively buffered.
      Consumer Electronics Control (CEC)  Supports CEC wired infrared data pass-through using the HDMI 1.2 standard.
      EDID and DDC  Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered.
      HDCP  Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.2 standards
      HPD  Supports hot plug detection (HPD) of display as a pass-through signal.
   Maximum data rate  4.95 Gbps (1.65 Gbps per color)
   Maximum pixel clock  165 MHz
   Standards  DVI 1.0, HDMI 1.2
   Switching speed  200 ns, max.
 
Video input  — SMX 44/48/84/88 DVI PRO
   Number/signal type  4 or 8 (depending on model) digital RGB single link DVI-D (or HDMI*)
   Connectors  4 or 8 female DVI-I (digital only)
   Equalization  Automatic
   Input cable length  >50' (15.24 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p
 
Video output  — SMX 44/48/84/88 DVI PRO
   Number/signal type  4 or 8 (depending on model) digital RGB single link DVI-D (or HDMI*)
   Connectors  4 or 8 female DVI-I (digital only)
   Re-clocking  Automatic
   Peripheral device power  250 mA per output
 
Video  — SMX 44/48/84/88 HDMI
    NOTE     *Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output.
   Routing   
      SMX 44 HDMI  4 x 4 matrix
      SMX 48 HDMI  4 x 8 matrix
      SMX 84 HDMI  8 x 4 matrix
      SMX 88 HDMI  8 x 8 matrix
   Gain  Unity
   Maximum data rate  4.95 Gbps (1.65 Gbps per color)
   Maximum pixel clock  165 MHz
   Resolution range  Up to 1920x1200 or 1080p @ 60 Hz
   Signal type  Single link HDMI (or DVI-D*)
      Digital video  RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered  (supports all single link DVI (if using an optional adapter) and HDMI standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video)
       NOTE     These SMX HDMI Series boards are not compatible with HDMI 1.3.
      Digital audio  Supports HDMI audio transmitted through the RGB and Y, Cr, Cb lines, actively buffered.
      Consumer Electronics Control (CEC)  Supports CEC wired infrared data pass-through using the HDMI 1.2 standard.
      EDID and DDC  Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards.  EDID and DDC signals are actively buffered.
      HDCP  Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.2 standards
      HPD  Supports hot plug detection (HPD) of display as a pass-through signal.
   Maximum data rate  4.95 Gbps (1.65 Gbps per color)
   Maximum pixel clock  165 MHz
   Standards  DVI 1.0, HDMI 1.2
   Switching speed  200 ns, max.
 
Video input  — SMX 44/48/84/88 HDMI
   Number/signal type  4 or 8 (depending on model) digital RGB single link HDMI (or DVI-D*)
   Connectors  4 or 8 female HDMI type A
   Equalization  Automatic
   Input cable length  >50' (15.24 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p
 
Video output  — SMX 44/48/84/88 HDMI
   Number/signal type  4 or 8 (depending on model) digital RGB single link HDMI (or DVI-D*)
   Connectors  4 or 8 female HDMI type A
   Re-clocking  Automatic
   Peripheral device power  250 mA per output
 
Optical specifications  — SMX 88/1616 Fiber Optic I/O board
    NOTE     The fiber optic I/O cards are class 1 laser products. They meet the safety regulations of IEC-60825, FDA 21 CFR 1040.10, and FDA 21 CFR 1040.11.
   Number/type  8 or 16 single mode, or 8 or 16 multimode fiber optic inputs and outputs per I/O card
    NOTE     Only one fiber is required to transmit video, audio, and unidirectional data. A second fiber is required to transmit return data for bidirectional control/communication.
   Connectors  8 or 16 LC connectors per I/O card
   Operating distance  30 km (18.75 miles) with singlemode (SM) cables with a FOX 500 DA6 SM or FOX 500 TX/RX SM
0.15 km (492') with multimode (MM) cables with a FOX 500 DA6 MM or FOX 500 TX/RX MM
    NOTE     Operating distance is approximate.  These are typical distances.  The maximum distance may be greater than these typical numbers depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion,
   Nominal peak wavelength  850 nm for multimode (MM), 1310 nm for single mode (SM)
   Transmission power   
      Singlemode  -5 dBm, typical
      Multimode  -5 dBm, typical
   Optical loss budget   
      Singlemode  12 dB, maximum
      Multimode  7 dB, maximum
   Maximum channel data rate  4.25 Gbps
 
Video  — SMX 88/1616 Fiber Optic I/O board
   Routing  8 x 8 or 16 x 16 unidirectional (TX) matrix or
4 x 4 or 8 x 8 bidirectional (TX/RX) matrix
   Gain  Unity
   Pixel data bit depth  8 bits per channel, 3 channels (R, G, B)
   Maximum resolution  1600x1200 @ 60 Hz, digitized pixel for pixel; higher resolutions up to 2048x1120, undersampled
 
Video/audio input  — SMX 88/1616 Fiber Optic I/O board
   Number/signal type  8 or 16 fiber optic signals
   Connectors  8 or 16 LC connectors per I/O card
    NOTE     Input comes from an Extron FOX 500 TX transmitter, FOX 500 DA6, or FOX 500 DVI transmitter.
 
Video/audio output  — SMX 88/1616 Fiber Optic I/O board
   Number/signal type  8 or 16 fiber optic signals
   Connectors  8 or 16 LC connectors per I/O card
    NOTE     Output connects to an Extron FOX 500 RX receiver or FOX 500 DVI receiver.
 
Audio — SMX 84/88/1616A (analog)
   Routing   
      SMX 84 A  8 x 4 stereo matrix
      SMX 88 A  8 x 8 stereo matrix
      SMX 1616 A  16 x 16 stereo matrix
   Gain  Unbalanced output: -6 dB; balanced output 0 dB
   Frequency response  20 Hz to 20 kHz, ±0.05 dB
   THD + Noise  0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level
   S/N  >102 dB at maximum output (21 dBu, unweighted) (balanced)
   Crosstalk  <-95 dB @ 1 kHz, fully loaded
   Stereo channel separation  >98 dB @ 1 kHz
   CMRR  >70 dB @ 20 Hz to 20 kHz
 
Audio input — SMX 84/88/1616 A (analog)
   Number/signal type  8 or 16 stereo, balanced/unbalanced
   Connectors  (8 or 16) 3.5 mm captive screw connector, 5 pole
   Impedance  >10k ohms unbalanced/balanced, DC coupled
   Nominal level  0 dBu (0.775 Vrms)
   Maximum level  +19.5 dBu, (balanced or unbalanced) at 1% THD+N
   Input gain adjustment  –18 dB to +24 dB, adjustable per input; default = 0 dB
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
 
Audio output — SMX 84/88/1616 A (analog)
   Number/signal type  8 or 16 stereo, balanced/unbalanced
   Connectors  (8 or 16) 3.5 mm captive screw connector, 5 pole
   Impedance  50 ohms unbalanced, 100 ohms balanced
   Gain error  ±0.1 dB channel to channel
   Maximum level (Hi-Z)  >+21 dBu, balanced or unbalanced at 0.1% THD+N
   Maximum level (600 ohm)  >+15 dBm, balanced or unbalanced at 0.1% THD+N
   Volume control range  -76 dB to 0 dB (volume numbers 0 through 64) in a 35 dB increment from step 0 to step 1, then in 1 dB increments from steps 1 to 64; default = 64 (0 dB)
    NOTE     Attenuation = volume number minus 64. The default is 0 dB = volume number 64.
 
Control/remote — switcher host ports
   Serial host control port  1 bidirectional RS-232 or RS-422, rear panel 9-pin female D connector
1 bidirectional RS-232 front panel 2.5 mm mini stereo jack
   Baud rate and protocol  9600 (default), 19200, 38400, 115200 baud (rear port only), adjustable; 8 data bits, 1 stop bit, no parity
   Serial control pin configurations
      9-pin female D connector   
         RS-232  2 = TX, 3 = RX, 5 = GND
         RS-422  2 = TX-, 3 = RX-, 5 = GND, 7 = RX+, 8 = Tx+
      Mini stereo jack   
         RS-232  Tip = TX, ring = RX, sleeve = GND
   Ethernet control port  1 RJ-45 female
   Ethernet data rate (for network communication)
     10/100Base-T, half/full duplex with autodetect
   Ethernet protocol  ARP, DHCP, ICMP (ping), TCP/IP, Telnet, HTTP, SMTP
   Ethernet default settings  Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Default gateway = 0.0.0.0
DHCP = off
   Web server  Up to 200 simultaneous sessions
7.0 MB nonvolatile user memory
   Program control  Extron's control/configuration program for Windows®
Extron's Simple Instruction Set (SIS™)
Microsoft® Internet Explorer ver. 6 or higher, Telnet
 
General
   Power  100 VAC to 240 VAC, 50-60 Hz, 180 watts, internal
   Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling  Fan, left to right (as viewed from front panel)
   Rack mount  Yes
   Enclosure type  Metal
   Enclosure dimensions (Depth excludes connectors. Width excludes rack ears.)
      SMX 300 BME  5.25" H x 17.0" W x 12" D (3U high, full rack wide)
(13.3 cm H x 43.2 cm W x 30.5 cm D)
      SMX 400 BME  7.0" H x 17.0" W x 12" D (4U high, full rack wide)
(17.8 cm H x 43.2 cm W x 30.5 cm D)
      SMX 500 BME  8.75" H x 17.0" W x 12" D (5U high, full rack wide)
(22.2 cm H x 43.2 cm W x 30.5 cm D)
   Product weight with cards installed
      SMX 300 BME  18.1 lbs (8.2 kg)
      SMX 400 BME  20.3 lbs (9.2 kg)
      SMX 500 BME  23.9 lbs (10.8 kg)
   Shipping weight with cards installed
      SMX 300 BME  22 lbs (10 kg)
      SMX 400 BME  26 lbs (12 kg)
      SMX 500 BME  30 lbs (14 kg)
   DIM weight with cards installed, all models  25 lbs (12 kg)
   Vibration  ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance   
      Safety  CE, CUL, UL
      EMI/EMC  CE, C-tick, FCC Class A, ICES, VCCI
   MTBF  30,000 hours
   Warranty  3 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.

 

暂无相关附件!!!
暂无相关下载!!!
更多爱思创Extron电子产品