返回
爱思创电子(上海)有限公司_爱思创Extron中国
2 路输入 XTP 发送器 - 墙面板-XTP T UWP 302图片
2 路输入 XTP 发送器 - 墙面板-XTP T UWP 302
厂家报价:价格面议
生产状态:促销
爱思创Extron电子
爱思创Extron电子
爱思创电子(上海)有限公司(爱思创Extron中国)全球总部位于美国加州,是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、...
经销商 联系方式
爱思创Extron电子 4000.398766、 021-3760 1568
  • 产品
  • 参数
  • 附件配件
  • 下载

  XTP T UWP 302 是一款 2 路输入发送器,可通过单根 CATx 屏蔽电缆发送 HDMI 或VGA 视频、音频以及双向 RS-232 和红外信号至 100 m ( 330') 远的距离。该 XTP ® 发送器支持分辨率高达 1920x1200 的计算机和视频信号,包括 1080p/60 深色和 2K。它可将输入的模拟视频信号数字化,用于可靠的传输,分离的模拟立体声音频传输也可加嵌到 XTP 信号。其特性包括各路输入之间可选择优先级的自动切换,从而方便地在未托管的地方进行操作,以及用于远程设备控制的双向 RS-232 和红外插入功能。XTP T UWP 302 设计用于 XTP Systems ® ,通过 XTP CrossPoint ® 矩阵切换器供电。XTP T UWP 302 可安装在三单元接线盒中,提供便利接入的同时能同环境融为一体。

兼容的输入/输出板
XTP CP 输入/输出板 带 RS-232 和红外插入的 XTP 发送器和接收器板
相兼容的接收器
XTP R HWP 201 适用于墙面安装型显示器的 XTP 接收器,带 90° HDMI 连接器
可选附件
XTP DTP 24 用于 XTP Systems 和 DTP Systems 的屏蔽双绞线电缆
XTP DTP 24 插头 用于 Extron XTP DTP 24 屏蔽双绞线电缆的屏蔽 RJ-45 插头套件
XTP DTP 24 打线式插座 用于 Extron XTP DTP 24 屏蔽双绞线电缆的屏蔽 RJ-45 打线式插座套件
XTP DTP 24 耦合器 用于 Extron XTP DTP 24 屏蔽双绞线电缆的屏蔽 RJ-45 耦合器
XTP PI 100 用于 XTP 和 Pro 系列控制系统的电源合路器
XTP PI 400 用于 XTP 和 Pro 系列控制系统的四端口电源合路器
HDMI Ultra 系列 超柔韧极高速 HDMI 电缆
CTU 45 通用型 RJ-45 端接工具

  XTP T UWP 302 是一款 2 路输入发送器,可通过单根 CATx 屏蔽电缆发送 HDMI 或VGA 视频、音频以及双向 RS-232 和红外信号至 100 m ( 330') 远的距离。该 XTP ® 发送器支持分辨率高达 1920x1200 的计算机和视频信号,包括 1080p/60 深色和 2K。它可将输入的模拟视频信号数字化,用于可靠的传输,分离的模拟立体声音频传输也可加嵌到 XTP 信号。其特性包括各路输入之间可选择优先级的自动切换,从而方便地在未托管的地方进行操作,以及用于远程设备控制的双向 RS-232 和红外插入功能。XTP T UWP 302 设计用于 XTP Systems ® ,通过 XTP CrossPoint ® 矩阵切换器供电。XTP T UWP 302 可安装在三单元接线盒中,提供便利接入的同时能同环境融为一体。

  特性

  安装在标准三单元接线盒中

  通过单根 CATx 屏蔽电缆传输 HDMI 或数字化模拟视频、音频以及双向 RS-232 和红外信号至 100 m 远的距离

  HDMI 和 VGA 输入

  支持分辨率高达 1920x1200 的计算机和视频信号,包括 1080p/60 深色和 2K

  兼容 CATx 屏蔽双绞线电缆

  强烈建议使用 Extron XTP DTP 24 屏蔽双绞线电缆,以达到最佳的性能表现

  各路输入之间的自动切换

  模拟视频格式的数字转换

  用于视音频设备控制的双向 RS-232 和红外插入

  支持 HDMI 参数标准,包括高达 6.75 Gbps 的数据速率、高达 12 位的色深、3D 和高清无损的音频格式

  符合 HDCP 标准

  EDID 管理器 (EDID Minder ® ) 自动地管理已连接设备之间的 EDID 通信

  密钥管理器 (Key Minder ® ) 持续地验证 HDCP 标准,用于快速、可靠的切换

  支持远程供电

  支持多种嵌入的音频格式

  RS-232 控制

  可选择的模拟立体声音频输入加嵌

  音频输入增益及衰减

  支持 EDID 和 HDCP 传输

  显示信号存在、HDCP 和电源状态的 LED 指示灯

  用于 RJ-45 型 XTP 端口的信号和链接状态 LED 指示灯

  兼容所有的 XTP 产品

  前面板 USB 配置端口

  随附 LockIt ® HDMI 电缆紧固托架

  示意图

Product Diagram

  面板图

Panel Drawing

XTP T UWP 302
NOTE The XTPtransmitter can be used with other Extron XTP products, with twisted pair cables connecting the units.
NOTE *Appropriate DVI-D to HDMI or DisplayPort to HDMI cables or adapters are required for DVI or DisplayPortsignal input.
Video
Gain Unity
Resolution range
Digital Up to 1920x1200*, 2K, or 1080p (HDTV)
* reduced blanking
Analog Up to 1920x1200* or 1080p (HDTV)
* reduced blanking
Signal type Single-link HDMI (or DVI-D*)
Digital video RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single-link DVI (if using an optional adapter) and HDMI standards from 640x480 @ 60 Hz to1900x1200 @ 60 Hz)
EDID and DDC Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered.
HDCP Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI standards
HPD Supports hot plug detection (HPD) of display as a pass-through signal.
Maximum data rate 6.75 Gbps (2.25 Gbps per color)
Maximum pixel clock 165 MHz
Formats RGB and YCbCr digital video
Standards DVI 1.0, HDMI, HDCP 1.1
Video input
Number/signal type 1 analog RGBHV
1single link HDMI (DVI-D or DisplayPort*) input
Connectors 1 female 15-pin HD
1female HDMI type A
Nominal level 0.7 Vp-p for RGB
Minimum/maximum levels 0.3 V to 1.45 V p-p
Impedance 75 ohms
Horizontal frequency 30 kHz to 100 kHz
Vertical frequency 24 Hz to 120 Hz
Interconnection between transmitter and receiver
Connectors 1 female RJ-45 per unit
Termination standards TIA/EIA T568B
Signal transmission distance 330' (100 m) using shielded twisted pair or XTP DTP 24 cable
Cable requirements Solid conductor, 24 AWG or better
Cable recommendations 400 MHz bandwidth, STP (Shielded Twisted Pair)
NOTE Extron XTP DTP 24 shielded twisted pair cable is stongly recommended for optimal performance.
Audio
Gain
Range -18 dB to +24 dB
Default Unbalanced output: 0 dB; balanced output +6 dB
Frequency response 20 Hz to 20 kHz, ±0.05 dB
THD + Noise 0.01% @ 1 kHz at nominal level
S/N >90 dB, at maximum output, balanced (unweighted)
Crosstalk <-45 dB @ 20 kHz, -72 dB @ 1 kHz or below
Stereo channel separation >80 dB @ 20 Hz to 20 kHz
Sampling rates 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz
Bit depths 16, 20, 24 bit
Audio input
Number/signal type 1 analog stereo, unbalanced or
1digital audio, embedded from HDMI
Connectors 1 female 3.5 mm mini audio jack
1female HDMI type A (shared with video input)
Source formats LPCM up to 7.1/24-bit/192 kHz, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel
Impedance >10k ohms, unbalanced, DC coupled
Nominal level +4 dBu (1.23 mVrms) balanced or -10 dBV (316 mVrms) unbalanced
Maximum level +7 dBv unbalanced
NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV≈ 2 dBu
Communications — transmitter
Serial control port 1 bidirectional RS-232: 1 rear panel 3.5 mm captive screw connector, 3 pole
Baud rate and protocol 9600 (default) to 115200 baud, 8 data bits, 1 stop bit, no parity
Serial control pin configuration 1 = Tx, 2 = Rx, 3 = GND
USB control ports 1 side panel female mini USB B
USB standards USB 2.0, low speed
Program control Extron control/configuration program for Windows ®
Extron Simple Instruction Set (SIS )
Communications — external device (pass-through, unidirectional or bidirectional)
Serial control port input/output RS-232 (±5 V) via (1) 3.5 mm, 5 pole captive screw connector (uses 3 poles) (connector is shared with IR control port)
Serial control port output/input 1 set of proprietary signals on a female RJ-45 jack
Baud rates Up to 115200 baud
Protocol Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
Serial control pin configuration 1 = Tx, 2 = Rx, 3 = GND
IR control port (1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port)
TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 40 kHz
IR control pin configuration 3 = GND, 4 = IR Tx, 5 = IR Rx
General
Power supply External
Input: 100 to 240 VAC, 50-60 Hz
Output:12 VDC,1 A, 12 watts
Power consumption
Device 7.9 watts, 12 VDC
Device and power supply 9.0 watts, 100-240 VAC, 50-60 Hz
NOTE Each XTP switcher, transmitter, receiver can be powered either locally by an external power supply or remotely using an optional power injector.
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +104 °F (0 to +40 °C) / 10% to 90%, noncondensing
Cooling Convection, no vents
Thermal dissipation
Device 25.9 BTU/hr
Device and power supply 29.4 BTU/hr
Mounting
Furniture or wall mount Yes, with a US 3-gang electrical junction box
Enclosure type Metal
Enclosure dimensions
Faceplate 4.5" H x 6.4" W x 0.1" D (3-gang)
(11.5 cm H x 16.3 cm W x 0.3 cm D)
Device 2.5" H x 5.1" W x 1.9" D
(6.4 cm H x 13.0 cm W x 4.9 cm D)
(Depth excludes connectors. Fits some 3-gang boxes.)
Product weight 0.7 lbs (0.3 kg)
Shipping weight 3 lbs (1 kg)
Vibration ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety CE, c-UL, UL
EMI/EMC CE**, C-tick, FCC Class A**, ICES, VCCI
Environmental Complies with the appropriate requirements of RoHS, WEEE.
NOTE **CE and FCC testing is conducted with STP (shielded twisted pair) cable.
Warranty 3 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.
(8.1-082114-D5)
可选附件
XTP DTP 24 用于 XTP Systems 和 DTP Systems 的屏蔽双绞线电缆
XTP DTP 24 插头 用于 Extron XTP DTP 24 屏蔽双绞线电缆的屏蔽 RJ-45 插头套件
XTP DTP 24 打线式插座 用于 Extron XTP DTP 24 屏蔽双绞线电缆的屏蔽 RJ-45 打线式插座套件
XTP DTP 24 耦合器 用于 Extron XTP DTP 24 屏蔽双绞线电缆的屏蔽 RJ-45 耦合器
XTP PI 100 用于 XTP 和 Pro 系列控制系统的电源合路器
XTP PI 400 用于 XTP 和 Pro 系列控制系统的四端口电源合路器
HDMI Ultra 系列 超柔韧极高速 HDMI 电缆
CTU 45 通用型 RJ-45 端接工具
暂无相关下载!!!