返回
爱思创电子（上海）有限公司_爱思创Extron中国
用于 VGA 和 RS-232 的四合一 MTP 双绞线发送器-MTP 4T 15HD RS图片
用于 VGA 和 RS-232 的四合一 MTP 双绞线发送器-MTP 4T 15HD RS
厂家报价：价格面议
生产状态：促销
爱思创Extron电子
爱思创Extron电子
详情
爱思创电子（上海）有限公司（爱思创Extron中国）全球总部位于美国加州，是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、...
经销商 联系方式
爱思创Extron电子 4000.398766、 021-3760 1568
  • 产品
  • 参数
  • 附件配件
  • 下载

　　Extron MTP 15HD RS 系列是多用途双绞线发送器和接收器系列，用于在单根双绞线电缆上长距离传输高分辨率计算机视频和 RS-232 信号。所有型号均兼容高达 1920x1200 WUXGA 的分辨率，支持的 XGA 信号电缆传输距离可达 600'（185 m）或更远，UXGA 信号可达 450'（135 m）或更远。

相兼容的分配放大器
MTP DA4 和 MTP DA8 4 路和 8 路输出 MTP 双绞线分配放大器
可选附件
Skew-Free UTP 用于 Extron VT、MTP 和 TP 系列模拟双绞线产品的增强型 Skew-Free™ 等长视音频 UTP 电缆

　　Extron MTP 15HD RS 系列是多用途双绞线发送器和接收器系列，用于在单根双绞线电缆上长距离传输高分辨率计算机视频和 RS-232 信号。所有型号均兼容高达 1920x1200 WUXGA 的分辨率，支持的 XGA 信号电缆传输距离可达 600'（185 m）或更远，UXGA 信号可达 450'（135 m）或更远。

　　延长距离接收器

　　对于需要将信号传输至更远距离的视音频系统，MTP 1500RL 15HD RS 和 MTP 1500RL 15HD RS SEQ 两种型号的接收器可以通过单根 CAT 5 类电缆接收传输距离达 1500'（450 m）或更远的高分辨率视频以及传输距离达 1000'（300 m）的 RS-232 信号。

　　特性

　　通过单根 CAT 5 类电缆传输高分辨率视频和 RS-232 信号

　　传输距离为 600'（185 m）和 1500'（450 m）的不同接收器型号

　　兼容分辨率高达 1920x1200 的视频信号

　　适用于不同安装环境的多种产品规格

　　支持 RGBHV、RGBS、RGsB、RsGsBs、分量视频、S-视频和复合视频

　　与 HDTV 分量视频兼容，双电平或三电平同步

　　随附外置式通用电源，产品编号为 70-775-01

　　输入：4 个 15 针 HD 插座用于视频，螺丝锁定器用于 RS-232

　　输出：4 个 RJ-45 插座

　　4 个独立的发送器容纳在一个 1U 高、可机架安装的外壳中

　　峰值预调整电路，可在长距离电缆传输中优化视频信号

　　4 路本地监视器缓冲输出，每个发送器 1 路

　　可机架安装的 1U 高、1/4 机架宽的磨砂金属外壳

　　示意图

Product Diagram

　　面板图

Panel Drawing

MTP 4T 15HD RS
Video
Gain Unity
Number/signal type 4 sets of proprietary analog signals
Connectors 4 female RJ-45
Video input and loop through — per transmitter
Number/signal type 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video (with bi-level or tri-level sync), S-video, or composite video
1 buffered RGBHV, RGBS, RGsB, RsGsBs local monitor loop through (includes ID bits)
Connectors 2 female 15-pin HD
Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels 0.3 V to 1.45 Vp-p
Impedance 75 ohms
Horizontal frequency 15 kHz to 130 kHz
Vertical frequency 30 Hz to 150 Hz
Return loss <-30 dB @ 5 MHz
DC offset (max. allowable) 250 mV
Video output — see receivers' specifications
Sync
Input type (transmitter) RGBHV, RGBS, RGsB, RsGsBs, bi-level or tri-level for component video
Output type (receivers) RGBHV, RGBS, RGsB, RsGsBs
Standards NTSC 3.58, NTSC 4.43, PAL, SECAM
Input level (transmitter) 3.5 V to 5.5 Vp-p, unterminated
Output level (receivers) 4.0 V to 5.0 Vp-p, unterminated
Input impedance 510 ohms
Output impedance 110 ohms
Max. input voltage 5.5 Vp-p
Polarity Positive or negative
Control/remote — external device (pass-through, unidirectional or bidirectional)
Serial control port input/output RS-232 via (1) 3.5 mm, 3 pole captive screw connector
Serial control port output/input 1 set of proprietary signals on a female RJ-45 jack
NOTE The serial communications link of an MTP RL 15HD RS or MTP RL 15 HD RS SEQ is unidirectional only, transmitter to receiver, unless the receiver's directional jumper has been repositioned. The jumper should be repositioned only when the receiver is the only one in the system.
Baud rates Up to 38400 bps at up to 600' (183 m) (Higher data rates and distances are possible. Performance will vary based on baud rate and cable length.)
Protocol Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
NOTE Protocol is mirrored between the transmitter and the receiver.
Serial control pin configuration Captive screw connectors: 1 = TX, 2 = RX, 3 = GND
General
Recommended cable type CAT 5/5e/6 (shielded or unshielded)
Power 100 VAC to 240 VAC, 50-60 Hz, 20 watts, internal
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling Convection,no vents
Mounting
Rack mount Yes, with included mounting kit
Enclosure type Metal
Enclosure dimensions 1.7" H x 17.5" W x 8.5" D (1U high, full rack wide)
(4.3 cm H x 44.4 cm W x 21.6 cm D)
(Depth excludes connectors.)
Product weight 6.0 lbs (2.7 kg)
Shipping weight 10 lbs (5 kg)
Vibration ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety CE, c-UL, UL
EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
Warranty 3 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.
(7.6-111609-D6)
可选附件
Skew-Free UTP 用于 Extron VT、MTP 和 TP 系列模拟双绞线产品的增强型 Skew-Free™ 等长视音频 UTP 电缆
暂无相关下载!!!