返回
爱思创电子(上海)有限公司_爱思创Extron中国
用于 S-视频和音频的 MTP 双绞线发送器-MTP T SV A, & MTP T SV A RCA图片
用于 S-视频和音频的 MTP 双绞线发送器-MTP T SV A, & MTP T SV A RCA
厂家报价:价格面议
生产状态:促销
爱思创Extron电子
爱思创Extron电子
爱思创电子(上海)有限公司(爱思创Extron中国)全球总部位于美国加州,是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、...
经销商 联系方式
爱思创Extron电子 4000.398766、 021-3760 1568
  • 产品
  • 参数
  • 附件配件
  • 下载

  Extron MTP AV 系列发送器和接收器是价格经济、结构紧凑的产品,1/8 机架宽的外壳设计可以轻松地集成到新建和现有的视音频环境中。发送器和接收器可用于任何 CAT 5、5e 或 6 类电缆,或者用于 Extron 增强型等长(Skew- Free™)视音频 UTP 电缆,电缆传输距离可达 1,000'(300 m)或更远。MTP AV 系列外形小巧,可以安装在几乎任何位置:机架中、桌面下或显示设备旁边均可。发送器还提供了双格 AAP(结构化安装适配板尺寸)尺寸。

  Extron MTP AV 系列发送器和接收器是价格经济、结构紧凑的产品,1/8 机架宽的外壳设计可以轻松地集成到新建和现有的视音频环境中。发送器和接收器可用于任何 CAT 5、5e 或 6 类电缆,或者用于 Extron 增强型等长(Skew- Free™)视音频 UTP 电缆,电缆传输距离可达 1,000'(300 m)或更远。MTP AV 系列外形小巧,可以安装在几乎任何位置:机架中、桌面下或显示设备旁边均可。发送器还提供了双格 AAP(结构化安装适配板尺寸)尺寸。

  特性

  通过单根 CAT 5 类电缆在 1,000(' 300 m)或更远的距离上发送和接收 视音频信号

  提供用于带音频的复合视频或 S-视频的型号

  音频型号可配置为用于单声道或立体声

  与 MTP 系列切换器、矩阵切换器和分配放大器相兼容

  前后均带有 LED 电源指示器;AAP 型号仅限前面板

  配置为立体声音频时具有远程供电功能

  随附外置式通用电源,产品编号为 70-775-01

  输入:4 针微型 DIN 插座用于 S-视频,螺丝锁定器用于音频

  输入:4 针微型 DIN 插座用于 S-视频,RCA 插座用于音频

  输出:RJ-45 插座

  可机架安装的 1U 高、1/8 机架宽的金属外壳

  示意图

Product Diagram

  面板图

Panel Drawing

MTP AV Series
Video
Gain Unity
Differential phase error <1.0° at 3.58 MHz and 4.43 MHz
Differential gain error <1.0% at 3.58 MHz and 4.43 MHz
Video input
Number/signal type
MTP T AV Series 1 composite video
MTP T SV Series 1 S-video
MTP R AV/SV Series 1 set of proprietary analog signals
Connectors
MTP T AV Series 1 female BNC
MTP T AV AAP 1 female RCA
MTP T SV Series 1 female 4-pin mini DIN
MTP R AV/SV Series 1 female RJ-45
Nominal level 1 Vp-p for Y of S-video and for composite video
0.3 Vp-p for C of S-video
Minimum/maximum levels 0.3 V to 1.5 Vp-p with no offset
Impedance 75 ohms
Return loss <-30 dB, DC @ 10 MHz
DC offset (max. allowable) 100 mV
Video output
Number/signal type
MTP T AV/SV Series, MTP T AAP Series 1 set of proprietary analog signals
MTP R AV Series 1 composite video
MTP R SV Series 1 S-video
Connectors
MTP T AV/SV Series 1 female RJ-45
MTP T AAP Series 1 female RJ-45 on a 3" (7.6 cm) pigtail
MTP R AV Series 1 female BNC
MTP R SV Series 1 female 4-pin mini DIN
Nominal level 1 V p-p for Y of S-video and for composite video
0.3 V p-p for C of S-video
Minimum/maximum levels 0.3 V to 1.5 Vp-p
Impedance 75 ohms
Return loss <-35 dB @ 5 MHz
DC offset ±20mV with input at 0 offset
Sync
Standards NTSC 3.58, NTSC 4.43, PAL, SECAM
Audio
Gain
RCA models Unbalanced output: 0 dB (unity)
All other models Unbalanced output: 0 dB (unity); balanced output: +6 dB
Frequency response 20 Hz to 20 kHz, ±0.25 dB
THD + Noise 0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level
S/N
RCA models >90 dB, at maximum output (unweighted)
All other models w/audio >90 dB, balanced at maximum output (unweighted)
Crosstalk <-80 dB @ 1 kHz, fully loaded
Stereo channel separation >75 dB @ 1 kHz
CMRR >34 dB @ 20 Hz to 20 kHz
Audio input
Number/signal type
MTP T AV, MTP T SV A 1 stereo, balanced/unbalanced
MTP T AV/SV A RCA, MTP T AAP, MTP T 45 Series 1 stereo, unbalanced
MTP R Series 1 set of proprietary analog signals
Connectors
MTP T AV, MTP T SV A (1) 3.5 mm captive screw connector, 5 pole
MTP T AV/SV A RCA, MTP T AAP 1 pair of female RCA
MTP R Series 1 female RJ-45 (shielded)
Impedance >5.6k ohms±5% unbalanced, >10k ohms ±5% balanced
Nominal level -10 dBV (0.32 Vrms)
Maximum level >+2.4 dBu (balanced or unbalanced) at 1%THD+N
NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output
Number/signal type
MTP T Series 1 set of proprietary analog signals(all MTP T models)
MTP R AV, MTP R SV A 1 stereo or dual mono, balanced/unbalanced
MTP R AV/SV A RCA 1 stereo or dual mono, unbalanced
Connectors
MTP T Series 1 female RJ-45 (shielded)
MTP T AAP Series 1 female RJ-45 on a 3" (7.6 cm) pigtail
MTP R AV, MTP R SV A (1) 3.5 mm captive screw connector, 5 pole
MTP R AV/SV A RCA 1 pair of female RCA
Impedance
MTP R AV, MTP R SV A 50 ohms unbalanced, 100 ohms balanced
MTP R AV/SV A RCA 50 ohms unbalanced
Gain error ±0.1 dB channel to channel
Maximum level (Hi-Z) >+3.3 dBu, balanced or unbalanced at 1%THD+N
Maximum level (600 ohm) >+2.0 dBm, balanced or unbalanced at 1%THD+N
General
Recommended cable type CAT5/5e/6 (shielded or unshielded)
External power supply 100 VAC to 240 VAC, 50-Hz, external; to 12 VDC, 1.0 A, regulated
Power input requirements 12 VDC, 0.2 A
NOTE If the distance between the transmitter and receiver is less than 200' (61 m) and if the internal jumper is in setting 2, you can connect a power supply to only one device in a transmitter/receiver pair. If the distance between transmitter and receiver is greater than 200' (61 m) or if the internal jumper is in setting 1 (default), connect a power supply to each device.
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling Convection, no vents
Mounting
Rack mount
MTP T AAP Series Yes, with optional rack panel
All other models Yes, with optional 1U rack shelf
Furniture or wall mount
MTP T AAP Series Yes, with optional AAP mounting plates
All other models Yes, with optional brackets.
Enclosure type Metal
Enclosure dimensions (Depths exclude connectors and cables.)
MTP T AAP Series
Faceplate 1.4" H x 3.5" W x 0.1" D (3.6 cm H x 8.9 cm W x 0.3 cm D) (double space AAP plate)
Transmitter 1.35" H x 2.7" W x 1.3" D (3.4 cm H x 6.9 cm W x 3.3 cm D)
All other models 1.7" H x 2.2" W x 3.0" D (1U high, one-eighth rack wide)
(4.2 cm H x 5.6 cm W x 7.6 cm D)
Product weight 1.0 lbs (0.5 kg)
Shipping weight 3 lbs (2 kg)
Vibration ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety CE, c-UL, UL
EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
Product warranty 3 years parts and labor
Everlast power supply warranty 7 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.
(8.0-061112-D23)
暂无相关附件!!!
暂无相关下载!!!