返回
爱思创电子（上海）有限公司_爱思创Extron中国
用于 VGA 和 RS-232 的 MTP 双绞线 CAT 7 发送器-MTP C7 T 15HD RS图片
用于 VGA 和 RS-232 的 MTP 双绞线 CAT 7 发送器-MTP C7 T 15HD RS
厂家报价：价格面议
生产状态：促销
爱思创Extron电子
爱思创Extron电子
详情
爱思创电子（上海）有限公司（爱思创Extron中国）全球总部位于美国加州，是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、...
经销商 联系方式
爱思创Extron电子 4000.398766、 021-3760 1568
  • 产品
  • 参数
  • 附件配件
  • 下载

　　Extron MTP C7 15HD RS 是系列是多用途微型双绞线发送器和接收器系列，可以通过单根 CAT 7 双绞线电缆将 VGA 和 RS-232 串行控制信号长距离发送到演示系统中的显示设备。它们兼容高达 1920x1200 WUXGA 的分辨率，支持的 XGA 信号电缆传输距离可达 600'（185 m）或更远，UXGA 信号可达 450'（135 m）或更远。MTP C7 15HD RS 系列特别适用于需要将高分辨率视频信号长距离发送到显示设备而管道空间有限的系统，或者布线可能暴露在外的系统。理想的应用环境包括机场、博物馆、电影院和宾馆的公共信息显示。

可选附件
Skew-Free UTP 用于 Extron VT、MTP 和 TP 系列模拟双绞线产品的增强型 Skew-Free™ 等长视音频 UTP 电缆
PS 124 多路输出 12 V 直流电源
RSB 129 Basic Rack Shelf for 9.5" Deep Products

　　Extron MTP C7 15HD RS 是系列是多用途微型双绞线发送器和接收器系列，可以通过单根 CAT 7 双绞线电缆将 VGA 和 RS-232 串行控制信号长距离发送到演示系统中的显示设备。它们兼容高达 1920x1200 WUXGA 的分辨率，支持的 XGA 信号电缆传输距离可达 600'（185 m）或更远，UXGA 信号可达 450'（135 m）或更远。MTP C7 15HD RS 系列特别适用于需要将高分辨率视频信号长距离发送到显示设备而管道空间有限的系统，或者布线可能暴露在外的系统。理想的应用环境包括机场、博物馆、电影院和宾馆的公共信息显示。

　　注：仅支持 Extron DTP26 或 CAT 7 电缆。MTP C7 T 15HD RS 发送器仅与 MTP C7 RL 15HD RS 和 MTP C7 RL 15HD RS SEQ 接收器兼容。

　　特性

　　通过单根 CAT 7 电缆在 600'（185 m）或更远距离发送和接收高分辨率视 频和 RS-232 信号

　　兼容分辨率高达 1920x1200 的视频信号

　　支持 RGBHV、RGBS、RGsB、RsGsBs、分量视频、S-视频和复合视频

　　兼容 HDTV 分量视频，双电平或三电平同步

　　可机架安装的 1U 高、1/4 机架宽的金属外壳

　　多样化的安装选件

　　随附外置式通用电源，产品编号为 70-775-01

　　输入：15 针 HD 插座用于视频，螺丝锁定器用于 RS-232

　　输出：RJ-45 插座，用于 CAT 7 电缆

　　峰值预调整电路，可在长距离电缆传输中优化视频信号

　　本地监视器缓冲输出

　　可机架安装的 1U 高、1/4 机架宽的磨砂金属外壳

　　示意图

Product Diagram

　　面板图

Panel Drawing

MTP 15HD RS Series
Video
Gain Unity
Number/signal type
MTP 4T 15HD RS 4 sets of proprietary analog signals
All other models 1 set of proprietary analog signals
Connectors
MTP 4T 15HD RS 4 female RJ-45
MTP R 15HD RSA D 1 female RJ-45 on a pigtail
All other models 1 female RJ-45
Video input and loop-through — transmitter (MTP T 15HD RS, MTP C7 T 15HD RS, MTP 4T 15HD RS)
Number/signal type 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video (with bi-level or tri-level sync), S-video, or composite video
1 buffered RGBHV, RGBS, RGsB, RsGsBs local monitor loop through (includes ID bits)
Connectors 2 female 15-pin HD
Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels 0.3 V to 1.45 Vp-p
Impedance 75 ohms
Horizontal frequency 15 kHz to 130 kHz
Vertical frequency 30 Hz to 150 Hz
Return loss <-30 dB @ 5 MHz
DC offset (max. allowable) 250 mV
Video output — receivers
Number/signal type
MTP R 15HD RSA D 1 analog VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs, HD component video, component video, S-video, or composite video
All other receivers 1 set of proprietary analog signals
1 analog RGBHV, RGBS, RGsB, RsGsBs, component video (bi-/tri-level sync), S-video, or composite video
Connectors
MTP R 15HD RSA D 1 female 15-pin HD
All other receivers 1 female RJ-45
1 female 15-pin HD
Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels 0.3 V to 1.45 Vp-p
Impedance 75 ohms
Return loss <-30 dB @ 5 MHz
DC offset <±20 mV with input at 0 offset
Skew compensation 62 ns
Maximum resolution
MTP 1500RL 15HD RS SEQ Up to 1600x1200 and 1080p at 1500'
Up to 1920x1200 and 2048x1080 at 1200'
All other models Up to 1920x1200 or 2048x1080 or 1080p at 300'
Up to 1024x768 at 600'
NOTE Refer to the user guide for the maximum distances recommended for specific resolutions.
Sync
Input type (transmitter) RGBHV, RGBS, RGsB, RsGsBs
Output type (receivers) RGBHV, RGBS, RGsB, RsGsBs
Standards NTSC 3.58, NTSC 4.43, PAL, SECAM
Input level (transmitter) 3.5 V to 5.5 Vp-p, unterminated
Output level (receivers)
MTP 1500RL 15HD RS SEQ 0.3 Vp-p for component video (bi-level sync)
0.6 Vp-p for component video (tri-level sync)
TTL: 4.0 V to 5.0 V p-p, unterminated for RGBHV, RGBS
All other models 4.0 V to 5.0 Vp-p, unterminated
Input impedance
MTP C7 models 573 ohms
All other models 510 ohms
Output impedance
MTP C7 models 92 ohms ±8% (25 mA)
All other models 110 ohms
Polarity
Transmitter Positive or negative (follows input polarity)
Receivers Positive or negative (switch selectable)
Control/remote — external device (pass-through, unidirectional or bidirectional)
Serial control port input/output
MTP T 15HD RS, MTP C7 T 15HD RS, MTP 4T 15HD RS RS-232 via (1) 3.5 mm, 3 pole captive screw connector
MTP R 15HD RSA D, MTP C7 RL 15HD RS, MTP C7 RL 15HD RS SEQ 1 set of proprietary signals on a female RJ-45 jack
Serial control port output/input
MTP T 15HD RS, MTP C7 T 15HD RS, MTP 4T 15HD RS 1 set of proprietary signals on a female RJ-45 jack
MTP R 15HD RSA D RS-232 via 3 poles of a 3.5 mm captive screw connector, 5 pole
All other receivers RS-232 via a 3.5 mm, 3 pole captive screw connector
Baud rates
MTP R 15HD RSA D, MTP 1500RL 15HD RS SEQ Up to 38400 bps at up to 1000' (304.8 m)
All other models Up to 38400 bps at up to 600' (183 m)
NOTE Higher data rates and distances are possible. Performance varies based on baud rate and cable length.
Protocol Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
NOTE Protocol is mirrored between the transmitter and the receiver.
Serial control pin configuration Captive screw connectors: 1 = Tx, 2 = Rx, 3 = GND
General
Recommended cable type
Models other than C7 models CAT 5/5e/6 (shielded or unshielded)
Required cable type
MTP C7 15HD models Extron STP201 or CAT 7
Power supply
MTP 4T 15HD RS Internal
Input: 100-240 VAC, 50-60 Hz
All other models External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts
Power input requirements For models except MTP 4T 15HD RS
MTP 1500RL 15HD RS SEQ 12 VDC, 1.0 A max.
All other models 12 VDC, 0.5 A
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling
MTP 1500RL 15HD RS SEQ Convection, vents sides to top
All other models Convection, no vents
Mounting
Rack mount
MTP R 15HD RSA D No
MTP 4T 15HD RS Yes, with included mounting kit
All other models Yes, with optional 1U rack shelf
Furniture mount
MTP R 15HD RSA D Yes, using a standard electrical wall box or decorator-style size mud ring
MTP 1500RL 15HD RS SEQ No
All other models except MTP 4T 15HD RS Yes, with optional mini under-desk mounting kit
Wall mount
MTP 1500RL 15HD RS SEQ Yes, with optional wall mounting kit
Pole mount
MTP R 15HD RSA D No
MTP 1500RL 15HD RS SEQ No
All other models except MTP 4T 15HD RS Yes, with optional pole mounting kit
Enclosure type Metal
Enclosure dimensions
MTP R 15HD RSA D
Faceplate 2.6" H* x 1.3" W x 0.24" D
(6.6 cm H* x 3.3 cm W x 0.5 cm D)
*Overall height is 4.1" (10.4 cm) including mounting tabs.
(Fits the opening in a 1 gang, 4.4" H x 2.7" W decorator-style wallplate. Depth excludes connectors.)
Device 2.75" H x 1.65" W x 1.3" D
(7.0 cm H x 4.2 cm W x3.3 cm D)
(Depth excludes connectors.)
MTP 4T 15HD RS 1.7" H x 17.5" W x 8.5" D (1U high, full rack wide)
(4.3 cm H x 44.4 cm W x 21.6 cm D)
(Depth excludes connectors.)
MTP 1500RL 15HD RS SEQ 1.0" H x 8.75" W x 6.0" D (half rack wide)
(2.5 cm H x22.2 cm W x15.2 cm D)
(Depth excludes connectors.)
All other models 1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide)
(4.3 cm H x 10.9 cm W x 7.6 cm D)
(Depth excludes connectors.)
Product weight
MTP 4T 15HD RS 6.0 lbs (2.7 kg)
MTP 1500RL 15HD RS SEQ 1 lb (0.5 kg)
All other models 0.4 lbs (0.2 kg)
Vibration ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety CE, c-UL, UL
EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
Warranty 3 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.
(CMS-041917-D11)
可选附件
Skew-Free UTP 用于 Extron VT、MTP 和 TP 系列模拟双绞线产品的增强型 Skew-Free™ 等长视音频 UTP 电缆
PS 124 多路输出 12 V 直流电源
RSB 129 Basic Rack Shelf for 9.5" Deep Products
暂无相关下载!!!