返回
爱思创电子（上海）有限公司_爱思创Extron中国
用于 RGBHV 和音频并带输入环通的微型双绞线 CAT 7 接收器-MTP C7 RL 15HD A & MTP C7 RL 15HD A SEQ图片
用于 RGBHV 和音频并带输入环通的微型双绞线 CAT 7 接收器-MTP C7 RL 15HD A & MTP C7 RL 15HD A SEQ
厂家报价：价格面议
生产状态：促销
爱思创Extron电子
爱思创Extron电子
详情
爱思创电子（上海）有限公司（爱思创Extron中国）全球总部位于美国加州，是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、...
经销商 联系方式
爱思创Extron电子 4000.398766、 021-3760 1568
  • 产品
  • 参数
  • 附件配件
  • 下载

　　Extron MTP C7 15HD A 系列是多用途微型双绞线发送器和接收器系列，可以通过单根 CAT 7 电缆将 VGA 和合成单声道音频信号长距离发送到演示系统中的显示设备。它们兼容高达 1920x1200 WUXGA 的分辨率，支持的 XGA 信号电缆传输距离可达 600'（185 m）或更远，UXGA 信号可达 450'（135 m）或更远。MTP C7 15HD A 系列特别适用于需要将高分辨率视频信号长距离发送到显示设备而管道空间有限的系统，或者布线可能暴露在外的系统。理想的应用环境包括机场、博物馆、电影院和宾馆的公共信息显示。

可选附件
Skew-Free UTP 用于 Extron VT、MTP 和 TP 系列模拟双绞线产品的增强型 Skew-Free™ 等长视音频 UTP 电缆
MBU 123 用于 1/8、1/4 和 1/2 机架宽产品的薄型安装套件
MR 系列 模块化底圈
RSF 123 用于 3.5" 深产品的机架搁板套件
RSU 129 用于 9.5" 深产品的通用型机架搁板套件

　　Extron MTP C7 15HD A 系列是多用途微型双绞线发送器和接收器系列，可以通过单根 CAT 7 电缆将 VGA 和合成单声道音频信号长距离发送到演示系统中的显示设备。它们兼容高达 1920x1200 WUXGA 的分辨率，支持的 XGA 信号电缆传输距离可达 600'（185 m）或更远，UXGA 信号可达 450'（135 m）或更远。MTP C7 15HD A 系列特别适用于需要将高分辨率视频信号长距离发送到显示设备而管道空间有限的系统，或者布线可能暴露在外的系统。理想的应用环境包括机场、博物馆、电影院和宾馆的公共信息显示。

　　注：仅支持 Extron DTP26 或 CAT 7 类电缆。MTP C7 T 15HD A 发送器仅与 MTP C7 RL 15HD A 和 MTP C7 RL 15HD A SEQ 接收器兼容。

　　特性

　　可机架安装的 1U 高、1/4 机架宽的金属外壳

　　通过单根 CAT 5 类电缆传输高分辨率视频和单声道音频信号

　　传输距离为 600' (185 m)和 1500' (450 )的不同接收器型号

　　兼容分辨率高达 1920x1200 的高分辨率视频信号

　　适用于不同安装环境的多种产品规格

　　支持 RGBHV、RGBS、RGsB、RsGsBs、分量视频、S-视频和复合视频

　　与 HDTV 分量视频兼容，双电平或三电平同步

　　前面板上的 LED 电源指示器

　　随附外置式通用电源，产品编号为 70-775-01

　　输入：带缓冲环通的 RJ-45 插座，用于 CAT 7 电缆

　　输出：15 针 HD 插座用于视频，螺丝锁定器用于平衡/非平衡单声道音频

　　独立可变电平和峰值控制

　　缓冲 MTP CAT 7 输出，用于对多达 8 个接收器进行菊花链式连接

　　可对每种色彩进行独立的扭曲延时补偿调整

　　示意图

Product Diagram

　　面板图

Panel Drawing

MTP 15HD A Series Combo
Video
Gain Unity
Number/signal type 1 set of proprietary analog signals
Connectors
MTP R 15HD RSA D 1 female RJ-45 on a pigtail
All other models 1 female RJ-45
Video input and loop through — transmitters
Number/signal type
MTP T 15HD A, MTP C7 T 15HD A 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video
1 buffered RGBHV, RGBS, RGsB, RsGsBs local monitor loop through (includes ID bits)
MTP T 15HD A AAP, MTP T 15HD A D, MTP T 15HD A WM 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video
Connectors
MTP T 15HD A, MTP C7 T 15HD A 2 female 15-pin HD
All other transmitters 1 female 15-pin HD
Nominal level 1 Vp-p for Y of component video and
S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels 0.3 V to 1.45 Vp-p
Impedance 75 ohms
Horizontal frequency 15 kHz to 130 kHz
Vertical frequency 30 Hz to 150 Hz
Return loss <-30 dB @ 5 MHz
DC offset (max. allowable) 250 mV
Video output — receivers (MTP RL 15HD A, MTP RL 15HD A SEQ, MTP R 15HD RSA D, MTP 1500RL 15HDA SEQ. MTP C7RL 15HD A)
Number/signal type
MTP R 15HD RSA D 1 analog VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs, HD component video, component video, S-video, or composite video
All other receivers 1 set of proprietary analog signals
1 analog RGBHV, RGBS, RGsB, RsGsBs, component video (bi-/tri-level sync), S-video, or composite video
Connectors
MTP R 15HD RSA D 1 female 15-pin HD
All other receivers 1 female RJ-45
1 female 15-pin HD
Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels 0.3 V to 1.45 Vp-p
Impedance 75 ohms
Return loss <-30 dB @ 5 MHz
DC offset
MTP R 15HD RSA D <±20 mV with input at 0 offset
All other receivers <±35 mV with input at 0 offset
Skew compensation 62 ns
Maximum resolution
MTP 1500RL 15HD A SEQ Up to 1600x1200 and 1080p at 1500'
Up to 1920x1200 and 2048x1080 at 1200'
All other models Up to 1920x1200 or 2048x1080 or 1080p at 300'
Up to 1024x768 at 600'
NOTE Seethe user guide for the maximum distances recommended for specific resolutions.
Sync
Input type (transmitters) RGBHV, RGBS, RGsB, RsGsBs
Output type (receivers) RGBHV, RGBS, RGsB, RsGsBs
Standards NTSC 3.58, NTSC 4.43, PAL, SECAM
Input level (transmitter) 3.5 V to 5.5 Vp-p, unterminated
Output level (receivers) 4.0 V to 5.0 Vp-p, unterminated
Input impedance (transmitter) 573 ohms ±5%
Output impedance (receivers)
MTP C7 15HD models 92 ohms ±8% (25 mA)
All other models 110 ohms
Polarity
Transmitter Positive or negative (follows input polarity)
Receivers Positive or negative (switch-selectable)
Audio — all models
Number/signal type 1 set of proprietary analog signals
Connectors 1 female RJ-45
Gain Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response 20 Hz to 20 kHz, ±1 dB
THD + Noise 0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level
S/N >70 dB at maximum output (unweighted)
Stereo channel separation >60 dB @ 1 kHz
CMRR >43 dB @ 20 Hz to 20 kHz
Audio input — transmitters
Number/signal type 1 stereo, unbalanced
Connectors (1) 3.5 mm mini stereo jack
Impedance >10k ohms, unbalanced
Nominal level +4 dBu (1.23 Vrms), -10 dBV
(316 mVrms)
Maximum level
MTP C7 15HD models +12 dBu, (unbalanced) at 1%THD+N
All other models +18 dBu, (unbalanced) at 1%THD+N
NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output — MTP T 15HD A AAP, MTP T 15HD A D, MTP T 15HD A WM local stereo output
Number/signal type 1 stereo, balanced/unbalanced
Connectors (1) 3.5 mm direct insertion captive screw connector, 5 pole
Impedance 50 ohms unbalanced, 100 ohms balanced
Gain error ±1 dB channel to channel
Maximum level (Hi-Z) >+23 dBu, balanced or unbalanced at 1% THD+N
Maximum level (600 ohm) >+17 dBm, balanced or unbalanced at 1% THD+N
Audio output — receivers
Number/signal type
MTP R 15HD RSA D 1 mono, balanced/unbalanced
All other receivers 2 mono, balanced/unbalanced
Connectors
MTP R 15HD RSA D (1) 3.5 mm captive screw connector, 5 pole (uses 3 poles)
All other receivers (1) 3.5 mm captive screw connector, 5 pole
Impedance 50 ohms unbalanced, 100 ohms balanced
Gain error ±1 dB channel to channel
Nominal level +4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
Maximum level
MTP R 15HD RSA D 14 dBm, unbalanced at 1% THD+N
All other receivers +18 dBu, unbalanced at 1% THD+N
Control/remote — external device (pass-through, unidirectional or bidirectional) — MTP R 15HD RSA D only
Serial control port input/output 1 set of proprietary signals on a female RJ-45 jack
Serial control port output/input RS-232 via 3 poles of a 3.5 mm captive screw connector, 5 pole
Baud rates Up to 38400 bps at up to 600' (182.9 m) (Higher data rates and distances are possible. Performance varies based on baud rate and cable length.)
Protocol Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
NOTE Protocol is mirrored between the transmitter and the receiver.
Serial control pin configuration Captive screw connector: 1 = Tx, 2 = Rx,
3 = GND
General
Recommended cable type
Models other than C7 models CAT 5/5e/6 (shielded or unshielded)
Required cable type
MTP C7 15HD models ExtronSTP201 or CAT 7
Power supply External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts
Power input requirements
MTP 1500RL 15HD A SEQ 12 VDC, 1 A
All other models 12 VDC, 0.5 A
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling
MTP 1500RL 15HD A SEQ Convection, vents sides to top
All other models Convection, no vents
Mounting
Rack mount
MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ, MTP 1500RL 15HD A SEQ Yes, with optional 1U rack shelf
Furniture or wall mount
MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ Yes, with optional under-desk mounting kit
MTP T 15HD A AAP Yes, with optional AAP mounting faceplates that have double space high AAP opening
MTP T 15HD A D, MTP R 15HD RSA D Yes, in a decorator-style opening with a standard electrical wall box or decorator-style size mud ring
MTP T 15HD A WM Yes, in a 1-gang opening
Wall mount
MTP 1500RL 15HD models Yes, with optional wall mounting kit
Pole mount
MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ Yes, with optional pole mounting kit
Enclosure type Metal
Enclosure dimensions
MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ 1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide)
4.3 cm H x 10.9 cm W x 7.6 cm D
(Depth excludes connectors.)
MTP C7 15HD models 1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide)
(4.3 cm H x 10.9 cm W x 7.6 cm D)
(Depth excludes connectors and knobs.)
MTP 1500RL 15HD SEQ models 1.0" H x 8.75" W x 6.0" D (half rack wide)
(2.5 cm H x 22.2 cm W x 15.2 cm D)
(Depth excludes connectors.)
Faceplates
MTP T 15HD A AAP 1.4" H x 3.5" W x 0.1" D (3.6 cm H x 8.9 cm W x 0.3 cm D)
(double space high AAP plate)
MTP T 15HD A D, MTP R 15HD RSA D 2.6" H* x 1.3" W x 0.1" D (6.6 cm H* x 3.3 cm W x 0.3 cm D)
(Fits the opening in a 1 gang, 4.4" H x 2.7" W
decorator-style wallplate. Depth excludes connectors.)
*Overall height is 4.1" (10.4 cm) including mounting tabs.
MTP T 15HD A WM 4.5" H x 2.8" W x 0.1" D
(11.4 cm H x 7.1 cm W x 0.3 cm D)
(1 gang)
Device
MTP R 15HD RSA D 2.75" H x 1.65" W x 1.3" D
(7.0 cm H x 4.2 cm W x 3.3 cm D)
(Depth excludes connectors.)
Other AAP, D, and WM models 2.7" H x 1.4" W x 1.4" D
(6.9 cm H x 3.6 cm W x 3.6 cm D)
(Depth excludes connectors.)
Product weight
MTP 1500RL 15HD A SEQ 1 lb (0.5 kg)
All other models 0.4 lbs (0.2 kg)
Vibration ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety CE, c-UL, UL
EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
Product warranty 3 years parts and labor
Everlast power supply warranty 7 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.
(CMS-041917-D18)
可选附件
Skew-Free UTP 用于 Extron VT、MTP 和 TP 系列模拟双绞线产品的增强型 Skew-Free™ 等长视音频 UTP 电缆
MBU 123 用于 1/8、1/4 和 1/2 机架宽产品的薄型安装套件
MR 系列 模块化底圈
RSF 123 用于 3.5" 深产品的机架搁板套件
RSU 129 用于 9.5" 深产品的通用型机架搁板套件
暂无相关下载!!!