返回
爱思创电子（上海）有限公司_爱思创Extron中国
用于 VGA 和 RS-232 信号的 MTP 双绞线接收器-MTP RL 15HD RS 和 MTP RL 15HD RS SEQ图片
用于 VGA 和 RS-232 信号的 MTP 双绞线接收器-MTP RL 15HD RS 和 MTP RL 15HD RS SEQ
厂家报价：价格面议
生产状态：在产
爱思创Extron电子
爱思创Extron电子
详情
爱思创电子（上海）有限公司（爱思创Extron中国）全球总部位于美国加州，是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、...
经销商 联系方式
爱思创Extron电子 4000.398766、 021-3760 1568
  • 产品
  • 参数
  • 附件配件
  • 下载

　　Extron MTP 15HD RS 系列是多用途微型双绞线发送器和接收器系列，可通过单根非屏蔽双绞线电缆长距离传输 VGA 和 RS-232 串行控制信号至演示显示设备。它们兼容高达 1920 x 1200 (WUXGA) 的分辨率，支持的 VGA 信号电缆传输距离可达 185 m (600') 或更远，UXGA 信号可达 135 m (450') 或更远。

　　在那些需要将高分辨率视频信号长距离传输至管道空间有限的显示设备的系统中，或者布线会暴露及可见的系统中，MTP 15HD RS系列是理想之选。理想的应用场所包括机场的公共信息显示处、博物馆、电影院和旅馆。

快速参考
Everlast 电源 (宣传册)
MTP 15HD RS 系列 (宣传册)
相兼容的切换器和矩阵切换器
MTP SW6 6 路输入 MTP 双绞线切换器
相兼容的分配放大器
MTP DA4 和 MTP DA8 4 路和 8 路输出 MTP 双绞线分配放大器
可选附件
RSF 123 用于 3.5" 深产品的机架搁板套件
RSU 126 用于 6" 深产品的通用型机架搁板套件
MBU 123 用于 1/8、1/4 和 1/2 机架宽产品的薄型安装套件
PMK 100 用于 1/4 机架宽产品的杆式安装套件
PMK 300 用于 3 个 1/4 机架宽产品的多产品杆式安装套件
ZipClip 200 用于 1/8 和 1/4 机架宽产品的安装套件
PS 124 多路输出 12 V 直流电源
Skew-Free UTP 用于 Extron VT、MTP 和 TP 系列模拟双绞线产品的增强型 Skew-Free™ 等长视音频 UTP 电缆

　　Extron MTP 15HD RS 系列是多用途微型双绞线发送器和接收器系列，可通过单根非屏蔽双绞线电缆长距离传输 VGA 和 RS-232 串行控制信号至演示显示设备。它们兼容高达 1920 x 1200 (WUXGA) 的分辨率，支持的 VGA 信号电缆传输距离可达 185 m (600') 或更远，UXGA 信号可达 135 m (450') 或更远。

　　在那些需要将高分辨率视频信号长距离传输至管道空间有限的显示设备的系统中，或者布线会暴露及可见的系统中，MTP 15HD RS系列是理想之选。理想的应用场所包括机场的公共信息显示处、博物馆、电影院和旅馆。

　　特性

　　通过单根 CAT 5 类电缆在 185 m (600') 或更远的距离上接收高分辨率视频和 RS-232 信号

　　支持 RGBHV、RGBS、RGsB、RsGsBs、分量视频、S-视频和复合视频

　　兼容 HDTV 分量视频，双电平或三电平同步

　　独立的可变电平和峰值控制

　　MTP 缓冲输出，用于对多达 8 个接收器进行菊花链式连接

　　可对每种颜色进行独立的扭曲延时补偿调整 - 仅限 MTP RL 15HD RS SEQ

　　随附外置 Extron Everlast™ 电源，产品编号 #70-1174-01 — 该全球通用型电源具有经验证的高可靠性和低功耗

　　Extron Everlast 电源提供 7 年部件和人工保修

　　示意图

Product Diagram

　　面板图

Panel Drawing

MTP 15HD RS Series
Video
Gain Unity
Number/signal type
MTP 4T 15HD RS 4 sets of proprietary analog signals
All other models 1 set of proprietary analog signals
Connectors
MTP 4T 15HD RS 4 female RJ-45
MTP R 15HD RSA D 1 female RJ-45 on a pigtail
All other models 1 female RJ-45
Video input and loop-through — transmitter (MTP T 15HD RS, MTP C7 T 15HD RS, MTP 4T 15HD RS)
Number/signal type 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video (with bi-level or tri-level sync), S-video, or composite video
1 buffered RGBHV, RGBS, RGsB, RsGsBs local monitor loop through (includes ID bits)
Connectors 2 female 15-pin HD
Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels 0.3 V to 1.45 Vp-p
Impedance 75 ohms
Horizontal frequency 15 kHz to 130 kHz
Vertical frequency 30 Hz to 150 Hz
Return loss <-30 dB @ 5 MHz
DC offset (max. allowable) 250 mV
Video output — receivers
Number/signal type
MTP R 15HD RSA D 1 analog VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs, HD component video, component video, S-video, or composite video
All other receivers 1 set of proprietary analog signals
1 analog RGBHV, RGBS, RGsB, RsGsBs, component video (bi-/tri-level sync), S-video, or composite video
Connectors
MTP R 15HD RSA D 1 female 15-pin HD
All other receivers 1 female RJ-45
1 female 15-pin HD
Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels 0.3 V to 1.45 Vp-p
Impedance 75 ohms
Return loss <-30 dB @ 5 MHz
DC offset <±20 mV with input at 0 offset
Skew compensation 62 ns
Maximum resolution
MTP 1500RL 15HD models Up to 1600x1200 and 1080p at 1500'
Up to 1920x1200 and 2048x1080 at 1200'
All other models Up to 1920x1200 or 2048x1080 or 1080p at 300'
Up to 1024x768 at 600'
NOTE Refer to the user's manual for the maximum distances recommended for specific resolutions.
Sync
Input type (transmitter) RGBHV, RGBS, RGsB, RsGsBs
Output type (receivers) RGBHV, RGBS, RGsB, RsGsBs
Standards NTSC 3.58, NTSC 4.43, PAL, SECAM
Input level (transmitter) 3.5 V to 5.5 Vp-p, unterminated
Output level (receivers)
MTP 1500RL 15HD models 0.3 Vp-p for component video (bi-level sync)
0.6 Vp-p for component video (tri-level sync)
TTL: 4.0 V to 5.0 V p-p, unterminated for RGBHV, RGBS
All other models 4.0 V to 5.0 Vp-p, unterminated
Input impedance
MTP C7 models 573 ohms
All other models 510 ohms
Output impedance
MTP C7 models 92 ohms ±8% (25 mA)
All other models 110 ohms
Polarity
Transmitter Positive or negative (follows input polarity)
Receivers Positive or negative (switch selectable)
Control/remote — external device (pass-through, unidirectional or bidirectional)
Serial control port input/output
MTP T 15HD RS, MTP C7 T 15HD RS, MTP 4T 15HD RS RS-232 via (1) 3.5 mm, 3 pole captive screw connector
MTP R 15HD RSA D, MTP C7 RL 15HD RS, MTP C7 RL 15HD RS SEQ 1 set of proprietary signals on a female RJ-45 jack
Serial control port output/input
MTP T 15HD RS, MTP C7 T 15HD RS, MTP 4T 15HD RS 1 set of proprietary signals on a female RJ-45 jack
MTP R 15HD RSA D RS-232 via 3 poles of a 3.5 mm captive screw connector, 5 pole
All other receivers RS-232 via a 3.5 mm, 3 pole captive screw connector
Baud rates
MTP R 15HD RSA D, MTP 1500RL 15HD RS, MTP 1500RL 15HD RS SEQ Up to 38400 bps at up to 1000' (304.8 m)
All other models Up to 38400 bps at up to 600' (183 m)
NOTE Higher data rates and distances are possible. Performance varies based on baud rate and cable length.
Protocol Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
NOTE Protocol is mirrored between the transmitter and the receiver.
Serial control pin configuration Captive screw connectors: 1 = TX, 2 = RX, 3 = GND
General
Recommended cable type
Models other than C7 models CAT 5/5e/6 (shielded or unshielded)
Required cable type
MTP C7 15HD models Extron DTP26 or CAT 7
Power MTP 4T 15HD RS only: 100 VAC to 240 VAC, 50-60 Hz, 20 watts, internal
External power supply All models except MTP 4T 15HD RS:
100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A, regulated
Power input requirements For models except MTP 4T 15HD RS.
MTP 1500RL 15HD models 12 VDC, 1.0 A max.
All other models 12 VDC, 0.5 A
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling
MTP 1500RL 15HD models Convection, vents sides to top
All other models Convection, no vents
Mounting
Rack mount
MTP R 15HD RSA D No
MTP 4T 15HD RS Yes, with included mounting kit
All other models Yes, with optional 1U rack shelf
Furniture mount
MTP R 15HD RSA D Yes, using a standard electrical wall box or Decora ® size mud ring
MTP 1500RL 15HD models No
All other models except MTP 4T 15HD RS Yes, with optional mini under-desk mounting kit
Wall mount
MTP 1500RL 15HD models Yes, with optional wall mounting kit
Pole mount
MTP R 15HD RSA D No
MTP 1500RL 15HD models No
All other models except MTP 4T 15HD RS Yes, with optional pole mounting kit
Enclosure type Metal
Enclosure dimensions
MTP R 15HD RSA D
Faceplate 2.6" H* x 1.3" W x 0.24" D
(6.6 cm H* x 3.3 cm W x 0.5 cm D)
*Overall height is 4.1" (10.4 cm) including mounting tabs.
(Fits the opening in a 1 gang, 4.4" H x 2.7" W Decora ® -style wallplate. Depth excludes connectors.)
Device 2.75" H x 1.65" W x 1.3" D
(7.0 cm H x 4.2 cm W x3.3 cm D)
(Depth excludes connectors.)
MTP 4T 15HD RS 1.7" H x 17.5" W x 8.5" D (1U high, full rack wide)
(4.3 cm H x 44.4 cm W x 21.6 cm D)
(Depth excludes connectors.)
MTP 1500RL 15HD models 1.0" H x 8.75" W x 6.0" D (half rack wide)
(2.5 cm H x22.2 cm W x15.2 cm D)
(Depth excludes connectors.)
All other models 1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide)
(4.3 cm H x 10.9 cm W x 7.6 cm D)
(Depth excludes connectors.)
Product weight
MTP 4T 15HD RS 6.0 lbs (2.7 kg)
MTP 1500RL 15HD models 1 lb (0.5 kg)
All other models 0.4 lbs (0.2 kg)
Shipping weight
MTP 4T 15HD RS 10 lbs (5 kg)
All other models 2 lbs (1 kg)
Vibration ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety CE, c-UL, UL
EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
Product warranty 3 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.
(7.6-111909-D10)
可选附件
RSF 123 用于 3.5" 深产品的机架搁板套件
RSU 126 用于 6" 深产品的通用型机架搁板套件
MBU 123 用于 1/8、1/4 和 1/2 机架宽产品的薄型安装套件
PMK 100 用于 1/4 机架宽产品的杆式安装套件
PMK 300 用于 3 个 1/4 机架宽产品的多产品杆式安装套件
ZipClip 200 用于 1/8 和 1/4 机架宽产品的安装套件
PS 124 多路输出 12 V 直流电源
Skew-Free UTP 用于 Extron VT、MTP 和 TP 系列模拟双绞线产品的增强型 Skew-Free™ 等长视音频 UTP 电缆
暂无相关下载!!!