返回
爱思创电子(上海)有限公司_爱思创Extron中国
用于 VGA 和音频信号的 MTP 双绞线接收器-MTP RL 15HD A 和 MTP RL 15HD A SEQ图片
用于 VGA 和音频信号的 MTP 双绞线接收器-MTP RL 15HD A 和 MTP RL 15HD A SEQ
厂家报价:价格面议
生产状态:在产
爱思创Extron电子
爱思创Extron电子
爱思创电子(上海)有限公司(爱思创Extron中国)全球总部位于美国加州,是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、...
经销商 联系方式
爱思创Extron电子 4000.398766、 021-3760 1568
  • 产品
  • 参数
  • 附件配件
  • 下载

  Extron MTP 15HD A 系列是多用途 MTP双绞线发送器和接收器系列,可通过单根非屏蔽双绞线电缆长距离传输 VGA 和合成的单声道音频信号至演示显示设备。它们兼容高达 1920 x 1200 的分辨率,支持的 VGA 信号电缆传输距离可达 185 m (600') 或更远,UXGA 信号可达 135 m (450') 或更远。

  在那些需要将高分辨率视频信号长距离传输至管道空间有限的显示设备的系统中,或者布线会暴露及可见的系统中,MTP 15HD A系列是理想之选。理想的应用场所包括机场的公共信息显示处、博物馆、电影院和旅馆。

快速参考
Everlast 电源 (宣传册)
相兼容的发送器
MTP T 15HD A 用于 VGA 和音频并带 EDID 管理器 (EDID Minder®) 的 MTP 双绞线发送器
MTP T 15HD A D 用于 VGA 和音频并带 EDID 仿真的 MTP 双绞线发送器 - Decorator 型墙面板
MTP T 15HD A WM 用于 VGA 和音频信号的 MTP 双绞线发送器 - 墙面板型
MTP T 15HD A AAP 用于 VGA 和音频信号的 MTP 双绞线发送器 - AAP 型
相兼容的切换器和矩阵切换器
MTP SW6 6 路输入 MTP 双绞线切换器
相兼容的分配放大器
MTP DA4 和 MTP DA8 4 路和 8 路输出 MTP 双绞线分配放大器
可选附件
RSU 126 用于 6" 深产品的通用型机架搁板套件
RSF 123 用于 3.5" 深产品的机架搁板套件
MBU 123 用于 1/8、1/4 和 1/2 机架宽产品的薄型安装套件
PMK 100 用于 1/4 机架宽产品的杆式安装套件
PMK 300 用于 3 个 1/4 机架宽产品的多产品杆式安装套件
ZipClip 200 用于 1/8 和 1/4 机架宽产品的安装套件
PS 124 多路输出 12 V 直流电源
Skew-Free UTP 用于 Extron VT、MTP 和 TP 系列模拟双绞线产品的增强型 Skew-Free™ 等长视音频 UTP 电缆

  Extron MTP 15HD A 系列是多用途 MTP双绞线发送器和接收器系列,可通过单根非屏蔽双绞线电缆长距离传输 VGA 和合成的单声道音频信号至演示显示设备。它们兼容高达 1920 x 1200 的分辨率,支持的 VGA 信号电缆传输距离可达 185 m (600') 或更远,UXGA 信号可达 135 m (450') 或更远。

  在那些需要将高分辨率视频信号长距离传输至管道空间有限的显示设备的系统中,或者布线会暴露及可见的系统中,MTP 15HD A系列是理想之选。理想的应用场所包括机场的公共信息显示处、博物馆、电影院和旅馆。

  特性

  通过单根 CAT 5 类电缆在 185 m (600') 或更远的距离上接收高分辨率视频和单声道音频信号

  支持 RGBHV、RGBS、RGsB、RsGsBs、分量视频、S-视频和复合视频

  兼容 HDTV 分量视频,双电平或三电平同步

  独立的可变电平和峰值控制

  MTP 缓冲输出,用于对多达 8 个接收器进行菊花链式连接

  可对每种颜色进行独立的扭曲延时补偿调整 - 仅限 MTP RL 15HD A SEQ

  随附外置 Extron Everlast™ 电源,产品编号 #70-1175-01 — 该全球通用型电源具有经验证的高可靠性和低功耗,能够降低运行成本

  Extron Everlast 电源可享受 7 年部件及人工保修

  示意图

Product Diagram

  面板图

Panel Drawing

MTP 15HD A Series
Video
Gain Unity
Number/signal type 1 set of proprietary analog signals
Connectors
MTP R 15HD RSA D 1 female RJ-45 on a pigtail
All other models 1 female RJ-45
Video input and loop through — transmitters
Number/signal type
MTP T 15HD A 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video
1 buffered RGBHV, RGBS, RGsB, RsGsBs local monitor loop through (includes ID bits)
MTP T 15HD A AAP, MTP T 15HD A D, MTP T 15HD A WM 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video
Connectors
MTP T 15HD A 2 female 15-pin HD
All other transmitters 1 female 15-pin HD
Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels 0.3 V to 1.45 Vp-p
Impedance 75 ohms
Horizontal frequency 15 kHz to 130 kHz
Vertical frequency 30 Hz to 150 Hz
Return loss <-30 dB @ 5 MHz
DC offset (max. allowable) 250 mV
Video output — receivers (MTP RL 15HD A, MTP RL 15HD A SEQ, MTP R 15HD RSA D)
Number/signal type
MTP R 15HD RSA D 1 analog VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs, HD component video, component video, S-video, or composite video
All other receivers 1 set of proprietary analog signals
1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video
Connectors
MTP R 15HD RSA D 1 female 15-pin HD
All other receivers 1 female RJ-45
1 female 15-pin HD
Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels 0.3 V to 1.45 Vp-p
Impedance 75 ohms
Return loss <-30 dB @ 5 MHz
DC offset
MTP R 15HD RSA D <±20 mV with input at 0 offset
All other receivers <±35 mV with input at 0 offset
Skew compensation 62 ns
Maximum resolution Up to 1920x1200 or 2048x1080 or 1080p at 300'
Up to 1024x768 at 600'
NOTE See the user guide for the maximum distances recommended for specific resolutions.
Sync
Input type (transmitters) RGBHV, RGBS, RGsB, RsGsBs
Output type (receivers) RGBHV, RGBS, RGsB, RsGsBs
Standards NTSC 3.58, NTSC 4.43, PAL, SECAM
Input level (transmitter) 3.5 V to 5.5 Vp-p, unterminated
Output level (receivers) 4.0 V to 5.0 Vp-p, unterminated
Input impedance (transmitter) 573 ohms ±5%
Output impedance (receivers) 110 ohms
Max. input voltage (transmitter) 5.5 V p-p
Polarity
Transmitter Positive or negative (follows input polarity)
Receivers Positive or negative (switch-selectable)
Audio — all models
Number/signal type 1 set of proprietary analog signals
Connectors 1 female RJ-45
Gain Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response 20 Hz to 20 kHz, ±1 dB
THD + Noise 0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level
S/N >70 dB at maximum output (unweighted)
Stereo channel separation >60 dB @ 1 kHz
CMRR >43 dB @ 20 Hz to 20 kHz
Audio input — transmitters
Number/signal type 1 stereo, unbalanced
Connectors (1) 3.5 mm mini stereo jack
Impedance >10k ohms, unbalanced
Nominal level +4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
Maximum level +18 dBu, (unbalanced) at 1%THD+N
NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output — MTP T 15HD A AAP, MTP T 15HD A D, MTP T 15HD A WM local stereo output
Number/signal type 1 stereo, balanced/unbalanced
Connectors (1) 3.5 mm direct insertion captive screw connector, 5 pole
Impedance 50 ohms unbalanced, 100 ohms balanced
Gain error ±1 dB channel to channel
Maximum level (Hi-Z) >+23 dBu, balanced or unbalanced at 1% THD+N
Maximum level (600 ohm) >+17 dBm, balanced or unbalanced at 1% THD+N
Audio output — receivers
Number/signal type
MTP R 15HD RSA D 1 mono, balanced/unbalanced
All other receivers 2 mono, balanced/unbalanced
Connectors
MTP R 15HD RSA D (1) 3.5 mm captive screw connector, 5 pole (uses 3 poles)
All other receivers (1) 3.5 mm captive screw connector, 5 pole
Impedance 50 ohms unbalanced, 100 ohms balanced
Gain error ±1 dB channel to channel
Nominal level +4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
Maximum level
MTP R 15HD RSA D 14 dBm, unbalanced at 1% THD+N
All other receivers +18 dBu, unbalanced at 1% THD+N
Control/remote — external device (pass-through, unidirectional or bidirectional) — MTP R 15HD RSA D only
Serial control port input/output 1 set of proprietary signals on a female RJ-45 jack
Serial control port output/input RS-232 via 3 poles of a 3.5 mm captive screw connector, 5 pole
Baud rates Up to 38400 bps at up to 1000' (304.8 m) (Higher data rates and distances are possible. Performance varies based on baud rate and cable length.)
Protocol Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
NOTE Protocol is mirrored between the transmitter and the receiver.
Serial control pin configuration Captive screw connector: 1 = Tx, 2 = Rx, 3 = GND
General
Recommended cable type CAT 5/5e/6 (shielded or unshielded)
Power supply External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1.5 A, 18 watts
Power input requirements 12 VDC, 0.5 A
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling Convection, no vents
Mounting
Rack mount
MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ Yes, with optional rack shelf
Furniture or wall mount
MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ Yes, with optional under-desk mounting kit
MTP T 15HD A AAP Yes, with optional AAP mounting faceplates that have double space high AAP opening
MTP T 15HD A D, MTP R 15HD RSA D Yes, in a decorator-style opening with a standard electrical wall box orstandard 1-gang USsize mud ring
MTP T 15HD A WM Yes, in a 1-gang opening
Pole mount
MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ Yes, with optional pole mounting kit
Enclosure type Metal
Enclosure dimensions
MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ 1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide)
4.3 cm H x 10.9 cm W x 7.6 cm D
(Depth excludes connectors.)
Faceplates
MTP T 15HD A AAP 1.4" H x 3.5" W x 0.1" D (3.6 cm H x 8.9 cm W x 0.3 cm D)
(double space high AAP plate)
MTP T 15HD A D, MTP R 15HD RSA D 2.6" H* x 1.3" W x 0.1" D (6.6 cm H* x 3.3 cm W x 0.3 cm D)
(Fits the opening in a 1 gang, 4.4" H x 2.7" W decorator-style wallplate. Depth excludes connectors.)
*Overall height is 4.1" (10.4 cm) including mounting tabs.
MTP T 15HD A WM 4.5" H x 2.8" W x 0.1" D (11.4 cm H x 7.1 cm W x 0.3 cm D) (1 gang)
Device
MTP R 15HD RSA D 2.75" H x 1.65" W x 1.3" D
(7.0 cm H x 4.2 cm W x 3.3 cm D)
(Depth excludes connectors.)
Other AAP, D, and WM models 2.7" H x 1.4" W x 1.4" D (6.9 cm H x 3.6 cm W x 3.6 cm D)
(Depth excludes connectors.)
Product weight 0.4 lbs (0.2 kg)
Regulatory compliance CE, C-tick, c-UL, UL, FCC Class A, ICES, VCCI
Product warranty 3 years parts and labor
Everlast power supply warranty 7 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.
(4327-D18)
可选附件
RSU 126 用于 6" 深产品的通用型机架搁板套件
RSF 123 用于 3.5" 深产品的机架搁板套件
MBU 123 用于 1/8、1/4 和 1/2 机架宽产品的薄型安装套件
PMK 100 用于 1/4 机架宽产品的杆式安装套件
PMK 300 用于 3 个 1/4 机架宽产品的多产品杆式安装套件
ZipClip 200 用于 1/8 和 1/4 机架宽产品的安装套件
PS 124 多路输出 12 V 直流电源
Skew-Free UTP 用于 Extron VT、MTP 和 TP 系列模拟双绞线产品的增强型 Skew-Free™ 等长视音频 UTP 电缆
暂无相关下载!!!