| 经销商 | 联系方式 |
|---|---|
| 爱思创Extron电子 | 4000.398766、 021-3760 1568 |
Extron TLC Pro 521M 是一款便捷的一体式 5" 墙面安装型触摸屏，带 1 个内置的控制处理器。这款易于使用、完全可配置的 TouchLink ® 控制器将色彩艳丽的电容式触摸屏与强大的视音频系统控制和增强的安全性相结合。TLC Pro 521M 与 TLP Pro 520M TouchLink Pro 触摸屏采用同样高灵敏度的电容式触摸屏，并且增加了一个安全、功能强大的控制处理器，这样其紧凑的外壳内就集成了一个功能丰富的触摸屏控制器。为了便于集成，以太网供电 (PoE) 功能可使触摸屏通过单根以太网电缆获取电源及进行通信。在既需要有直观的触摸屏，又需要具有 MediaLink Plus 控制器的灵活控制选项的教室、董事会议室或其它演示环境，TLC Pro 521M 无疑是理想之选。
| 可选附件 | ||
|---|---|---|
| SMA-1 | 旋转式安装适配器 | |
| TLM 520 | Bezel Kits for TLP Pro 520M, TLC Pro 521M, and TLS 520M | |
| XTP PI 100 | 用于 XTP 和 Pro 系列控制系统的电源合路器 | |
| 兼容的软件 | ||
|---|---|---|
| Global Configurator Plus 和 Global Configurator Professional | 用于视音频控制系统的强大配置软件 | |
| GUI Designer | 免费的用户界面设计软件 | |
| Extron Control | 用于 TouchLink、eBUS、网络按键面板和 MediaLink 的控制应用程序 | |
Extron TLC Pro 521M 是一款便捷的一体式 5" 墙面安装型触摸屏，带 1 个内置的控制处理器。这款易于使用、完全可配置的 TouchLink
® 控制器将色彩艳丽的电容式触摸屏与强大的视音频系统控制和增强的安全性相结合。TLC Pro 521M 与 TLP Pro 520M TouchLink
Pro 触摸屏采用同样高灵敏度的电容式触摸屏，并且增加了一个安全、功能强大的控制处理器，这样其紧凑的外壳内就集成了一个功能丰富的触摸屏控制器。为了便于集成，以太网供电 (PoE) 功能可使触摸屏通过单根以太网电缆获取电源及进行通信。在既需要有直观的触摸屏，又需要具有 MediaLink Plus 控制器的灵活控制选项的教室、董事会议室或其它演示环境，TLC Pro 521M 无疑是理想之选。
特性
具有 800x480 的分辨率和 1600 万色彩的 5" 电容式触摸屏
内置控制处理器
1 个双向 RS-232 端口
2 个继电器，用于控制房间功能
1 个红外/串行端口，用于外部设备的单向控制
1 路数字输入
以太网供电功能允许控制器通过单根以太网电缆获取电源及进行通信，无需本地电源 - PoE 合路器单独销售
支持以太网可控设备：
使用 GC Plus 最多可控制 4 个设备
使用 GC Pro 最多可控制 8 个设备
可拆卸的螺丝锁定器
光感应器可根据环境照明的变化自动调整屏幕的亮度
可配置的红色和绿色状态指示灯
内置扬声器具有更佳的音频性能表现
节能特性： - 可调整的休眠计时器能让控制器进入休眠模式 - 运动探测器可将控制器激活
现代感的设计符合任何环境的审美需求
使用 Extron 控制系统软件进行完全的配制
经 JITC 认证 — 成功完成了政府机构和其它关键任务环境要求的互通和信息确认测试
示意图
1
2
面板图
| TLC Pro 521M | |||
| Display | |||
|---|---|---|---|
| Screen type | Active matrix TFT color display | ||
| Size | 5" (12.7 cm), measured diagonally | ||
| Resolution | 800x480 | ||
| Dot/pixel pitch | 187 dpi | ||
| Aspect ratio | Widescreen | ||
| Color depth | 24-bit, 16.7M colors | ||
| Transparency | 8 bit alpha channel | ||
| Brightness | 450 nits (cd/m 2 ) | ||
| Contrast | 250:1 | ||
| Backlight | LED | ||
| Viewing angle | ±70° horizontal, +50°/-70° vertical | ||
| Touch screen | Capacitive | ||
| Memory | |||
| SDRAM | 512 MB | ||
| Flash | 512 MB | ||
| Communication — Ethernet interface | |||
| Ethernet control/communications port | 1 female RJ-45 connector | ||
| Ethernet data rate | 10/100Base-T, half/full duplex with autodetect | ||
| Ethernet protocol | DHCP, DNS, HTTP, HTTPS, ICMP, SFTP, SSH, TCP/IP, UDP/IP | ||
| Default settings | Link speed and duplex level: autodetected IP address = 192.168.254.252 Subnet mask = 255.255.255.0 Default gateway = 0.0.0.0 DHCP = off DNS: 127.0.0.1 |
||
| Program control | Extron Global Configurator Plus and Professional Extron GUI Designer Toolbelt Extron Control |
||
| Communication — touchpanel | |||
| Motion sensor | On/off | ||
| Light sensor | On/off | ||
| Communication — Digital input | |||
| Quantity/type | 1 digital input | ||
| Connector | (1) 3.5 mm captive screw connector, 2 pole | ||
| Digital inputs | |||
| Input voltage range | 0 to 24 VDC, clamped at +30 VDC | ||
| Input impedance | 29k ohms | ||
| Upper threshold | 2.8VDC | ||
| Lower threshold | 2.0 VDC | ||
| Serial control | |||
| Quantity/type | 1 bidirectional RS-232 | ||
| Connector | (1) 3.5 mm captive screw connector, 3 pole | ||
| Baud rate and protocol | 300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits; no parity (default), even, odd, mark, or space parity |
||
| Pin configuration | Pin 1 = Tx; Pin 2 = Rx; Pin 3 = Gnd | ||
|
|||
| Relay control | |||
| Quantity/type | 2 normally open relays | ||
| Relay control connectors | (1) 3.5 mm captive screw connector,3 pole | ||
| Pin configuration | Pin1 = relay 1; Pin 2 = relay 2; Pin 3 = common | ||
| Relay control contact rating | 24 VDC, 1 A | ||
| IR/serial control | |||
| Quantity/type | 1 programmable: unidirectional RS-232 (±5 V), or TTL level (0 to 5 V) infrared (carrier or non-carrier) |
||
| Connector | (1) 3.5 mm captive screw connector, 2 pole | ||
| Baud rate and protocol (RS-232) | 300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits; no parity (default), even, odd, mark, or space parity |
||
| Pin configuration | Pin 1 = signal; Pin 2 = Gnd | ||
| IR output carrier frequency | 30 kHz to 300 kHz | ||
| Audio output | |||
| Speaker output | 1 mono, 86 dB SPL, 0.1 watt, 0.1 m, half space | ||
| Frequency response | 750 Hz to 20 kHz, ±5 dB | ||
| Playback format(s) | |||
| Container format | WAV (Microsoft RIFF) | ||
| Encoding | LPCM (uncompressed) | ||
| Bit depth | Unsigned 8-bit Signed 16-bit Signed 24-bit Signed 32-bit |
||
| Sampling rate | 2 kHz to 192 kHz | ||
| Audio channels | mono or stereo | ||
| General | |||
| Power supply | Not included | ||
| Power input requirements | 12 VDC or Power over Ethernet (PoE 802.3af, class 3) |
||
| Power consumption — Power injector (XTP PI 100) | |||
| Device | 6.0 watts | ||
| Device and power injector | 8.7 watts | ||
| Power consumption — PoE PSE | |||
| Device | 6.1 watts | ||
| Power consumption — 12 VDC power supply (PS 1210C) | |||
| Device | 4.3 watts | ||
| Device and power supply | 5.8 watts | ||
| Temperature/humidity | Storage: -22 to +158 °F (-30 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
| Cooling | Convection, vents on top and sides | ||
| Thermal dissipation — Power injector (XTP PI 100) | |||
| Device | 20.2 BTU/hr | ||
| Device and power injector | 29.6 BTU/hr | ||
| Thermal dissipation — PoE PSE | |||
| Device | 20.5 BTU/hr | ||
| Thermal dissipation — 12 VDC power supply (PS 1210C) | |||
| Device | 14.6 BTU/hr | ||
| Device and power supply | 19.7 BTU/hr | ||
| Mounting | |||
| Furniture or wall mount | With included hardware | ||
| Enclosure type | Plastic | ||
 |
|||
| Enclosure dimensions | |||
| Faceplate | 6.38" W x 4.61" H x 0.59" D (16.2 cm W x 11.7 cm H x1.5 cm D) |
||
| Enclosure | 5.43" W x 3.74" H x 1.64" D (13.8 cm W x 9.5 cm H x 4.2 cm D) |
||
| Product weight | 0.76 lbs (0.34 kg) | ||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
| Regulatory compliance | |||
| Safety | CE, c-UL, UL | ||
| EMI/EMC | CE, C-tick,FCC ClassA, ICES, VCCI | ||
| Environmental | Complies with theappropriate requirements of RoHS and WEEE. | ||
| Product warranty | 3 years parts and labor; touchpanel display and overlay components are covered for 1 year | ||
|
|||
|
|||
| (8.1-040716-D2) | |||
| 可选附件 | ||
|---|---|---|
| SMA-1 | 旋转式安装适配器 | |
| TLM 520 | Bezel Kits for TLP Pro 520M, TLC Pro 521M, and TLS 520M | |
| XTP PI 100 | 用于 XTP 和 Pro 系列控制系统的电源合路器 | |
首页