返回
爱思创电子(上海)有限公司_爱思创Extron中国
单声道功率放大器 - 40 W-MPA 401图片
单声道功率放大器 - 40 W-MPA 401
厂家报价:价格面议
生产状态:促销
爱思创Extron电子
爱思创Extron电子
爱思创电子(上海)有限公司(爱思创Extron中国)全球总部位于美国加州,是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、...
经销商 联系方式
爱思创Extron电子 4000.398766、 021-3760 1568
  • 产品
  • 参数
  • 附件配件
  • 下载

  Extron MPA 401 是一款 1/4 机架宽、对流冷却的单声道功率放大器,提供 40 W rms 的输出功率。它的 UL 2043 阻燃级设计符合 UL 关于天花板安装的相关要求。这款通过能源之星(ENERGY STAR®)认证的功率放大器采用了 Extron 独特、高效的高级 D 类功率放大器设计及专利的 CDRS™(D 类波纹抑制)技术,能够提供流畅、纯净的音频波形,大大提高了传统 D 类放大器的信号保真度。为了简化集成,它配有 3 路缓冲输入,可以分别连接 3路信号源而不会改变其性能表现。Extron 的这一独特、高效的设计产生的热量极少,使功率放大器能够对流冷却并在通风条件较差或无通风的环境中运行。

可选附件
MLA VC10 Plus 音量控制模块
FF 120T 带 1' x 2' 薄型外壳和 70/100V 变压器的全音域 Flat Field 扬声器
MBD 129 Through-Desk Mount Kit for 1/4 or 1/2 Rack Width, Two-Piece Enclosures
SF 228T 带 8" 低音扩音器和 70/100 V 变压器的双路 SoundField® 吊顶式天花板扬声器
VCM 200 D 音量和静音控制器 - Decorator 型墙面板
PMK 350 用于多个产品的薄型杆式安装套件
RSB 126 Basic Rack Shelf for 6" Deep Products
VC 50 音量控制墙面板

  Extron MPA 401 是一款 1/4 机架宽、对流冷却的单声道功率放大器,提供 40 W rms 的输出功率。它的 UL 2043 阻燃级设计符合 UL 关于天花板安装的相关要求。这款通过能源之星(ENERGY STAR®)认证的功率放大器采用了 Extron 独特、高效的高级 D 类功率放大器设计及专利的 CDRS™(D 类波纹抑制)技术,能够提供流畅、纯净的音频波形,大大提高了传统 D 类放大器的信号保真度。为了简化集成,它配有 3 路缓冲输入,可以分别连接 3路信号源而不会改变其性能表现。Extron 的这一独特、高效的设计产生的热量极少,使功率放大器能够对流冷却并在通风条件较差或无通风的环境中运行。

  特性

  Extron 专利的 CDRS™ – D 类波纹抑制技术

  前面板低音、高音和输入电平控制

  UL 2043 阻燃型

  平衡及非平衡缓冲音频输入

  无风扇设计

  自动削波限制器

  远程音量和静音控制端口

  机架固定式的 1U 高、1/4 机架宽的金属外壳

  扬声器输出:5 mm 螺丝锁定器

  为 70 V 扬声器系统提供 40 W rms 的输出

  通过能源之星®(ENERGY STAR®)认证

  快速启动及自动待机

  示意图

Product Diagram

  面板图

Panel Drawing

MPA 401 Series
Audio
Voltage gain
MPA 401-70V
RCA and TRS inputs 222x (47 dB)
Captive screw input 57x (35 dB)
MPA 401-100V
RCA and TRS inputs 317x (50 dB)
Captive screw input 81x (38 dB)
CMRR 75 dB (typical) @ 1 kHz
Bass adjustment ±10 dB @ 100 Hz
Treble adjustment ±10 dB @ 10 kHz
Audio input
Number/signal type 1 stereo/mono, balanced/unbalanced input
2 stereo/mono, unbalanced inputs
(The three inputs are individually buffered and mixed together. Stereo signals are actively summed into a mono signal.)
Connectors (1) 3.5 mm captive screw connector, 5 pole (main input)
(1) 3.5 mm mini audio jack (tip, ring, sleeve)
1 pair RCA
Impedance >10k ohms balanced/unbalanced, DC coupled
Maximum level +20 dBu (balanced, captive screw) or +4 dBV (unbalanced, RCA/TRS) at 1% THD+N
Input sensitivity
RCA and TRS inputs -10 dBV
Captive screw input +4 dBu if driven by one input
-2 dBu if both inputs are summed
Input signal detection threshold RCA and mini audio jacks: -44 dBv ±3 dB, unbalanced
Captive screw connector: -30 dBu ±3 dB, balanced
NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output
Number/signal type
MPA 401-70V 1 single channel (mono) 70 V
MPA 401-100V 1 single channel (mono)100 V
Connectors (1) 5 mm screw lock captive screw connector, 2 pole
Load impedance
MPA 401-70V 125 ohms minimum
MPA 401-100V 250 ohms minimum
Frequency response 80 Hz to 20 kHz, +1 dB/-3dB, 1watt
THD + Noise <0.2% @ 1 kHz at 3 dB below clipping
S/N >75 dB, 20 Hz to 20 kHz, unweighted
Damping factor >100
High pass filter 80 Hz, 12 dB/octave roll off
Amplifier type Class D
Output power
MPA 401-70V 40 watts (rms), 70 V, 1 kHz, 1% THD
MPA 401-100V 40 watts (rms), 100 V, 1 kHz, 1% THD
Communications — amplifier
Control port (1) 3.5 mm captive screw connector, 3 pole
Pin configuration Pin 1 = +10 VDC (50 mA max.), pin 2 = volume/mute control (variable voltage), pin 3 = GND
Volume control voltage range 0 V (mute) to 10 V (maximum volume)
General
Power supply External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 3 A, 36 watts
Power consumption
Typical (1/8 power), MPA 401-70V
Device 11.0 watts, 125 ohm load
Device and power supply 13.9 watts, 125 ohm load
Typical (1/8 power), MPA 401-100V
Device 12.3 watts, 250 ohm load
Device and power supply 15.3 watts, 250 ohm load
Quiescent, MPA 401-70V
Device 4.6 watts
Device and power supply 7.1 watts
Quiescent, MPA 401-100V
Device 5.9 watts
Device and power supply 8.4 watts
Standby <1 watt (triggered after 25 minutes [±5 minutes] with no signal)
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling Convection, no vents
Thermal dissipation
Standby
Device and power supply <1 watt (3 BTU/hr)
Idle, MPA 401-70V
Device 4.6 watts (16 BTU/hr)
Device and power supply 7.1 watts (24 BTU/hr)
Idle, MPA 401-100V
Device 5.9 watts (20 BTU/hr)
Device and power supply 8.4 watts (29 BTU/hr)
1/8 power, MPA 401-70V
Device 6.0 watts (20 BTU/hr)
Device and power supply 7.1 watts (24 BTU/hr)
1/8 power, MPA 401-100V
Device 7.3 watts (25 BTU/hr)
Device and power supply 10.3 watts (35 BTU/hr)
Mounting
Rack mount Yes, with optional 1U rack shelfor back of rack mounting kit
Furniture mount Yes, with optional under-desk mounting kit
Pole mount Yes, with optional pole mounting kit
Enclosure type Metal
Enclosure dimensions 1.7" H x 4.3" W x 6.0" D (1U high, quarter rack wide)
(4.3 cm H x 10.9 cm W x 15.2 cm D)
(Depth excludes connectors.)
Product weight 0.6 lbs (0.3 kg)
Shipping weight 3 lbs (2 kg)
Vibration ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release, excluding the power supply; meets UL 60065 and IEC 60065 for AV equipment safety.
MPA 401-70V CCC, CE, c-UL, UL
MPA 401-100V CE, c-UL, UL
EMI/EMC CE, C-tick, FCC Class B, ICES Class B, KCC, VCCI
Environmental Complies with the appropriate requirements of CEC, ENERGY STAR ® (ENERGY STAR® qualified amplifier), EU code of conduct, RoHS, WEEE
Warranty 3 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.
(8.1-073114-D17)
可选附件
MLA VC10 Plus 音量控制模块
FF 120T 带 1' x 2' 薄型外壳和 70/100V 变压器的全音域 Flat Field 扬声器
MBD 129 Through-Desk Mount Kit for 1/4 or 1/2 Rack Width, Two-Piece Enclosures
SF 228T 带 8" 低音扩音器和 70/100 V 变压器的双路 SoundField® 吊顶式天花板扬声器
VCM 200 D 音量和静音控制器 - Decorator 型墙面板
PMK 350 用于多个产品的薄型杆式安装套件
RSB 126 Basic Rack Shelf for 6" Deep Products
VC 50 音量控制墙面板
暂无相关下载!!!