返回
爱思创电子(上海)有限公司_爱思创Extron中国
22 瓦双通道集成式微型功放-MPA 122图片
22 瓦双通道集成式微型功放-MPA 122
厂家报价:价格面议
生产状态:促销
爱思创Extron电子
爱思创Extron电子
爱思创电子(上海)有限公司(爱思创Extron中国)全球总部位于美国加州,是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、...
经销商 联系方式
爱思创Extron电子 4000.398766、 021-3760 1568
  • 产品
  • 参数
  • 附件配件
  • 下载

  Extron MPA 122 集成式微型功放为教室和其它要求紧凑、简约的音频解决方案应用场所的扬声器系统提供立体声放大功能.

可选附件
MBB 100 Back of Rack Mounting Kit
MBU 123 用于 1/8、1/4 和 1/2 机架宽产品的薄型安装套件
PMK 100 用于 1/4 机架宽产品的杆式安装套件
PMK 300 用于 3 个 1/4 机架宽产品的多产品杆式安装套件
PPC 25 优先呼叫控制器
RSF 123 用于 3.5" 深产品的机架搁板套件
RSU 129 用于 9.5" 深产品的通用型机架搁板套件
VC 50 音量控制墙面板
安装故事
Jyske Bank Uses AV to Change the Way People Think About Banks Recently, Denmark's second largest independent bank underwent a major change. In just three months Jyske - pronounced Yeeska - Bank transformed all 125 of its branches - both physically, and from a business model perspective as well. Their goal: To make Jyske Bank Denmark's most customer-oriented bank by introducing "Jyske Bank Generation Two," a bold attempt to enhance customers' experience and encourage them to change the way they think about banking...

  Extron MPA 122 集成式微型功放为教室和其它要求紧凑、简约的音频解决方案应用场所的扬声器系统提供立体声放大功能.

  它是提升采用内置式视频 投影机扬声器基本教学系统的理想选择。MPA 122 在4 欧姆和8 欧姆阻抗下分别提供每通道 11 瓦和7 瓦的有效值(rms)功率。微型功放经过优化以 驱动四个8 欧姆天花板式扬声器,每通道两个并行连接。

  特性

  改良的D 等级放大设计

  每通道 11 瓦和7 瓦的有效值(rms)功率分别为4 欧姆和8 欧姆负荷

  THD + 噪音:0.1%、1 kHz 标称电平,用于1 瓦8 欧姆负荷

  前面板低音、高音和输入电平控制

  平衡与非平衡缓冲音频输入

  前面板限位开关防止放大器削波

  远程控制能力通过10k 电位计进行音量控制,通过触点闭合进行静音控制

  机架安装1U 高1/4 机架宽金属机箱

  提供外置型国际通用电源,产品编号为 70-380-01

  示意图

Product Diagram

  面板图

Panel Drawing

MPA 122
Audio
Frequency response 20 Hz to 20 kHz, ±1 dB @ 1 watt output
THD + Noise 0.1% @ 1 kHz at nominal level (1 watt, 8 ohm load)
S/N >74 dB @ 20 Hz to 20 kHz at maximum output (unweighted, with balanced input)
Stereo channel separation >55 dB @ 1 kHz, >45 dB @ 20 kHz
CMRR 80 dB @ 1 kHz, 70 dB @ 20 kHz
Bass adjustment ±10 dB @ 80 Hz (reference) to 1 kHz (2 dB tolerance)
Treble adjustment ±10 dB @ 10 kHz (reference) to 1 kHz (2 dB tolerance)
Audio input
Number/signal type 1 stereo, balanced/unbalanced input
2 stereo, unbalanced inputs
(The three inputs are individually buffered and mixed together.)
Connectors (1) 3.5 mm captive screw connector, 5 pole (main input)
(1) 3.5 mm mini audio jack (tip, ring, sleeve)
1 pair RCA
Impedance >18k ohms unbalanced, >24k ohms balanced, DC coupled
Nominal level +4 dBu (1.23 Vrms) balanced or -10 dBV (316 mVrms) unbalanced
Maximum level
Level pot. at 10 o'clock +6 dBV (unbalanced), +16 dBu (balanced) at 1% THD+N
Level pot. at 9 o'clock +17 dBV (unbalanced), +27 dBu (balanced) at 1% THD+N
Input level sensitivity -18 dBV from unbalanced input for maximum output (11 watts with a 4 ohm load and level set to maximum) before clipping
NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output
Number/signal type 1 stereo or 2 mono (2 channels total)
Connectors (1) 5 mm captive screw connector, 4 pole
Minimum load impedance 4 ohms
Amplifier type Improved Class D
Continuous power with a full load and 1% THD
At 4 ohms 11 watts (rms) per channel
At 8 ohms 7 watts (rms) per channel
Damping factor >30 (with a 4 ohm load)
Control/remote — amplifier
Control port (1) 3.5 mm captive screw connector, 3 pole
Pin configuration Pin 1 = +10 VDC, pin 2 = volume/mute (variable voltage), pin 3 = GND
Volume control voltage range 0 V (mute) to 10 V (maximum volume)
General
External power supply 100 VAC to 240 VAC, 50/60 Hz, external; to 12 VDC, 3 A (max.), regulated
Power input requirements 12 VDC, up to 3 A
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling Convection, vents on sides and top
Mounting
Rack mount Yes, with optional 1U, 9.5" deep rack shelf (RSU 129, #60-190-01, or RSB129, 60-604-01); 1U, 6" deep rack shelf (RSU126, #60-190-10, orRSB126, 60-604-10); or VersaTools® 1U, 3.5" deep rack shelf (RSF 123, #60-190-20; RSB 123, 60-604-20)
Furniture mount Yes, with optional VersaTools® MBU 123 mini under desk mounting kit, part #70-212-01
Pole mount Above-projector mountable with optional PMK 300 Multi-Product Projector Mounting Kit, part
#70-374-01
Enclosure type Metal
Enclosure dimensions 1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide)
(4.3 cm H x 10.9 cm W x 7.6 cm D)
(Depth excludes connectors.)
Product weight 0.6 lbs (0.3 kg)
Shipping weight 3 lbs (2 kg)
Vibration ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety CE, CUL, UL
UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release, excluding the power supply; meets UL 60950 and UL 60065 for safety.
EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI,
Warranty 3 years parts and labor
NOTE All nominal levels are at ±10%
NOTE Specifications are subject to change without notice.
(7.6-110508-D17)
可选附件
MBB 100 Back of Rack Mounting Kit
MBU 123 用于 1/8、1/4 和 1/2 机架宽产品的薄型安装套件
PMK 100 用于 1/4 机架宽产品的杆式安装套件
PMK 300 用于 3 个 1/4 机架宽产品的多产品杆式安装套件
PPC 25 优先呼叫控制器
RSF 123 用于 3.5" 深产品的机架搁板套件
RSU 129 用于 9.5" 深产品的通用型机架搁板套件
VC 50 音量控制墙面板
暂无相关下载!!!