返回
爱思创电子(上海)有限公司_爱思创Extron中国
MediaLink Plus 控制器-MLC Plus 200图片
MediaLink Plus 控制器-MLC Plus 200
厂家报价:价格面议
生产状态:在产
爱思创Extron电子
爱思创Extron电子
爱思创电子(上海)有限公司(爱思创Extron中国)全球总部位于美国加州,是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、...
经销商 联系方式
爱思创Extron电子 4000.398766、 021-3760 1568
  • 产品
  • 参数
  • 附件配件
  • 下载

  MLCPlus200 是一款易用的以太网控制器,设计用于处理常用的视音频功能,如显示设备的开/关、输入切换、音量调节和视音频设备的以太网控制等。其面板能够将安装螺丝隐藏起来,再加上圆角和坡口式设计,使控制器呈现出雅致、时尚的外观。MLC Plus 200采用 10 个可定制及可配置的按键,并具有一个用于 Extron MPA 系列和部分 XTRA™ 系列放大器的远程音量控制端口。以太网供电 (PoE) 功能允许 MLCPlus200 通过单根以太网电缆获取电源及进行通信。它安装在三单元接线盒中,并随附黑色和白色面板。

快速参考
MediaLink Plus 系列 (宣传册)
可选附件
MLM 200 AAP Mount Kit with AAP Opening for Three-Gang Button Panels
XTP PI 100 用于 XTP 和 Pro 系列控制系统的电源合路器
SMB 110 系列 用于美式单元产品的表面安装盒
EWB 系列 外置式墙面接线盒
UCM R308 带 8 个 AAP 开口的通用控制器安装面板
兼容的软件
Global Configurator Plus 和 Global Configurator Professional 用于视音频控制系统的强大配置软件
Extron Control 用于 TouchLink、eBUS、网络按键面板和 MediaLink 的控制应用程序
安装故事
Extron AV Connectivity Solutions Help Vivint Smart Home Arena Create a Multimedia Hit with Fans Vivint 球场是盐湖城顶级的体育赛事及娱乐场馆。这个可容纳 18,300 名观众的球场也是 NBA 犹他爵士队的主场。

  MLCPlus200 是一款易用的以太网控制器,设计用于处理常用的视音频功能,如显示设备的开/关、输入切换、音量调节和视音频设备的以太网控制等。其面板能够将安装螺丝隐藏起来,再加上圆角和坡口式设计,使控制器呈现出雅致、时尚的外观。MLC Plus 200采用 10 个可定制及可配置的按键,并具有一个用于 Extron MPA 系列和部分 XTRA™ 系列放大器的远程音量控制端口。以太网供电 (PoE) 功能允许 MLCPlus200 通过单根以太网电缆获取电源及进行通信。它安装在三单元接线盒中,并随附黑色和白色面板。

  特性

  通过标准以太网络管理、监视和控制视音频设备

  通过 Global Configurator Plus 或 Global Configurator Professional 进行完全的配置

  2 个双向 RS-232 端口

  2 个继电器,用于控制房间功能

  1 个红外端口,最多可连接两个发射器

  1 路数字输入

  用于 Extron MPA 系列和部分 XTRA™ 系列放大器的远程音量控制端口

  以太网供电功能允许控制器通过单根以太网电缆获取电源及进行通信,无需本地电源

  支持以太网可控设备

  使用 GC Plus 多达 4 个设备

  使用 GC Pro 多达 8 个设备

  双色、可现场贴标签的背光按键

  PoE injector or power supply sold separately — PS 1215 C (70-1174-01)

  示意图

Product Diagram

  面板图

Panel Drawing

MLC Plus 200
Memory
SDRAM 512 MB
Flash 512 MB
Software and control options
Software Extron Global Configurator Plus and Professional for Windows ®
Control options GlobalViewer ® ,Extron Control for Web, Extron Control for iPad ®
Ethernet control
Network interface controllers (NICs) 1
Connector 1 female RJ-45 connector
Data rate 10/100/1000Base-T, half/full duplex with autodetect
Protocols DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP
Default settings Link speed and duplex level = autodetected
IP address = 192.168.254.250
Subnet mask = 255.255.255.0
Gateway = 0.0.0.0
DHCP = off
DNS: 127.0.0.1
Serial control
Quantity/type 2 bidirectional RS-232
Connectors (2) 3.5 mm captive screw connectors, 3 pole
Baud rate and protocol 300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;
no parity (default), even, odd, mark, or space parity
NOTE These ports support software flow control. The default is no flow control.
Pin configurations
Serial, 3-pole captive screw Pin 1 = Tx, 2 = Rx, 3 = Gnd
Digital input control
Quantity/type 1 digital input
Connectors (1) 3.5 mm captive screw connector, 2 pole
Digital input
Input voltage range 0 to 24 VDC, clamped at +30 VDC
Input impedance 17.5k ohms
Programmable pullup 1k ohms to +5 VDC
Threshold low to high >2.8 VDC
Threshold high to low <2.0 VDC
Pin configurations 1 = digital input, 2 = Gnd
IR control
Quantity/type 1 TTL level (0 to 5 V) infrared (carrier and non-carrier) up to 300 kHz
Connectors (1) 3.5 mm captive screw connector, 2-pole
Pin configurations Pin 1 = signal, 2 = Gnd
IR output carrier frequency 30 kHz to 300 kHz
Relay control
Quantity/type 2 normally open relays
Relay control connectors (1) 3.5 mm captive screw connector, 3 pole
Relay control contact rating 24 VDC, 1 A
Volume control
Quantity/type 1 volume control (compatible with select Extron amplifiers)
Connectors (1) 3.5 mm captive screw connector, 3 pole
Pin configuration Pin 1 = ≤10 VDC reference voltage input, pin 2 = 0 to +10 VDC control voltage output, pin 3 = Gnd
Control voltage output range 0 to +10 VDC (±0.2 volts), adjustable
General
Power supply Not included
Power input requirements 12 VDC, 1 A, 12 watts, max.
Or power over Ethernet (PoE) (complies with PoE 802.3af, class 3)
Power consumption
Device 2.2 watts, 12 VDC
4.0 watts, 48 VDC (PoE)
Device and power supply 3.2 watts, 100-240 VAC, 50-60 Hz
Device and PoE injector 5.3 watts, 100-240 VAC, 50-60 Hz
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling Convection, no vents
Thermal dissipation
Device 7.4 BTU/hr (using 12 VDC)
13.6 BTU/hr (using 48 VDC, PoE)
Device and power supply 11.0 BTU/hr
Device and PoE injector 18.0 BTU/hr
Mounting
Rack mount No
Furniture or wall mount Yes, in a standard US 3-gang electrical junction box or mud ring
Enclosure type Plastic faceplate and high-impact plastic rear enclosure
Enclosure dimensions
Faceplate 4.5" H x 6.4" W x 0.3" D (11.4 cm H x 16.3 cm W x 0.8 cm D)
Device 2.7" H* x 5.2" W x 2.2" D (6.9 cm H* x 13.2 cm W x5.5 cm D)
(Depth excludes faceplate and buttons. Fits most3 gang US boxes or mud rings. Allow at least 2.4" [6.1 cm] depth in the wall or furniture.)
Product weight 1.0 lb (0.5 kg)
Shipping weight 2 lbs (1 kg)
Vibration ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety CE, c-UL, UL
EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI class A
Environmental Complies with the appropriate requirements of RoHS, WEEE
Accessibility Complies with the appropriate requirements of Section 508 of the Rehabilitation Act (29U.S.C.794d).
Product warranty 3 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.
(8.1-061215-D2)
可选附件
MLM 200 AAP Mount Kit with AAP Opening for Three-Gang Button Panels
XTP PI 100 用于 XTP 和 Pro 系列控制系统的电源合路器
SMB 110 系列 用于美式单元产品的表面安装盒
EWB 系列 外置式墙面接线盒
UCM R308 带 8 个 AAP 开口的通用控制器安装面板
暂无相关下载!!!