返回
爱思创电子(上海)有限公司_爱思创Extron中国
Universal MTP Twisted Pair Transmitter with Four Output DA for ISM 824-ISM MTP UT 4DA图片
Universal MTP Twisted Pair Transmitter with Four Output DA for ISM 824-ISM MTP UT 4DA
厂家报价:价格面议
生产状态:促销
爱思创Extron电子
爱思创Extron电子
爱思创电子(上海)有限公司(爱思创Extron中国)全球总部位于美国加州,是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、...
经销商 联系方式
爱思创Extron电子 4000.398766、 021-3760 1568
  • 产品
  • 参数
  • 附件配件
  • 下载

  The ISM MTP UT 4DA output board adds MTPTwisted Pair series transmission capability to the ISM824. It transmits video, audio, and control signals up to 600feet (185meters) on a single CAT5/5e/6 or Skew-free UTP cable. Also, as a universal transmitter, it supports all input signal types in mixed-signal routing applications.The ISMMTPUT4DAaccepts any video input signal type and outputs it as four identical twisted pair signals for connection to MTP Series twisted pair receivers, including MTPUR universal receivers.

  The ISM MTP UT 4DA output board adds MTPTwisted Pair series transmission capability to the ISM824. It transmits video, audio, and control signals up to 600feet (185meters) on a single CAT5/5e/6 or Skew-free UTP cable. Also, as a universal transmitter, it supports all input signal types in mixed-signal routing applications.The ISMMTPUT4DAaccepts any video input signal type and outputs it as four identical twisted pair signals for connection to MTP Series twisted pair receivers, including MTPUR universal receivers.

  The ISMMTPUT4DA features local RS-232 insertion ports, which eliminate the need for additional control system infrastructure to support remote displays, while overcoming the 100foot(30m) distance limitation for RS-232 signals. The integrated, four-output MTP distribution amplifier simplifies system design and eliminates the cost of an outboard DA in applications where multiple remote displays must receive the same input signal simultaneously.

  特性

  Transmits video, audio, and control signals 600feet (185meters) or more on a single CAT5/5e/6 or Extron Skew-Free™ UTP cable — Long distance transmission of video, audio, and control signals on low-cost UTP cable.

  Integrated 4-output distribution amplifier — Splits the input signal into four identical outputs, eliminating the need for and cost of an additional DA for simultaneous-display applications.

  Selectable pre-peaking on all outputs — Provides additional compensation for signal loss over long cable runs.

  Local RS-232 insertion ports for each pair of outputs — Replaces the separate control system infrastructure required to support remote displays.

  Local stereo audio output — Provides direct connection for local audio system and monitoring needs.

  Compatible with Extron MTPSeries products, including MTPUSeries Universal Receivers — A single output supports all input signal types in mixed-signal routing applications.

ISM 824
Video
Routing 8 x 2 matrix up to 8 x 8 matrix, depending on model and configuration
Gain Unity (outputs 1 and 2)
Bandwidth 450 MHz (-3 dB), fully loaded (main unit, outputs 1 and 2)
350 MHz (-3 dB) for wideband single/dual boards
Crosstalk -80 dB @ 1 MHz, -62 dB @ 10 MHz, -52 dB @ 30 MHz (outputs 1 and 2)
Switching speed 200 ns (max.) (outputs 1 and 2)
Video input — main unit
Number/signal type 8 RGBHV, RGBS, RGsB, RsGsBs, HDTV component video (interlaced or progressive), S-video, composite video
Connectors 8 x 5 female BNC
Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-pfor C of S-video
Minimum/maximum levels Analog: 0.5 V to 2.0 Vp-p with no offset at unity gain
Impedance 75 ohms
Horizontal frequency 15 kHz to 108 kHz
Vertical frequency 50 Hz to 120 Hz
Return loss <-30 dB @ 5 MHz
DC offset (max. allowable) 1.0 V
Sync — main unit
Input type RGBHV, RGBS, RGsB, RsGsBs, bi-level or tri-level for component video
Output type RGBHV, RGBS, RGsB, RsGsBs, bi-level or tri-level for component video (follows input) (outputs 1 and 2)
Standards NTSC 3.58, PAL
Input level 0.5 V to 5.0 Vp-p, 4.0 Vp-p normal
Output level AGC to TTL: 4.0 V to 5.0 Vp-p, unterminated
Input impedance 510 ohms
Output impedance 75 ohms
Max. input voltage 5.0 Vp-p
Max. propagation delay 15 ns, input channel to channel
Max. rise/fall time 4 ns
Polarity Positive or negative (follows input)
Video processing — ISM RGB
Digital sampling 24 bit, 8 bits per color; 13.5 MHz standard (video), 162 MHz standard (RGB)
Colors 16.78 million
Video output — ISM RGB scaled output
Number/signal type 1 scaled or pass-through RGBHV, RGBS, RGsB, HD YUV component video
Connectors 1 x 5 female BNC
Nominal level 1 Vp-p for Y of component video
0.7 Vp-p for RGBand for R-Y and B-Y of component video
Minimum/maximum levels 0.0 V to 0.7 Vp-p for RGB 0.0 V to 1.0 Vp-p for component video and G of RGsB
Impedance 75 ohms
Scaled resolution 640x480 1,2,3,4,5,6 , 800x600 1,2,3,4,5,6 , 852x480 1,2,3,4,5 , 1024x768 1,2,3,4 , 1024x852 1,2,3,4 , 1024x1024 1,2,3 , 1280x768 1,2,3,4 , 1280x800 1,2 , 1280x1024 1,2,3 , 1360x765 1,2,3 , 1360x768 1,2,3 , 1365x1024 1,2 , 1366x768 1,2,3 , 1400x1050 1,2 , 1440x900 2,7 , 1600x1200 1,2 , 1680x1050 2 , 1920x1200 2
HDTV: 480p 2,8 , 576p 1,5 , 720p 1,2,8 , 1080p 1,2,8 , 1080i 1,2,8 , 1080p Sharp
1 = at 50 Hz, 8 = at 59.94 Hz, 2 = at 60 Hz, 3 = at 72 Hz, 7 = at 75 Hz, 4 = at 96 Hz, 5 = at 100 Hz 6 = at 120 Hz
Sync — ISM RGB
Output type RGBHV, RGBS, RGsB
Bi-level or tri-level on Y, R-Y, B-Y channels (component video)
Standards NTSC 3.58, NTSC 4.43, PAL, SECAM
Output level TTL: 5.0 Vp-p, unterminated
Output impedance 75 ohms
Polarity Positive or negative (switch selectable)
Video processing — ISM VS
Digital sampling 24 bit, 8 bits per color: 13.5 MHz standard (video)
Colors 16.78 million
Video output — ISM VS scaled output
Number/signal type 1 scaled RGBHV, RGBS, RGsB, HD YUV component video
Connectors 1 x 5 female BNC
Nominal level 1 Vp-p for Y of component video
0.7 Vp-p for RGB andfor R-Y and B-Y of component video
Minimum/maximum levels 0.0 V to 1.0 Vp-p
Impedance 75 ohms
Scaled resolution 640x480 1,2 , 800x600 1,2 , 852x480 1,2 , 1024x768 1,2 , 1280x768 1,2 , 1280x1024 1,2 , 1360x765 1,2 , 1360x768 1,2, 1365x1024 1,2 , 1366x768 1,2 , 1400x1050 1,2
HDTV: 480p 2 , 576p 1 , 720p 1,2 , 1080p 1,2 , and 1080i 1,2
1
= at 50 Hz, 2 = at 60 Hz
Sync — ISM VS
Input type Pass-through RGBHV, RGBS, RGsB
Output type RGBHV, RGBS, RGsB
Bi-level on Y, R-Y, B-Y channels (component video)
Standards NTSC 3.58, NTSC 4.43, PAL, SECAM
Output level TTL: 5.0 Vp-p, unterminated
Output impedance 75 ohms
Max. input voltage 5.0 Vp-p
Max. propagation delay 30 ns (RGB pass-through)
Video output — wideband outputs:
• Main unit outputs 1 and 2 (pass-through)
• ISM 1WB single-output wideband board
• ISM 2WB dual-output wideband board
Number/signal type RGBHV, RGBS, RGsB, RsGsBs, HDTV component video (progressive/interlaced), S-video, composite video (follows input type)
Connectors
Wideband (main unit) 2 x 5 female BNC
ISM 1WB 1 x 5 female BNC
ISM 2WB 2 female 15-pin HD
Nominal level 1 Vp-p for Y or component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 for C of S-video
Minimum/maximum levels 0.0 V to 0.7 Vp-p (follows input)
Video processing — ISM DVI
Digital sampling 24 bit, 8 bits per color; 13.5 MHz standard (video), 162 MHz standard (RGB)
Colors 16.78 million
Video output — ISM DVI scaled output
Number/signal type 1 scaled DVI-D
Connector 1 female DVI-D
Nominal level 0.8 Vp-p
Impedance 75 ohms
Scaled resolution 640x480 4,5,6 , 800x600 4,5,6 , 852x480 4,5,6 , 1024x768 4,5,6 , 1024x852 4,5,6 , 1024x1024 4,5,6 , 1280x768 4,5,6 , 1280x800 4,5 , 1280x1024 4,5,6 , 1360x765 4,5,6 , 1365x768 4,5,6 , 1365x1024 4,5,6 , 1366x768 4,5,6 , 1400x1050 4,5 ,1440x900 5,7 ,1600x1200 4,5 , 1680x1050 5 , 1920x1200 5
HDTV: 480p 5,8 , 576p 4 , 720p 4,5,8 , 1080i 4,5,8 , 1080p 1,2,3,4,5,8 , 1080p Sharp
1 = 24 Hz, 8 = at 59.94 Hz, 2 = 25 Hz, 3 = 30Hz, 4 = 50Hz, 5 = 60Hz, 6 =72Hz, 7 =75Hz
Video processing — ISM HDSDI
Digital sampling 24 bit, 8 bits per color; 13.5 MHz standard (video), 162 MHz standard (RGB)
Colors 16.78 million
Video output — ISM HDSDI scaled outputs
Number/signal type 1 scaled HD-SDI (SMPTE 292M)
Connector 1 female BNC
Nominal level 0.8 Vp-p
Impedance 75 ohms
Scaled resolution 720p 1,2,3, 4,5,6 , 1080i 4,5,6 , 1080p 1,2,3
1 = 24 Hz, 2 = 25 Hz, 3 = 30 Hz, 4 = 50 Hz, 5 =59.94 Hz, 6 =60 Hz
Video — ISM MTP UT 4DA
Gain Unity
Video output — ISM MTP UT 4DA
Number/signal type 4 sets of proprietary analog signals
Connectors 4 female RJ-45
Maximum resolution 1920x1200
Video — ISM SC
Digital sampling 24 bit, 8 bits per color; 13.5 MHz standard (video), 162 MHz standard (RGB)
Colors 16.78 million
Horizontal filtering 4 levels
Flicker filtering 4 levels
Video output — ISM SC
Number/signal type 1 NTSC/PAL RGsB, component video (with bi-level sync), or S-video
1 NTSC/PAL composite video
Connectors 3 female BNC
1 female BNC
Nominal levels 1 Vp-p for Y or component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 for C of S-video
Minimum/maximum levels 0.0 V to 1.0 Vp-p (follows input)
Impedance 75 ohms
Sync — ISM SC
Output type RGsB, bi-level for component video
Standards NTSC 3.58, PAL
Output impedance 75 ohms
Output level NTSC or PAL standard levels
Audio — main unit
Gain Unbalanced output: -6 dB
Balanced output: 0 dB
Frequency response 20 Hz to 20 kHz, ±0.5 dB
THD + Noise 0.03% @ 1 kHz at nominal level, 0 dB gain
S/N >90 dB, at maximum rated output drive
Crosstalk <80 dB @ 1 kHz, fully loaded
Stereo channel separation >90 dB @ 1 kHz
CMRR >75 dB @ 20 Hz to 20 kHz
Audio — ISM MTP UT 4DA
Number/signal type 4 sets of proprietary signals
Connectors 4 female RJ-45 (shared with video)
Gain Unbalanced output: 0 dB (unity; balanced output: +6 dB
Frequency response 20 Hz to 20 kHz,±1 dB
THD + Noise 0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level
S/N >70 dB at maximum output (unweighted)
CMRR <-43 dB @ 20 Hz to 20 kHz
Audio input — main unit
Number/signal type 8 stereo, balanced/unbalanced
Connectors (8) 3.5 mm captive screw connectors, 5 pole
Impedance >10k ohms, balanced/unbalanced, DC coupled
Nominal level +4 dBu (1.23 V), -10 dBV (316 mV)
Maximum level +19.5 dBu, (balanced or unbalanced) at 1% THD+N
Input gain adjustment -18 dB to +24 dB
NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output — main unit
Number/signal type 2 (base model, upgradeable to 8) stereo, balanced/unbalanced
Connectors (2, upgradeable to 8) 3.5 mm captive screw connectors, 5 pole
Impedance 50 ohms unbalanced, 100 ohms balanced
Gain error ±0.5 dB channel to channel
Maximum level (Hi-Z) >+21 dBu balanced or >+15 dBu unbalanced at 1% THD+N
Maximum level (600 ohm) >+15 dBu, balanced or unbalanced, at stated 1% THD+N
Output volume range 0 to 64 (-64 dB to 0 dB) increments from steps 1 through 64
Control/remote — switcher
Serial host control port 1 rear panel RS-232 or RS-422, female 9-pin D connector
1 front panel RS-232 2.5 mm mini stereo jack
Baud rate and protocol 9600 baud, 8 data bits, 1 stop bit, no parity
Serial control pin configurations
9-pin D connector RS-232: 2 = TX, 3 = RX, 5 = GND
RS-422: 2 = TX-, 3 = RX-, 5 = GND, 7 = TX+, 8 = RX+
2.5 mm mini stereo jack RS-232: tip = TX, ring = RX, sleeve = GND
Ethernet control port 1 female RJ-45 connector
Ethernet data rate 10/100Base-T, half/full duplex with autodetect
Ethernet protocol ARP, ICMP (ping), IP, TCP, HTTP, Telnet
Default settings Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = off
Program control Extron control/configuration program for Windows ®
Extron Simple Instruction Set (SIS )
Microsoft ® Internet Explorer ® ver. 6 or higher, Netscape Navigator, Telnet
Control/remote — ISM MTP UT 4DA (pass-through)
Serial control 4 RS-232on (2) 3.5 mm captive screw connectors, 3 pole:
2 bidirectional(via outputs 1 and 3),2 unidirectional (via outputs 2 and 4)
Serial control pin configuration 1 = TX, 2 = RX, 3 = GND
Baud rates Up to 38400 bps at up to 600' (183 m) (Higher data rates and distances are possible. Performance will vary based on baud rate and cable length.)
Protocol Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
NOTE Protocol is mirrored between the transmitter board and the receiver.
General
Power 100 VAC to 240 VAC, 50-60 Hz, 75 watts, internal
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling Fan, left to right (as viewed from the front panel)
Mounting
Rack mount Yes
Enclosure type Metal
Enclosure dimensions 5.25" H x 17.5" W x 11.2" D (3U high, full rack wide)
(13.3 cm H x 44.4 cm W x 28.4 cm D)
(Depth excludes connectors and knobs. Width excludes rack ears.)
Product weight
Main unit 14 lbs (6.3 kg)
Optional boards 0.5 lbs (0.3 kg)
Shipping weight
Main unit 21 lbs (10 kg)
Optional boards 1 lb (1 kg)
Vibration ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety CE, c-UL, UL
EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
Warranty 3 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.
(7.6-092409-D9)
暂无相关附件!!!
暂无相关下载!!!