| 经销商 | 联系方式 |
|---|---|
| 爱思创Extron电子 | 4000.398766、 021-3760 1568 |
Extron PowerCage FOX AEX 104 四端口光纤音频提取器是一款设计用于 Extron PowerCage ® 1600 机箱的模块化板卡，可对光纤视音频系统中的音频信号进行独立的处理和路由。每一个端口均接收来自 FOX 系列发送器的信号、提取两声道音频信号以提供平衡或非平衡模拟立体声输出，并重新发送原始信号至 FOX 系列接收器。缓冲直通端口上的输出时钟恢复功能保持了信号的完整性，确保以原始的功率水平输出光纤信号。PowerCage FOX AEX 104 采用高速、全数字技术，可对视频、音频和控制信号进行完美像素的传输，并兼容 FOX 系列 HDMI、DVI Plus、DVI、VGA、VGA/YUV 以及视音频发送器和接收器。
Extron PowerCage FOX AEX 104 四端口光纤音频提取器是一款设计用于 Extron PowerCage
® 1600 机箱的模块化板卡，可对光纤视音频系统中的音频信号进行独立的处理和路由。每一个端口均接收来自 FOX 系列发送器的信号、提取两声道音频信号以提供平衡或非平衡模拟立体声输出，并重新发送原始信号至 FOX 系列接收器。缓冲直通端口上的输出时钟恢复功能保持了信号的完整性，确保以原始的功率水平输出光纤信号。PowerCage FOX AEX 104 采用高速、全数字技术，可对视频、音频和控制信号进行完美像素的传输，并兼容 FOX 系列 HDMI、DVI Plus、DVI、VGA、VGA/YUV 以及视音频发送器和接收器。
特性
为多达 4 路 FOX 系列光纤信号提供本地音频输出，并提取模拟立体声音频以用于独立的处理和路由
同时的音频提取端口
缓冲输入环通
平衡或非平衡模拟立体声音频输出
输出时钟恢复
设计用于 PowerCage 1600 机箱的模块化、可热插拔的板卡，产品编号 # 60-978-01
示意图
面板图
| PowerCage™ FOX AEX 104 | |||
|
|||
|
|||
|
|||
| Optical fiber interconnection between transmitter or fiber matrix switcher and receiver | |||
|---|---|---|---|
| Number/type | 2 fibers per extraction point | ||
| Connectors | 8 LC connectors | ||
| Operating distance | |||
| Singlemode | 30 km (18.75 miles) with singlemode (SM) cables | ||
| Multimode | 300 m (984') with 62.5 µm OM1 multimode (MM) cables 1 km (3280') with 50 µm OM2 multimode (MM) cables 2 km (6561') with 50 µm OM3/OM4 2000/4700 MHz bandwidth laser optimized multimode cables |
||
|
|||
| Nominal peak wavelength | 850 nm for MM, 1310 nm for SM | ||
| Data rate | 4.25 Gbps or 2.125 Gbps, selectable | ||
| Transmission power | |||
| Singlemode | -5 dBm, typical | ||
| Multimode | -5 dBm, typical | ||
| Maximum receiver sensitivity | |||
| Singlemode | -18 dBm, typical | ||
| Multimode | -12 dBm, typical | ||
| Optical loss budget | |||
| Singlemode | 13 dB, maximum | ||
| Multimode | 7 dB, maximum | ||
| Audio | |||
| Gain | Unbalanced output: -6 dB Balanced output: 0 dB |
||
| Frequency response | 20 Hz to 20 kHz, ±0.5 dB | ||
| THD + Noise | 0.10% @ 1 kHz at nominal level | ||
| S/N | >80 dB at maximum output (unweighted) | ||
| Audio bits per sample | 18 bits per channel, 2 channels (L, R) | ||
| Sampling rate | 48 kHz | ||
| Audio input — See the transmitter specifications | |||
| Audio output | |||
| Number/signal type | 4 stereo, balanced/unbalanced or 8 mono, balanced/unbalanced |
||
| Connectors | (4) 3.5 mm captive screw connectors, 5 pole | ||
| Impedance | 50 ohms unbalanced, 100 ohms balanced | ||
| Nominal level | +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) | ||
| Maximum level | >+11 dBu, balanced at 1% THD+N | ||
| Audio delay | 1.5 frames | ||
|
|||
| General | |||
| Power | Supplied by a PowerCage 1600 System Enclosure | ||
| Power consumption | |||
| System | Enclosure without boards: 12.4 watts | ||
| PowerCage FOX AEX board | 7.9 watts | ||
| Power input requirements for boards | 12 VDC, 1.0 A, supplied by the PowerCage enclosure | ||
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
| Cooling | Enclosure: fans, front to back Boards: convection, within the PowerCage enclosure |
||
| Thermal dissipation | 27.0 BTU/hr | ||
| Enclosure type | Metal | ||
| Enclosure dimensions | |||
| PowerCage enclosure | 5.25" H x 17.0" W x 12.25" D (3U high, full rack wide) 13.3 cm H x 43.2 cm W x 31.2 cm D (Depth excludes connectors on the optional boards. Width excludes rack ears.) |
||
| PowerCage FOX AEX board | Fits a double slot opening in a PowerCage enclosure | ||
| Product weight | |||
| PowerCage enclosure | 11.6 lbs (5.3 kg) | ||
| PowerCage FOX AEX board | 0.8 lbs (0.4 kg) | ||
| Shipping weight | |||
| PowerCage enclosure | 13 lbs (6 kg) | ||
| PowerCage FOX AEX board | 2 lbs (1 kg) | ||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
| Regulatory compliance | |||
| Safety | CE, c-UL, UL | ||
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI | ||
| Warranty | 3 years parts and labor | ||
|
|||
|
|||
| (8.1-070815-D5) | |||
首页