返回
爱思创电子(上海)有限公司_爱思创Extron中国
8 端口音频提取器-FOX AEX 108图片
8 端口音频提取器-FOX AEX 108
厂家报价:价格面议
生产状态:促销
爱思创Extron电子
爱思创Extron电子
爱思创电子(上海)有限公司(爱思创Extron中国)全球总部位于美国加州,是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、...
经销商 联系方式
爱思创Extron电子 4000.398766、 021-3760 1568
  • 产品
  • 参数
  • 附件配件
  • 下载

  Extron FOX AEX 108 是一款 8 端口光纤音频提取 器,用于对光纤视音频分配系统中的音频信号进 行独立的处理和路由。每一个端口均接收来自 FOX 系列发送器的信号、提取两声道音频信号以 提供平衡或非平衡模拟立体声输出,以及重新 发送原始信号至 FOX 系列接收器。缓冲直通端 口上的输出时钟恢复功能保持了信号的完整性, 确保以原始的功率水平输出信号。FOX AEX 108 采用高速、全数字技术,可通过光纤对视频、音 频和控制信号进行完美像素的传输。它兼容 FOX 系列 HDMI、DVI Plus、DVI、VGA、VGA/YUV 及 AV 发送器和接收器。

可选附件
RSU 129 用于 9.5" 深产品的通用型机架搁板套件
RSB 129 Basic Rack Shelf for 9.5" Deep Products
2LC OM4 MM P LC 至 LC 激光优化多模成品光纤 – 阻燃级
2LC SM P LC 至 LC 弯曲不敏感的单模成品光纤 – 阻燃级
OM4 MM P 弯曲不敏感的激光优化双工多模光纤 - 阻燃级
SM P 弯曲不敏感的双工单模光纤 – 阻燃级
快速 LC 光纤连接器 用于现场端接光纤的连接器

  Extron FOX AEX 108 是一款 8 端口光纤音频提取 器,用于对光纤视音频分配系统中的音频信号进 行独立的处理和路由。每一个端口均接收来自 FOX 系列发送器的信号、提取两声道音频信号以 提供平衡或非平衡模拟立体声输出,以及重新 发送原始信号至 FOX 系列接收器。缓冲直通端 口上的输出时钟恢复功能保持了信号的完整性, 确保以原始的功率水平输出信号。FOX AEX 108 采用高速、全数字技术,可通过光纤对视频、音 频和控制信号进行完美像素的传输。它兼容 FOX 系列 HDMI、DVI Plus、DVI、VGA、VGA/YUV 及 AV 发送器和接收器。

  特性

  8 个音频提取端口

  缓冲输入环通

  平衡或非平衡模拟音频输出

  可选择的输出时钟恢复

  兼容 Extron FOX 系列矩阵切换器,用于尺寸高达 1000x1000 及以上的信号分配系统

  兼容 Extron FOX 系列 HDMI、DVI Plus、DVI、VGA、VGA/YUV 及 AV 发送器和接收器

  可机架安装的 1U 高、半机架宽金属外壳

  内置式通用电源

  示意图

  1

  2

  Audio extraction for processing and routing before the FOX Matrix.

Product Diagram

  Audio extraction for processing and routing after the FOX Matrix.

Product Diagram

  面板图

Panel Drawing

FOX AEX 108
NOTE Analog audio signals are digitized in a fiber optic transmitter, sent through the fiber cable to the matrix switcher, then the FOXAEX108, and converted back to analog audio in the FOXAEX108 or the receiver.
NOTE These units are class 1 laser products. They meet the safety regulations of IEC-60825.
NOTE The FOXAEX108 is not compatible with the Extron FOX3GHD-SDI extender or the FOX3GDVC signal converter.
Optical fiber interconnection between transmitter or fiber matrix switcher and receiver
Number/type 2 fibers per extraction point
Connectors 16 LC connectors
Operating distance
Singlemode 30 km (18.75 miles) with singlemode (SM) cables
Multimode 300 m (984') with 62.5µm OM1 multimode (MM) cables
1 km (3280') with 50µm OM2 multimode (MM) cables
2 km (6561') with 50 µm OM3/OM4 2000/4700 MHz bandwidth laser optimized multimode cables
NOTE Operating distance is approximate.These are typical maximum distances that may vary depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
Nominal peak wavelength 850 nm for MM, 1310 nm for SM
Data rate 4.25 Gbps or 2.125 Gbps, selectable
Transmission power
Singlemode -5 dBm, typical
Multimode -5 dBm, typical
Maximum receiver sensitivity
Singlemode -18 dBm, typical
Multimode -12 dBm, typical
Optical loss budget
Singlemode 13 dB, maximum
Multimode 7 dB, maximum
Audio
Gain
Default Unbalanced output: –6 dB
Balanced output: 0 dB
Frequency response 20 Hz to 20 kHz, ±0.5 dB
THD + Noise 0.10% @ 1 kHz at nominal level
S/N >80 dB at maximum output (unweighted)
Audio bits per sample 18 bits per channel, 2 channels (L, R)
Sampling rate 48 kHz
Audio input — See the transmitter specifications
Audio output
Number/signal type 8 balanced/unbalanced stereo, 16 balanced or unbalanced mono
Connectors (8) 3.5 mm captive screw connectors, 5 pole
Impedance 50 ohms unbalanced, 100 ohms balanced
Nominal level +4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
Maximum level >+11 dBu, balanced at 1% THD+N
Audio delay 1.5 frames
NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
General
Power supply Internal
100 VAC to 240 VAC, 50-60 Hz, 20.0 watts
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling Convection, vents on top and side panels
Thermal dissipation 47.2 BTU/hr
Mounting
Rack mount Yes, with optional rack shelf
Furniture mount Yes, with optional under desk mounting kit
Enclosure type Metal
Enclosure dimensions 1.7" H x 8.7" W x 6.0" D (1U high, half rack wide)
(4.3 cm H x 22.1 cm W x 15.2 cm D)
(Depth excludes connectors.)
Product weight 2.3 lbs (1.0 kg)
Shipping weight 4lbs (3 kg)
Vibration ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety CE, c-UL, UL
EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
Warranty 3 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.
(8.1-070815-D6)
可选附件
RSU 129 用于 9.5" 深产品的通用型机架搁板套件
RSB 129 Basic Rack Shelf for 9.5" Deep Products
2LC OM4 MM P LC 至 LC 激光优化多模成品光纤 – 阻燃级
2LC SM P LC 至 LC 弯曲不敏感的单模成品光纤 – 阻燃级
OM4 MM P 弯曲不敏感的激光优化双工多模光纤 - 阻燃级
SM P 弯曲不敏感的双工单模光纤 – 阻燃级
快速 LC 光纤连接器 用于现场端接光纤的连接器
暂无相关下载!!!