返回
爱思创电子(上海)有限公司_爱思创Extron中国
4 端口光纤 RS-232 插入器-FOX RS 104图片
4 端口光纤 RS-232 插入器-FOX RS 104
厂家报价:价格面议
生产状态:促销
爱思创Extron电子
爱思创Extron电子
爱思创电子(上海)有限公司(爱思创Extron中国)全球总部位于美国加州,是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、...
经销商 联系方式
爱思创Extron电子 4000.398766、 021-3760 1568
  • 产品
  • 参数
  • 附件配件
  • 下载

  Extron FOX RS 104 是一款 4 端口光纤 RS-232 插入器,用于通过光纤将控制信号长距离传输至远端设备。每个端口都提供一个与 FOX 系列延长器的双向光纤连接,用于控制数据的插入和提取,从而保持视音频信号的连续直通链接。其设计注重可靠性和出色的高分辨率图像性能,采用 Extron 全数字技术可对 HDMI、DVI、计算机视频和标清视频进行完美的像素传输。缓冲光纤输出端口上的输出时钟恢复功能保证了信号的完整性,确保以原始的功率水平发送光纤信号。

可选附件
RFF 系列 基础型机架空白面板套件
RSU 126 用于 6" 深产品的通用型机架搁板套件
RSB 126 Basic Rack Shelf for 6" Deep Products
2LC OM4 MM P LC 至 LC 激光优化多模成品光纤 – 阻燃级
2LC SM P LC 至 LC 弯曲不敏感的单模成品光纤 – 阻燃级
OM4 MM P 弯曲不敏感的激光优化双工多模光纤 - 阻燃级
SM P 弯曲不敏感的双工单模光纤 – 阻燃级
快速 LC 光纤连接器 用于现场端接光纤的连接器

  Extron FOX RS 104 是一款 4 端口光纤 RS-232 插入器,用于通过光纤将控制信号长距离传输至远端设备。每个端口都提供一个与 FOX 系列延长器的双向光纤连接,用于控制数据的插入和提取,从而保持视音频信号的连续直通链接。其设计注重可靠性和出色的高分辨率图像性能,采用 Extron 全数字技术可对 HDMI、DVI、计算机视频和标清视频进行完美的像素传输。缓冲光纤输出端口上的输出时钟恢复功能保证了信号的完整性,确保以原始的功率水平发送光纤信号。

  特性

  将来自以太网端口的 RS-232 插入至一个或多个光纤输出

  缓冲光纤输出

  输出时钟恢复

  以太网监视和控制

  提供用于中等范围(最远 2 km)传输的 850 nm 多模型号和用于极长距离(最远可达 30 km)传输的 1310 nm 单模型号

  行业标准 LC 型连接器提供了可靠的物理连接以及精确的光纤线芯对准

  用于故障诊断和监视的实时状态 LED 指示灯

  兼容 Extron FOX 系列矩阵切换器,用于尺寸高达 1000x1000 及以上的信号分配系统

  兼容 Extron FOX 系列 HDMI、DVI Plus、DVI、VGA、VGA/YUV 以及视音频发送器和接收器

  示意图

  1

  2

  3

  RS-232 Insertion for Source and Display Devices

Product Diagram

  RS-232 Insertion before the FOX Matrix

Product Diagram

  RS-232 Insertion after the FOX Matrix

Product Diagram

  面板图

Panel Drawing

FOX RS 104
NOTE These units are class 1 laser products. They meet the safety regulations of IEC-60825.
NOTE The FOXRS 104 is not compatible with the Extron FOX 3G HD-SDI extender or the FOX 3G DVC signal converter.
Optical fiber interconnection between transmitter and receiver
Number/type 2 fibers per insertion point
Operating distance
Singlemode 30 km (18.75 miles) with singlemode (SM) cable with an SM unit
Multimode 300 m (985 ') with 62.5 µm OM1 multimode (MM) cablewith an MM unit
1 km (3280') with 50 µm OM2 MM cablewith an MM unit
2 km (6561') with 50 µm OM3/OM4 laser optimized MM cablewith an MM unit
NOTE Operating distance is approximate. These are typical maximum distances that may vary depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
Nominal peak wavelength 850 nm for FOX MM, 1310 nm for FOX SM
Data rate 4.25 Gbps or 2.125 Gbps, selectable
Transmission power -5 dBm, typical
Maximum receiver sensitivity
Singlemode -18 dBm, typical
Multimode -12 dBm, typical
Optical loss budget
Singlemode 13 dB, maximum
Multimode 7 dB, maximum
Ethernet control interface
Connectors 1 female RJ-45 connector
Data rate 10/100Base-T, half/full duplex with autodetect
Protocols ARP, ICMP (ping), IP, TCP, UDP, DHCP, HTTP, SMTP, Telnet
Default settings Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = off
Web server Up to 200 simultaneous sessions
7.25 MB nonvolatile user memory
Program control Extron Simple Instruction Set (SIS )
Microsoft® Internet Explorer®, Telnet
Global Viewer requirements Microsoft® Internet Explorer ver. 6 or higher
Serial control interface
Quantity/type 4 bidirectional RS-232, RS-422, RS-485 configurable serial
Connectors 8 SFP LCs
Baud rate and protocol 300 to 115200 baud
Default settings (adjustable): 9600 baud, 8 data bits, 1 stop bit, no parity
General
Power Internal
100 VAC to 240 VAC, 50-60 Hz, TBD watts
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling Convection, vents on side panels
Thermal dissipation
110 VAC, 60 Hz TBD BTU/hr
240 VAC, 50 Hz TBD BTU/hr
Mounting
Rack mount Yes, with optional 1U rack shelf
Furniture mount Under-furniture mountable with optional kit
Enclosure type Metal
Enclosure dimensions 1.7" H x 8.7" W x 6.0" D (1U high,half rack wide)
(4.3 cm H x 22.1 cm W x 15.3 cm D)
(Depth excludes connectors.)
Product weight TBD lbs ( TBD kg)
Shipping weight TBD lbs ( TBD kg)
Vibration ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety CE, c-UL, UL
EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
Environmental Complies with the appropriate requirements of RoHS, WEEE
Warranty 3 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.
(8.1-120914-D2)
可选附件
RFF 系列 基础型机架空白面板套件
RSU 126 用于 6" 深产品的通用型机架搁板套件
RSB 126 Basic Rack Shelf for 6" Deep Products
2LC OM4 MM P LC 至 LC 激光优化多模成品光纤 – 阻燃级
2LC SM P LC 至 LC 弯曲不敏感的单模成品光纤 – 阻燃级
OM4 MM P 弯曲不敏感的激光优化双工多模光纤 - 阻燃级
SM P 弯曲不敏感的双工单模光纤 – 阻燃级
快速 LC 光纤连接器 用于现场端接光纤的连接器
暂无相关下载!!!