

| 经销商 | 联系方式 |
|---|---|
| 爱思创Extron电子 | 4000.398766、 021-3760 1568 |
Extron Fiber Matrix 6400 输入/输出板 设计用于 FiberMatrix6400 模块化光纤矩阵切换器,可通过光纤进行完整的端对端数字视音频信号的传输和路由。它们支持高达 4.25Gbps 的数据速率,接受并可路由 HDMI、DVI、3G-SDI、高分辨率计算机视频和标清视频。输入/输出板可热插拔,能够在任何时候在现场进行添加,以用于简单快速的升级或扩展。
Extron Fiber Matrix 6400 输入/输出板 设计用于 FiberMatrix6400 模块化光纤矩阵切换器,可通过光纤进行完整的端对端数字视音频信号的传输和路由。它们支持高达 4.25Gbps 的数据速率,接受并可路由 HDMI、DVI、3G-SDI、高分辨率计算机视频和标清视频。输入/输出板可热插拔,能够在任何时候在现场进行添加,以用于简单快速的升级或扩展。
特性
用于 FiberMatrix6400 的多模和单模输入/输出板
兼容所有的 FOX 系列发送器和接收器
模块化、可现场升级和热插拔的设计
行业标准的 LC 型连接器提供了可靠的物理连接和精确的线芯对准
示意图
| Fiber Matrix 6400 | |||
|
|||
| Optical specifications | |||
|---|---|---|---|
| Number/type | 8 singlemode or 8 multimode fiber optic inputs and outputs per I/O board | ||
| Connectors | 8 LC connectors per I/O board | ||
| Operating distance | |||
| Singlemode | 30 km (18.75 miles) with singlemode (SM) cables with an Extronsinglemode Tx/Rx unit | ||
| Multimode | 300 m (985') with 62.5 µm multimode (MM) cables with an Extron multimode Tx/Rx unit 1 km (3280') with 50 µm multimode (MM) cables with an Extron multimode Tx/Rx unit 2 km (6561') with 50 µm 2000 MHz bandwidth laser multimode cable with an Extron multimode Tx/Rx unit |
||
|
|||
| Nominal peak wavelength | 850 nm for multimode (MM), 1310 nm for singlemode (SM) | ||
| Transmission power | |||
| Singlemode | -5 dBm, typical | ||
| Multimode | -5 dBm, typical | ||
| Maximum receiver sensitivity | |||
| Singlemode | -18 dBm, typical | ||
| Multimode | -12 dBm, typical | ||
| Optical loss budget | |||
| Singlemode | 13 dB, maximum | ||
| Multimode | 7 dB, maximum | ||
| Maximum channel data rate | 4.25 Gbps | ||
| Video | |||
| Routing | 8 x 8 up to 64 x 64 unidirectional (Tx) matrix or 4 x 4 up to 32 x 32 bidirectional (Tx/Rx) matrix |
||
| Gain | Unity | ||
| Video/audio input | |||
| Number/signal type | 8 to 64 fiber optic signals | ||
| Connectors | 8 LC connectors per I/O board | ||
| Video/audio output | |||
| Number/signal type | 8 to 64 fiber optic signals | ||
| Connectors | 8 LC connectors per I/O board | ||
| Control/remote — switcher | |||
| Serial control port | 1 bidirectional RS-232 or RS-422, female 9-pin D connector (rear panel) 1 bidirectional RS-232, 2.5 mm mini stereo jack (front panel ) |
||
| Baud rate and protocol | 9600 to 115200 baud, 9600 baud (default), 8 data bits, 1 stop bit, no parity | ||
| Serial control pin configurations | |||
| 9-pin female D connector | RS-232: 2 = Tx, 3 = Rx, 5 = GND RS-422: 2 = Tx-, 3 = Rx-, 5 = GND, 7 = Rx+, 8 = Tx+ |
||
| Mini stereo jack | RS-232: tip = Tx, ring = Rx, sleeve = GND | ||
| Ethernet control port | 1 female RJ-45 connector | ||
| Ethernet data rate | 10/100Base-T, half/full duplex with autodetect | ||
| Ethernet protocol | ARP, ICMP (ping), IP, TCP, UDP, DHCP, HTTP, SMTP, Telnet | ||
| Default settings | Link speed and duplex level = autodetected IP address = 192.168.254.254 Subnet mask = 255.255.0.0 Gateway = 0.0.0.0 DHCP = off |
||
| Web server | Up to 200 simultaneous sessions 3 MB nonvolatile user memory |
||
| Program control | Extron control/configuration program for Windows ® Extron Simple Instruction Set (SIS ™ ) Microsoft ® Internet Explorer ver. 6 or higher, Telnet |
||
| General | |||
| Power* | 2 (positive-negative), 100 VAC to 240 VAC, 50-60 Hz; internal Enclosure without boards: 35 watts at 115 VAC, 60 Hz Enclosure fully loaded with 8 boards: 115 watts at 115 VAC, 60 Hz Each module board: 10 watts at 115 VAC, 60 Hz * A redundant power supply is standard. |
||
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
| Cooling | Fan, right to left (as viewed from front panel) | ||
| Mounting | |||
| Rack mount | Yes | ||
| Enclosure type | Metal | ||
| Enclosure dimensions | 12.25" H x 17.0" W x 12.25" D (7U high, full rack wide) (31.1 cm H x 43.1 cm W x 31.1 cm D) (Depth excludes connectors and front handles. Width excludes rack ears.) |
||
| Product weight (fully loaded) | 35.8 lbs (16.2 kg) | ||
| Shipping weight | 43 lbs (20 kg) | ||
| DIM weight | |||
| USA/Canada | 146 lbs (63 kg) | ||
| International | 171 lbs (78 kg) | ||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
| Regulatory compliance | |||
| Safety | CE, c-UL, UL | ||
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI | ||
| MTBF | 30,000 hours | ||
| Warranty | 3 years parts and labor | ||
|
|||
|
|||
| (7.6-092209-D8) | |||