返回
爱思创电子（上海）有限公司_爱思创Extron中国
用于 Fiber Matrix 6400 的 8x8 HD-SDI 输入/输出板-Fiber Matrix 6400 3G HD-SDI 输入/输出板图片
用于 Fiber Matrix 6400 的 8x8 HD-SDI 输入/输出板-Fiber Matrix 6400 3G HD-SDI 输入/输出板
厂家报价：价格面议
生产状态：促销
爱思创Extron电子
爱思创Extron电子
详情
爱思创电子（上海）有限公司（爱思创Extron中国）全球总部位于美国加州，是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、...
经销商 联系方式
爱思创Extron电子 4000.398766、 021-3760 1568
  • 产品
  • 参数
  • 附件配件
  • 下载

　　Fiber Matrix 6400 3G HD-SDI 板作为 Fiber Matrix 6400 的选件提供，允许连接至本地的多速率 SDI 设备。此矩阵板提供了 8x8 配置，适用于切换和分配速率高达 2.97 Gbps 的多速率 SDI 信号，包括 SDI、HDSDI 和 3G-SDI。通过使用此矩阵板，可以将 Fiber Matrix 6400 配置为专用的多速率 SDI 矩阵切换器 (最多 64x64)，或者是多速率 SDI 与光纤矩阵切换的组合。Fiber Matrix 6400 3G HD-SDI 板符合 SMPTE 259M、292M、424M 和 ITU 数字视频标准。

　　Fiber Matrix 6400 3G HD-SDI 板作为 Fiber Matrix 6400 的选件提供，允许连接至本地的多速率 SDI 设备。此矩阵板提供了 8x8 配置，适用于切换和分配速率高达 2.97 Gbps 的多速率 SDI 信号，包括 SDI、HDSDI 和 3G-SDI。通过使用此矩阵板，可以将 Fiber Matrix 6400 配置为专用的多速率 SDI 矩阵切换器 (最多 64x64)，或者是多速率 SDI 与光纤矩阵切换的组合。Fiber Matrix 6400 3G HD-SDI 板符合 SMPTE 259M、292M、424M 和 ITU 数字视频标准。

　　特性

　　支持速率高达 2.97 Gbps 的多速率 SDI

　　支持热插拔

　　直通嵌入式音频、辅助 ID 和元数据信息以及SD/HD-SDTI 数字视频信号

　　输入均衡和缓冲输出的时钟调整

　　单独缓冲输入和输出

Fiber Matrix 6400
NOTE The Fiber Matrix 6400 fiber optic I/O boards are class 1 laser products. They meet the safety regulations of IEC-60825, FDA21, CFR1040.10, and FDA21 CFR1040.11.
Optical specifications
Number/type 8 singlemode or 8 multimode fiber optic inputs and outputs per I/O board
NOTE Only one fiber is required to transmit video, audio, and unidirectional data. A second fiber is required to transmit return data for bidirectional control/communication.
Connectors 8 LC connectors per I/O board
Operating distance
Singlemode 30 km (18.75 miles) with singlemode (SM) cables with an Extronsinglemode Tx/Rx unit
Multimode 300 m (985') with 62.5 µm multimode (MM) cables with an Extron multimode Tx/Rx unit
1 km (3280') with 50 µm multimode (MM) cables with an Extron multimode Tx/Rx unit
2 km (6561') with 50 µm 2000 MHz bandwidth laser multimode cable with an Extron multimode Tx/Rx unit
NOTE Operating distance is approximate. These are typical maximum distances that may vary depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
Nominal peak wavelength 850 nm for multimode (MM), 1310 nm for singlemode (SM)
Transmission power
Singlemode -5 dBm, typical
Multimode -5 dBm, typical
Maximum receiver sensitivity
Singlemode -18 dBm, typical
Multimode -12 dBm, typical
Optical loss budget
Singlemode 13 dB, maximum
Multimode 7 dB, maximum
Maximum channel data rate 4.25 Gbps
Video
Routing 8 x 8 up to 64 x 64 unidirectional (Tx) matrix or
4 x 4 up to 32 x 32 bidirectional (Tx/Rx) matrix
Gain Unity
Pixel data bit depth 8 bits per channel, 3 channels (R, G, B)
Video/audio input
Number/signal type 8 to 64 fiber optic signals
Connectors 8 LC connectors per I/O board
NOTE Input comes from an Extron fiber optic transmitter or fiber optic distribution amplifier.
Video/audio output
Number/signal type 8 to 64 fiber optic signals
Connectors 8 LC connectors per I/O board
NOTE Output connects to an Extron fiber optic receiver.
Digital video — 3G HD-SDI I/O board (multi-rate SDI)
Routing 8 x 8 matrix per I/O card, up to 64 x 64
Gain Unity
Maximum data rate 2.97 Gbps
Data types 8 or 10 bit
Operation standards SMPTE 292M, SMPTE 259M, SMPTE 424M, ITU-RBT.601, ITU-RBT.1120
Digital video input — 3G HD-SDI I/O board (multi-rate SDI)
Number/signal type 8 single link SDI, HD-SDI, or 3 Gbps HD-SDI
Connectors 8 female BNC
Nominal level 0.80 Vp-p ±10%
Impedance 75 ohms
Return loss <-15 dB @ 1 MHz to 1.5 GHz
Equalization Automatic
Input cable equalization distance
HD-SDI
Extron SHR, Belden 1694A cable 492' (150 m)
Extron HR, Belden 1505A cable 328' (100 m)
SDI
Extron SHR, Belden 1694A cable 984' (300 m)
Extron HR, Belden 1505A cable 656' (200 m)
NOTE The transmission distance varies depending on the signal resolution and on the type of cable, graphic card, and display used in the system.
Digital video output — 3G HD-SDI I/O board (multi-rate SDI)
Number/signal type 8 single link SDI, HD-SDI, or 3Gbps HD-SDI
Connectors 8 female BNC
Nominal level 0.80 Vp-p±10%
Return loss <-15 dB @ 1 HHz to 1.5 GHz
DC offset ±0.5 V with input at 0 offset
Re-clocking Automatic, or use available bypass mode for nonstandard rates
Jitter <0.2 VI
Rise/fall time (20-80%)
SDI 700 ps±100 ps
HD-SDI 250 ps±100 ps
Control/remote — switcher
Serial control port 1 bidirectional RS-232 or RS-422, female 9-pin D connector (rear panel)
1 bidirectional RS-232, 2.5 mm mini stereo jack (front panel )
Baud rate and protocol 9600 to 115200 baud, 9600 baud (default), 8 data bits, 1 stop bit, no parity
Serial control pin configurations
9-pin female D connector RS-232: 2 = Tx, 3 = Rx, 5 = GND
RS-422: 2 = Tx-, 3 = Rx-, 5 = GND, 7 = Rx+, 8 = Tx+
Mini stereo jack RS-232: tip = Tx, ring = Rx, sleeve = GND
Ethernet control port 1 female RJ-45 connector
Ethernet data rate 10/100Base-T, half/full duplex with autodetect
Ethernet protocol ARP, ICMP (ping), IP, TCP, UDP, DHCP, HTTP, SMTP, Telnet
Default settings Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = off
Web server Up to 200 simultaneous sessions
3 MB nonvolatile user memory
Program control Extron control/configuration program for Windows ®
Extron Simple Instruction Set (SIS ™ )
Microsoft ® Internet Explorer ver. 6 or higher, Telnet
General
Power* 2 (positive-negative), 100 VAC to 240 VAC, 50-60 Hz; internal
Enclosure without boards: 35 watts at 115 VAC, 60 Hz
Enclosure fully loaded with 8 boards: 115 watts at 115 VAC, 60 Hz
Each module board: 10 watts at 115 VAC, 60 Hz
* A redundant power supply is standard.
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling Fan, right to left (as viewed from front panel)
Mounting
Rack mount Yes
Enclosure type Metal
Enclosure dimensions 12.25" H x 17.0" W x 12.25" D (7U high, full rack wide)
(31.1 cm H x 43.1 cm W x 31.1 cm D)
(Depth excludes connectors and front handles. Width excludes rack ears.)
Product weight (fully loaded) 35.8 lbs (16.2 kg)
Shipping weight 43 lbs (20 kg)
DIM weight
USA/Canada 146 lbs (63 kg)
International 171 lbs (78 kg)
Vibration ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety CE, c-UL, UL
EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
Warranty 3 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.
(7.6-092209-D8)
暂无相关附件!!!
暂无相关下载!!!