返回
爱思创电子(上海)有限公司_爱思创Extron中国
带增益和均衡功能的 S-视频和音频线路驱动器 - Decorator 型墙面板-SVEQ 100 D图片
带增益和均衡功能的 S-视频和音频线路驱动器 - Decorator 型墙面板-SVEQ 100 D
厂家报价:价格面议
生产状态:促销
爱思创Extron电子
爱思创Extron电子
爱思创电子(上海)有限公司(爱思创Extron中国)全球总部位于美国加州,是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、...
经销商 联系方式
爱思创Extron电子 4000.398766、 021-3760 1568
  • 产品
  • 参数
  • 附件配件
  • 下载

  Extron SVEQ 系列是用于 S-视频和立体声音频的 1 路输入、1 路输出的线路驱动器。该系列产品具备可变增益和均衡控制功能,设计用于对长距离电缆传输中出现的信号衰减和高频损失进行补偿。增益调节功能用于补偿信号电平损失,峰值/均衡调节则用于补偿高频损失。SVEQ 系列也提供带平衡或非平衡立体声音频输出选择的有源音频缓冲。

  Extron SVEQ 系列是用于 S-视频和立体声音频的 1 路输入、1 路输出的线路驱动器。该系列产品具备可变增益和均衡控制功能,设计用于对长距离电缆传输中出现的信号衰减和高频损失进行补偿。增益调节功能用于补偿信号电平损失,峰值/均衡调节则用于补偿高频损失。SVEQ 系列也提供带平衡或非平衡立体声音频输出选择的有源音频缓冲。

  特性

  输出:2 个 4" 引线上的 BNC 插座和螺丝锁定器

  安装在 Decora® 型墙面板内

  随附黑色和白色墙面板以及边板

  可选择的双路单声道或立体声音频输出

  提供电源和信号存在指示的双色 LED 电源指示器

  随附底圈

  185 MHz(-3 dB)视频带宽

  兼容 NTSC、PAL 和 SECAM

  峰值/均衡和增益控制

  平衡和非平衡立体声音频输出

  随附外置式通用电源,产品编号为 #70-775-01

  示意图

Product Diagram

  面板图

Panel Drawing

SVEQ 100 Series
Video
Gain Y of S-video: -1 dB to +3 dB (x0.9 to x1.4), adjustable
C of S-video: 0 dB to +10 dB (x1 to x3), adjustable
Equalization 0 dB to +7 dB (x1 to x2) at 5 MHz, adjustable
Bandwidth (Y of S-video) 185 MHz (-3 dB)
Output cable driving distance Up to 1000' (300 m) with Extron MHR cable
Video input
Number/signal type 1 S-video
Connectors
SVEQ 100 2 female BNC
SVEQ 100 D, SVEQ 100 AAP, SVEQ 100 MAAP 1 female 4-pin mini DIN
Nominal level 1 Vp-p for Y of S-video
0.3 Vp-p for C of S-video
Minimum/maximum levels For Y: 0.4 to 2.0 Vp-p with no offset at unity gain
Impedance 75 ohms
Return loss <-25 dB @ 0 to 5 MHz
DC offset (max. allowable) 4.0 V
Input coupling AC
Video output
Number/signal type 1 S-video
Connectors
SVEQ 100 2 female BNC
SVEQ 100 D, SVEQ 100 AAP, SVEQ 100 MAAP 2female BNC attached via 4" pigtails
Nominal level 1 Vp-p for Y of S-video
0.3 Vp-p for C of S-video
Minimum/maximum levels 0.4 to 2.0 Vp-p (follows input)
Impedance 75 ohms
Return loss -30 dB @ 5 MHz
DC offset ±5 mV with no input signal
Floating: +0.1 to -0.6 V, depending on input signal content
Sync
Standards NTSC 3.58, NTSC 4.43, PAL, SECAM
Audio
Gain Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response 20 Hz to 20 kHz, ±0.5dB
THD + Noise 0.015% @ 1 kHz at nominal level
S/N >100 dB at maximum output (unweighted)
Stereo channel separation >80 dB @ 1 kHz
Output cable driving distance Up to 1000' (300 m) with Extron SHR cable
Audio input
Number/signal type 1 stereo unbalanced
Connectors 2 RCA female
Impedance 20k ohms unbalanced, DC coupled
Nominal level -10 dBV (316 mVrms)
Maximum level +8 dBu (2.5 V), unbalanced at 1% THD+N
NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output
Number/signal type
SVEQ 100 1 stereo, balanced/unbalanced
All other models 1 stereo or dual mono (switch-selectable), balanced/unbalanced
Connectors (1) 3.5 mm captive screw connector, 5 pole
Impedance 50 ohms unbalanced, 100 ohms balanced
Nominal level -10 dBV (316 mVrms), unbalanced; -2 dBu (632 mV), balanced output
Maximum level +9 dBV (2.8 V) unbalanced, +17 dBu (5.6 V) balanced at 1% THD+N with a 10k ohm load
General
External power supply 100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1A, regulated
Power input requirements 12 VDC, 0.2 A
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling Convection, no vents
Mounting
Rack mount
SVEQ 100 Yes, with optional 1U rack shelf
All other models No, but wall or furniture mountable
Furniture mount
SVEQ 100 Yes, with optional mounting kits
SVEQ 100 D Yes, directly, or with a standard electrical wall box or mud ring
All other models Yes, with optional AAP or MAAP mounting faceplates
Enclosure type
SVEQ 100 Metal
SVEQ 100 D Metal rear enclosure, plastic faceplate
SVEQ 100 AAP Metal faceplate, open at rear
SVEQ 100 MAAP Metal faceplate, metal rear enclosure
Enclosure dimensions
SVEQ 100 1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide)
(4.3 cm H x 11.0 cm W x 7.6 cm D)
(Depth excludes connectors.)
SVEQ 100 D
Faceplate 2.6" H x 1.3" W x 0.1" D
(6.6 cm H* x 3.3cm W x 0.3cm D)
(Fits the opening in a 1 gang Decora ® faceplate. *Height is 3.8" [9.5 cm], including mounting tabs.)
(Depth excludes connectors.)
Device 2.7" H x 1.8" W x 0.75" D
(6.9 cm H x 4.6 cm W x 1.9 cm D)
(Depth excludes connectors; height excludes mounting tabs.)
SVEQ 100 AAP
Faceplate 1.4" H x 3.5" W x 0.1" D (3.6 cm H x 7.1 cm W x 0.3 cm D) (double space high AAP plate)
Device 1.1" H x 2.8 " W x 1.2" D (2.8 cm H x 7.0 cm W x 3.0 cm D)
(Depth excludes connectors.)
SVEQ 100 MAAP
Faceplate 2.1" H x 2.2" W x 0.1" D (5.3 cm H x 5.7 cm W x 0.3 cm D) (three space MAAP plate)
Device 2.0" H x 1.4" W x 1.2" D (5 cm H x 3.6 cm W x 3.0 cm D)
(Depth excludes connectors.)
Product weight
SVEQ 100 0.7 lbs (0.3 kg)
All other models 0.2 lbs (0.1 kg)
Shipping weight
SVEQ 100 3 lbs (2 kg)
All other models 2 lbs (1 kg)
Vibration ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety CE, c-UL, UL
EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
Warranty 3 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.
(7.6-082109-D7)
暂无相关附件!!!
暂无相关下载!!!