爱思创Extron电子-产品详情-DAV音视工程网

经销商	联系方式
爱思创Extron电子	4000.398766、 021-3760 1568

　　Extron PowerCage FOX Rx AV 光纤发送器是一款设计用于 PowerCage ^® 1600 机箱的模块化板卡，可通过单根光纤长距离传输标清视频、音频和 RS-232 控制信号。其设计注重可靠性和出色的视频性能表现，使用 Extron 全数字技术对视频信号 (包括分量视频、S-视频和复合视频) 进行完美的像素对像素的传输。PowerCage FOX Rx AV 专门设计用于视音频系统，还包括许多便于集成的特性，如视频格式转换、图像和音频调整、菊花链功能以及实时的系统监控。

相兼容的发送器
FOX Tx AV	用于视频、音频和 RS-232 信号的光纤发送器

可选附件
MBD 129	Through-Desk Mount Kit for 1/4 or 1/2 Rack Width, Two-Piece Enclosures
MBU 125	用于 1/4 和 1/2 机架宽、两部件式产品的薄型安装套件
RSB 126	Basic Rack Shelf for 6" Deep Products
RSU 126	用于 6" 深产品的通用型机架搁板套件
RFF 系列	基础型机架空白面板套件
2LC OM4 MM P	LC 至 LC 激光优化多模成品光纤 – 阻燃级
2LC SM P	LC 至 LC 弯曲不敏感的单模成品光纤 – 阻燃级

相关产品
PowerCage 1600	用于光纤延长器的模块化电源机箱

　　Extron PowerCage FOX Rx AV 光纤发送器是一款设计用于 PowerCage ^® 1600 机箱的模块化板卡，可通过单根光纤长距离传输标清视频、音频和 RS-232 控制信号。其设计注重可靠性和出色的视频性能表现，使用 Extron 全数字技术对视频信号 (包括分量视频、S-视频和复合视频) 进行完美的像素对像素的传输。PowerCage FOX Rx AV 专门设计用于视音频系统，还包括许多便于集成的特性，如视频格式转换、图像和音频调整、菊花链功能以及实时的系统监控。

　　特性

　　接收来自 FOX 系列 AV 发送器的光纤信号，并提供标清视频、立体声音频和 RS-232 控制信号

　　接受分量视频、S-视频和复合视频信号

　　全数字技术提供了像素对像素的性能

　　设计用于 PowerCage 1600 机箱的模块化、可热插拔的板卡，产品编号 # 60-978-01

　　图像和音频调整

　　可选择输出格式的内置转码功能

　　提供用于中等范围传输的 850 nm 多模和用于极长距离（最远可达 30 km）传输的 1310 nm 单模型号

　　RS-232 控制

　　光纤链路丢失时的警报通知

　　菊花链功能

　　经 JITC 认证

　　示意图

　　PowerCage 1600

Product Diagram

　　面板图

Panel Drawing

PowerCage™ FOX Rx AV

NOTE	The PowerCage FOX Rx AV board is available in singlemode or multimode version.

NOTE	The PowerCage FOX Rx AV board is a class1 laser product. It meets the safety regulations of IEC-60825.

Optical fiber interconnection between transmitter and receiver

Number/type

1 singlemode or 1 multimode fiber optic input and output per board

NOTE	Only one fiber is required to transmit video, audio, and unidirectional data. A second fiber is required to return data for bidirectional control and communication.

Connectors

2 bidirectional LC connectors per board

Operating distance

Singlemode

30 km (18.75 miles) with singlemode (SM) cables with a SM board

Multimode

300 m (985') with 62.5 µm OM1 multimode (MM) cable and a MM board
1 km (3280') with 50 µm OM2 multimode (MM) cable and a MM board
2 km (6561') with 50 µm OM3/OM4 2000 MHz bandwidth laser optimizedMM cable and a MM board

NOTE	Operating distance is approximate. These are typical distances. The maximum distance may be greater than these typical numbers depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.

Nominal peak wavelength

850 nm for multimode (MM), 1310 nm for singlemode (SM)

Transmission power, singlemode or multimode

-5 dBm, typical

Maximum receiver sensitivity

Singlemode

-18 dBm, typical

Multimode

-12 dBm, typical

Optical loss budget

Singlemode

13 dB, maximum

Multimode

7 dB, maximum

Maximum channel data rate

2.125 Gbps

Video

NOTE	On PowerCage FOX Tx/Rx AV boards, the analog video input signal is digitized pixel for pixel in the transmitter, sent digitally through the fiber cable, and converted back to analog video in the receiver.

Gain

Unity

Standards

Input

NTSC 3.58, NTSC 4.43, PAL, SECAM, autodetected

Output

NTSC 3.58, PAL (follows vertical rate)

Decoder type

Adaptive 2D, digital comb filter

Video output

Number/signal type

1 component (Y, R-Y, B-Y) video, S-video, composite video

Connectors

1 x 3 female BNC or 1 female 4-pin mini DIN for S-video

Nominal levels

1.0 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for R-Y, B-Y of component video
0.3 Vp-p for C of S-video

Minimum/maximum levels

0.3 V to 1.5 Vp-p

Impedance

75 ohms

Return loss

>40 dB @ 5 MHz

DC offset

+350mV, maximum, with input at 0 offset

Video delay

1-2 frames

Audio

NOTE	On PowerCage FOX Tx/Rx AV boards, the analog audio signals are digitized in the transmitter, sent through the fiber cable, and converted back to analog audio in the receiver.

Gain

Range

Adjustable, -18 dB to +10 dB

Default

Unbalanced output: -6 dB; balanced output: 0 dB

Frequency response

20 Hz to 20 kHz, ±0.5 dB

THD + Noise

0.15% @ 1 kHz at nominal level

S/N

>80 dB at maximum output (unweighted)

CMRR

65 dB @ 20 Hz to 20 kHz

Audio bits per sample

18 bits per channel, 2 channels (L, R)

Sampling rate

48 kHz

Audio output

Number/signal type

1 stereo, balanced/unbalanced or
2 mono, balanced/unbalanced

Connectors

(1) 3.5 mm captive screw connector, 5 pole

Impedance

50 ohms unbalanced, 100 ohms balanced

Nominal level

+4 dBu (1.23 Vrms), -10 dBV (316 mVrms)

Maximum level (Hi-Z)

>+19 dBu, unbalanced at 1% THD+N

Maximum level (600 ohm)

>+15 dBm, unbalanced at 1% THD+N

Audio delay

1.5 frames

Control/remote

Serial control ports

Control

1 bidirectional RS-232, 3.5 mm captive screw connector, 5 pole (uses 3 poles; shared with the alarm port)

Pass-through

1 RS-232, 3.5 mm captive screw connector, 5 pole (uses 3 poles, "RS-232 Over Fiber")

Baud rate and protocol

Control

9600 baud, 8 data bits, 1 stop bit, no parity

Pass-through

9600 to 115,200 baud

Serial control pin configuration

1 = Tx, 2 = Rx, 3 = GND

Program control

Extron control/configuration program for Windows ^®
Extron Simple Instruction Set (SIS ^™ )

General

Power

Supplied by a PowerCage 1600 enclosure

Power consumption

5.57 watts

Power input requirements

12 VDC, 1.0 A, supplied by the PowerCage enclosure

Temperature/humidity

Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

Cooling

Enclosure: fans, front to back
Boards: convection, within the PowerCage enclosure

Thermal dissipation

27.6 BTU/hr

Dimensions

Each fits a double slot opening in a PowerCage enclosure.

Product weight

1.1 lbs (0.5 kg)

Shipping weight

2 lbs (1 kg)

Vibration

ISTA 1A in carton (International Safe Transit Association)

Regulatory compliance

Safety

CE, c-UL, UL

EMI/EMC

CE, C-tick, FCC Class A, ICES, VCCI

Environmental

Complies with the appropriate requirements of RoHS, WEEE.

Product warranty

3 years parts and labor

NOTE	All nominal levels are at ±10%.

NOTE	Specifications are subject to change without notice.

(8.1-112114-D2)

可选附件
MBD 129	Through-Desk Mount Kit for 1/4 or 1/2 Rack Width, Two-Piece Enclosures
MBU 125	用于 1/4 和 1/2 机架宽、两部件式产品的薄型安装套件
RSB 126	Basic Rack Shelf for 6" Deep Products
RSU 126	用于 6" 深产品的通用型机架搁板套件
RFF 系列	基础型机架空白面板套件
2LC OM4 MM P	LC 至 LC 激光优化多模成品光纤 – 阻燃级
2LC SM P	LC 至 LC 弯曲不敏感的单模成品光纤 – 阻燃级

暂无相关下载!!!