| 经销商 | 联系方式 |
|---|---|
| 爱思创Extron电子 | 4000.398766、 021-3760 1568 |
Extron Extender 系列是 1 路输入、1 路缓冲输出的线路驱动器，可通过高品质 电缆（如：Extron MHR-5 微型高分辨率电缆）将高分辨率 VGA 视频和音频信 号传送至最远 250'（75 m）的距离。
| 安装故事 |
|---|
| The Mater Dei Paradigm Mater Dei High School is one of the largest Catholic high schools in the United States. When the school wanted to integrate complete, turnkey AV systems into all of their classrooms... |
Extron Extender 系列是 1 路输入、1 路缓冲输出的线路驱动器，可通过高品质 电缆（如：Extron MHR-5 微型高分辨率电缆）将高分辨率 VGA 视频和音频信 号传送至最远 250'（75 m）的距离。
特性
300 MHz（-3 dB）RGB 视频带宽
兼容 VGA-QXGA 分辨率
3 档位峰值/增益控制，有助于在长距离电缆传输中保持视频信号的完整性
有源 PC 音频接口将非平衡音频转换为平衡线路电平音频
将低电平同步信号恢复到 TTL 电平
提供电源和信号存在指示的双色 LED 电源指示器
随附外置式通用电源，产品编号 #70-775-01
示意图
面板图
| Extender Series | |||
| Video | |||
|---|---|---|---|
| Gain | 0 dB, 0.6 dB, 1.2 dB, selectable (when input is 0.7 Vp-p, output is 0.7 V, 0.75 V, 0.8 Vp-p) | ||
| Bandwidth | 300 MHz (-3 dB) | ||
|
|||
| Video input | |||
| Number/signal type | 1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video | ||
| Connectors | 1 female 15-pin HD | ||
| Nominal level | 1.0 Vp-p for Y of component video 0.7 Vp-p for RGB and for R-Y and B-Y of component video |
||
| Minimum/maximum levels | Analog: 0.3 V to 1.5 Vp-p with no offset at unity gain | ||
| Impedance | 75 ohms | ||
| Horizontal frequency | 15 kHz to 135 kHz | ||
| Vertical frequency | 30 Hz to 170 Hz | ||
| Input coupling | DC | ||
| ID bits | Pins 4 and 11: terminated to ground Pins 12 and 15: floating |
||
| Video output | |||
| Number/signal type | 1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video | ||
| Connectors | |||
| Extender AAP EX | 5 female BNC onpigtails RGB: 20" (50.8 cm) pigtails HV: 18" (45.7 cm) pigtails |
||
| All other models | 5 female BNC on 3" (7.6 cm) pigtails | ||
| Nominal level | 1.0 Vp-p for Y of component video 0.7 Vp-p for RGB and for R-Y and B-Y of component video |
||
| Minimum/maximum levels | Analog: 0.3 V to 1.5 Vp-p with no offset at unity gain | ||
| Impedance | 75 ohms | ||
| DC offset | ±5 mV with input at 0 offset | ||
| Return loss | <-35 dB @ 5 MHz | ||
| Sync | |||
| Input type | RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level component video sync | ||
| Output type | RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level component video sync | ||
| Input level | 2.0 V to 5.0 Vp-p | ||
| Output level | TTL: 5 Vp-p, unterminated | ||
| Input impedance | 510 ohms | ||
| Output impedance | 75 ohms | ||
| Max. propagation delay | 18.8 ns | ||
| Max. rise/fall time | 4 ns | ||
| Polarity | Positive or negative (follows input) | ||
| Audio | |||
| Gain | Unbalanced output: 0 dB; balanced output: +6 dB | ||
| Frequency response | 20 Hz to 20 kHz, ±0.5 dB | ||
| THD + Noise | 0.025% @ 1 kHz, 0.020% @ 20 kHz at nominal level | ||
| S/N | >90 dB at rated maximum output | ||
| Stereo channel separation | >75 dB @ 20 Hz to 20 kHz | ||
| Audio input | |||
| Number/signal type | 1 stereo, unbalanced | ||
| Connectors | (1) 3.5 mm mini stereo jack | ||
| Impedance | >10k ohms unbalanced, DC coupled | ||
| Nominal level | -10 dBV (316 mVrms) | ||
| Maximum level | +6 dBV, (unbalanced) at 1% THD+N | ||
| Audio output | |||
| Number/signal type | 1 stereo, balanced/unbalanced | ||
| Connectors | (1) 3.5 mm direct insertion captive screw connector, 5 pole | ||
| Impedance | 50 ohms unbalanced, 100 ohms balanced | ||
| Nominal level | -2 dBu, balanced; -10 dBV unbalanced | ||
| Maximum level (Hi-Z) | +14 dBu, balanced, at 1% THD+N | ||
| Maximum level (600 ohm) | +6 dBm, balanced, at 1% THD+N | ||
|
|||
| General | |||
| External power supply | 100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A, regulated | ||
| Power input requirements | 12 VDC, 0.2 A | ||
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
| Cooling | Convection, no vents | ||
| Mounting | |||
| Floor box mount | |||
| Extender AKM UK AAP | Ackerman UK floor box mountable | ||
| Extender AKM MAAP | Ackerman floor box mountable in either a GB2 or a GB3 mounting space | ||
| Furniture mount | |||
| Extender AAP EX | Mountable in an optional HSA 800 Series or HSA 400 Series Hideaway Surface Access Enclosure, which can be mounted in furniture | ||
| Extender WM AUS | Wall or furniture mountable in a standard Australian electrical wall box | ||
| Extender AAP | Wall or furniture mountable with optional AAP mounting faceplates | ||
| All other models | Wall or furniture mountable in a standard US electrical wall box | ||
| Enclosure type | Metal (Extender D has a metal faceplate and a plastic decorator-style wall plate.) | ||
| Enclosure dimensions | |||
| Extender AAP, Extender AAP EX | |||
| Faceplate | 1.4" H x 3.5" W x 0.1" D (3.6 cm H x 8.9 cm W x 0.3 cm D) (double space high AAP plate) |
||
| Buffer | 1.1" H* x 2.75" W x 1.2" D (2.8 cm H* x 7.0 cm W x 3.0 cm D) (*Height excludes BNC connectors and cables.) |
||
| Extender WM | |||
| Faceplate | 4.5" H x 2.8" W x 0.1" D (11.4 cm H x 7.1 cm W x 0.3 cm D) (1 gang) |
||
| Buffer | 2.7" H x 1.8" W x 0.75" D* (6.9 cm H x 4.6 cm W x 1.9 cm D*) (*Depth excludes BNC connectors and cables.) |
||
| Extender WM AUS | |||
| Faceplate | 3.0" H x 4.7" W x 0.1" D (7.6 cm H x 11.8 cm W x 0.3 cm D) | ||
| Buffer | 2.75" H* x 1.1" W x 1.2" D (7.0 cm H* x 2.8 cm W x 3.0 cm D) (*Height excludes BNC connectors and cables.) |
||
| Extender WM AAP | |||
| Faceplate | 4.5" H x 6.4" W x 0.1" D (11.4 cm H x 16.3 cm W x 0.3 cm D) (3 gang) |
||
| Buffer | 2.7" H x 1.8" W x 0.75" D* (6.9 cm H x 4.6 cm W x 1.9 cm D*) (*Depth excludes BNC connectors and cables.) |
||
| Extender MK | |||
| Faceplate | 3.4" H x 5.7" W (8.6 cm H x 14.4 cm W) (UK knockout box size) |
||
| Buffer | 1.1" H* x 2.75" W x 1.2" D (2.8 cm H* x 7.0 cm W x 3.0 cm D) (*Height excludes BNC connectors and cables.) |
||
| Extender AKM UK AAP | |||
| Faceplate | 3.0" H x 8.1" W x 0.6" D (7.6 cm H x 20.6 cm W x 1.5 cm D) |
||
| Buffer | 1.1" H* x 2.75" W x 1.2" D (2.8 cm H* x 7.0 cm W x 3.0 cm D) (*Height excludes BNC connectors and cables.) |
||
| Extender AKM MAAP | |||
| Faceplate | 1.67" H x 6.12" to 7.85" W* x 3.0" D (4.1 cm H x 15.5 cm to 19.9 cm W* x 7.6 cm D) *Width is adjustable. |
||
| Buffer | 1.8" H x 4.4" W x 3.0" D (4.6 cm H x 11.2 cm W x 7.6 cm D) |
||
| Extender D | |||
| Faceplate | 2.6" H* x 1.3" W x 0.1" D (6.6 cm H* x 3.3 cm W x 0.3 cm D) (Fits the opening in a 1 gang decorator-style faceplate. *Height is 3.8" [9.7 cm] including mounting tabs.) |
||
| Buffer | 2.7" H x 1.8" W x 0.75" D* (6.9 cm H x 4.6 cm W x 1.9 cm D*) (*Depth excludes BNC connectors and cables.) |
||
| Product weight | |||
| Extender AAP, Extender AAP EX, Extender WM | 0.2 lbs (0.1 kg) | ||
| Extender WM AUS | 0.3 lbs (0.1 kg) | ||
| Extender WM AAP | 0.4 lbs (0.2 kg) | ||
| Extender MK | 0.5 lbs (0.3 kg) | ||
| Extender AKM UK AAP | 0.6 lbs (0.3 kg) | ||
| Extender AKM MAAP | 1.2 lbs (0.5 kg) | ||
| Extender D | 0.2 lbs (0.1 kg) | ||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
| Regulatory compliance | |||
| Safety | CE, c-UL, UL | ||
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI | ||
| Warranty | 3 years parts and labor | ||
|
|||
|
|||
| (4003-D19-042017) | |||
首页