返回
爱思创电子(上海)有限公司_爱思创Extron中国
用于 RGBHV、音频和 RS-232 信号的光纤接收器-FOX 500 Rx图片
用于 RGBHV、音频和 RS-232 信号的光纤接收器-FOX 500 Rx
厂家报价:价格面议
生产状态:促销
爱思创Extron电子
爱思创Extron电子
爱思创电子(上海)有限公司(爱思创Extron中国)全球总部位于美国加州,是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、...
经销商 联系方式
爱思创Extron电子 4000.398766、 021-3760 1568
  • 产品
  • 参数
  • 附件配件
  • 下载

  Extron FOX 500 Rx 光纤接收器可通过单根光纤长距离传输 RGBHV 视频、音频以及 RS-232 控制信号。其设计注重可靠性和出色的高分辨率图像性能,使用 Extron 全数字技术对分辨率高达UXGA 1600x1200 的计算机视频图像进行完美的像素对像素的传输。专为视音频系统而设计,FOX 500 Rx 包括了许多便于集成的特性,如图像调整和校准、双 RGB 和音频双输出、RS-232 控制以及实时的系统监控。

  Extron FOX 500 Rx 光纤接收器可通过单根光纤长距离传输 RGBHV 视频、音频以及 RS-232 控制信号。其设计注重可靠性和出色的高分辨率图像性能,使用 Extron 全数字技术对分辨率高达UXGA 1600x1200 的计算机视频图像进行完美的像素对像素的传输。专为视音频系统而设计,FOX 500 Rx 包括了许多便于集成的特性,如图像调整和校准、双 RGB 和音频双输出、RS-232 控制以及实时的系统监控。

  特性

  接收来自 FOX 系列发送器的光纤信号,并提供 RGBHV、立体声音频和 RS-232 控制信号

  全数字技术提供了像素对像素的性能,支持分辨率高达 1600X1200 的信号

  提供用于中等范围传输的 850 nm 多模型号和用于极长距离(最远可达 30 km)传输的 1310 nm 单模型号

  用于故障诊断和监视的实时状态 LED 指示灯

  光纤链路丢失时的警报通知

  自动输入存储

  行业标准的 LC 连接器提供了可靠的物理连接和精准的光纤纤芯对准

  双 RGB 和立体声音频输出

  30 个用户存储预设

  有源 PC 音频与平衡音频连接

  RS-232 控制

  用于校准和设置的内部测试图像

  Auto-Image™ 可自动优化输出

  兼容 Extron FOX 矩阵切换器,用于尺寸高达 1000x1000 及以上的信号分配系统

  兼容 Extron FOX 系列 HDMI、DVI Plus、DVI、VGA 和 VGA/YUV 发送器

  可机架安装的 1U 高,半机架宽金属外壳

  内置式通用电源

  示意图

Product Diagram

  面板图

Panel Drawing

FOX 500 Rx
NOTE The FOX 500 Rx is a receiver with one or two fiber optic cables linking it to a transmitter.
NOTE The analog RGB input signal is digitized pixel for pixel in the transmitter, sent digitally through the fiber cable, and converted back to analog RGB in the receiver.
NOTE The analog audio signals are digitized in the transmitter, sent through the fiber cable, and converted back to analog audio in the receiver.
NOTE This receiver is a class 1 laser product. It meets the safety regulations of IEC-60825.
Optical fiber interconnection between transmitter and receiver
Number/type 1 or 2 fiber optic
NOTE Only one fiber is required to transmit video, audio, and unidirectional data. A second fiber is required to transmit return data for bidirectional control and communication.
Connectors 2 LC connectors
Operating distance
Singlemode 30 km (18.75 miles) with singlemode (SM) cables with an SM unit
Multimode 300 m (985') with 62.5µm OM1 multimode (MM) cableswith an MM unit
1 km (3280') with 50µm OM2 multimode (MM) cables with an MM unit
2 km (6561') with 50 µmOM3/OM4 laser optimized multimode cable with an MM unit
NOTE Operating distance is approximate.These are typical maximum distances thatmayvary depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
Nominal peak wavelength 850 nm for MM units, 1310 nm for SM units
Data rate 4.25 Gbps
Transmission power -5 dBm, typical
Maximum receiver sensitivity
Singlemode -18 dBm, typical
Multimode -12 dBm, typical
Optical loss budget
Singlemode 13 dB, maximum
Multimode 7 dB, maximum
Video
Number/signal type VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs, or HD component
Gain Unity
Pixel data bit depth 8 bits per channel, 3 channels (R, G, B)
Maximum resolution 1600x1200 or 1080p@ 60 Hz, digitized pixel for pixel; higher resolutions up to 2048x1120, undersampled
Video output
Number/signal type 2 VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs (follows input or can be set by user)
Connectors 1 x 6 female BNC and (1) female 15-pin HD
Nominal level 0.7 Vp-p for RGB
Minimum/maximum levels 0.3 V to 1.5 Vp-p
Impedance 75 ohms
Return loss -40 dB @ 5 MHz
DC offset ±5 mV with input at 0 offset
Video delay 1-2 frames
Sync
Output type RGBHV, RGBS, RGsB, RsGsBs (follows input or can be set by user), or component video
Output level TTL: 5.0 Vp-p, unterminated, on HV, for RGBHV, RGBS
0.3 Vp-p for component video (bi-level sync, unterminated) or for Gs (SOG), terminated
0.6 Vp-p for component video (tri-level sync)
Output impedance 75 ohms
Polarity Positive or negative (follows input or can be set by user)
Audio
Gain
Range Adjustable, -18 dB to +10 dB
Default
Captive screw connector Unbalanced output: -6 dB; balanced output: 0 dB
Mini stereo jack Unbalanced output: 0 dB
Frequency response 20 Hz to 20 kHz, ±0.5 dB
THD + Noise 0.10% @ 1 kHz at nominal level
S/N >80 dB at maximum output (unweighted)
CMRR 65 dB @ 20 Hz to 20 kHz
Audio bits per sample 18 bits per channel, 2 channels (L, R)
Sampling rate 48 kHz
Audio output
Number/signal type 2 buffered outputs: 1 balanced stereo; 1 unbalanced stereo or 2 unbalanced mono
Connectors (1) 3.5 mm captive screw connector, 5 pole
(1) 3.5 mm mini stereo jack
Impedance 50 ohms unbalanced, 100 ohms balanced
Nominal level +4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
Maximum level (Hi-Z) >+19 dBu, unbalanced at 1% THD+N
Maximum level (600 ohm) >+15 dBm, unbalanced at 1% THD+N
Audio delay 1.5 frames
Control/remote
Serial control ports
Control 1 RS-232, 3.5 mm captive screw connector, 5 pole (3 pins are used) (rear panel)
1 RS-232, 2.5 mm mini stereo jack (front panel)
Pass-through 1 RS-232, 3.5 mm captive screw connector, 5 pole (3 pins are used) (rear panel)
Baud rate and protocol
Control 9600 baud, 8 data bits, 1 stop bit, no parity
Pass-through 9600 to 115,200 baud
Serial control pin configurations Captive screw connectors: 1 = Tx, 2 = Rx, 3 = GND
Mini stereo jack: tip = Tx, ring = Rx, sleeve = GND
Program control Extron control/configuration program for Windows ®
Extron Simple Instruction Set (SIS )
General
Power supply Internal
Input: 100-240 VAC, 50-60 Hz
Power consumption 10.9 watts
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling Convection, vents on top and sides
Mounting
Rack mount Yes, with optional rack shelf kit
Furniture mount Yes, with optional under desk mounting kit
Enclosure type Metal
Enclosure dimensions 1.7" H x 8.7" W x 9.5" D (1U high, half rack wide)
(4.3 cm H x 22.1 cm W x 24.1 cm D)
(Depth excludes connectors and knobs.)
Product weight 2.3 lbs (1.0 kg) per unit, 4.6 lbs (2.1 kg) per pair
Shipping weight 4 lbs (2 kg) per unit, 8 lbs (4 kg) per pair
Vibration ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety CE, c-UL, UL
EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
Warranty 3 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.
(8.1-112514-D2)
暂无相关附件!!!
暂无相关下载!!!