| 经销商 | 联系方式 |
|---|---|
| 爱思创Extron电子 | 4000.398766、 021-3760 1568 |
Extron Extender Plus 是一款 1 路输入、1 路缓冲输出的线路驱动器，可通过 Extron MHR 微型高分辨率电缆或同等电缆将 VGA-QXGA 和 HDTV 分量视频信号延长至 75 m (250') 远的距离。它还支持非平衡计算机立体声音频，并将其转换为平衡的线路电平立体声音频。可变电平/峰值控制提供的均衡功能可对长距离电缆传输时所产生的信号损失和高频衰减进行补偿。为了简化集成，Extender Plus 采用了 EDID 管理器 (EDID Minder ® )，这是一项 Extron 独有的技术，可自动地管理设备之间的 EDID 通信。Extender Plus 具有 decorator 型和 AAP 型两种规格，非常适用于通过长距离电缆延长计算机视频和音频信号的多种应用环境。
Extron Extender Plus 是一款 1 路输入、1 路缓冲输出的线路驱动器，可通过 Extron MHR 微型高分辨率电缆或同等电缆将 VGA-QXGA 和 HDTV 分量视频信号延长至 75 m (250') 远的距离。它还支持非平衡计算机立体声音频，并将其转换为平衡的线路电平立体声音频。可变电平/峰值控制提供的均衡功能可对长距离电缆传输时所产生的信号损失和高频衰减进行补偿。为了简化集成，Extender Plus 采用了 EDID 管理器 (EDID Minder
® )，这是一项 Extron 独有的技术，可自动地管理设备之间的 EDID 通信。Extender Plus 具有 decorator 型和 AAP 型两种规格，非常适用于通过长距离电缆延长计算机视频和音频信号的多种应用环境。
特性
通过 Extron MHR 微型高分辨率电缆将 VGA 信号延长至 75 m (250') 远的距离
400 MHz (-3 dB) RGB 视频带宽
支持高达 2048x1536 的 PC 分辨率和 HDTV 分量视频信号
EDID 管理器 (EDID Minder ® ) 自动地管理已连接设备之间的 EDID 通信
三位置峰值/增益控制，有助于在长距离电缆传输时保持视频信号的完整性
有源 PC 音频接口可以将非平衡音频转换为平衡线路电平音频
随附外置 Extron Everlast™ 电源，产品编号 #70-1174-01 — 该全球通用型电源具有经验证的高可靠性和低功耗，能够降低运行成本
Extron Everlast 电源可享受 7 年部件及人工保修
示意图
面板图
| Extender Plus Series | |||
| Video | |||
|---|---|---|---|
| Gain | 0 dB, 0.6 dB, 1.2 dB, selectable (when input is 0.7 Vp-p, output is 0.7 V, 0.75 V, 0.8 Vp-p) | ||
| Bandwidth | 400 MHz (-3 dB) | ||
| Video input | |||
| Number/signal type | 1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video | ||
| Connectors | 1 female 15-pin HD | ||
| Nominal level | 1.0 Vp-p for Y of component video 0.7 Vp-p for RGB and for R-Y and B-Y of component video |
||
| Minimum/maximum levels | Analog: 0.3 V to 1.5 Vp-p with no offset at unity gain | ||
| Impedance | 75 ohms | ||
| Horizontal frequency | 15 kHz to 135 kHz | ||
| Vertical frequency | 30 Hz to 170 Hz | ||
| Input coupling | DC | ||
| ID bits | Pins 4 and 11: terminated to ground Pins 12 and 15: used for EDID Minder |
||
| Video output | |||
| Number/signal type | 1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video | ||
| Connectors | 5 female BNC on pigtails RGB: 3" (7.6 cm) pigtails HV: 5" (12.7 cm) pigtails |
||
| Nominal level | 1.0 Vp-p for Y of component video 0.7 Vp-p for RGB and for R-Y and B-Y of component video |
||
| Minimum/maximum levels | Analog: 0.3 V to 1.5 Vp-p with no offset at unity gain | ||
| Impedance | 75 ohms | ||
| DC offset | ±5 mV with input at 0 offset | ||
| Return loss | >35 dB @ 5 MHz | ||
| Sync | |||
| Input type | RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level component video sync | ||
| Output type | RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level component video sync | ||
| Input level | 2.0 V to 5.0 Vp-p | ||
| Output level | TTL: 5 Vp-p, unterminated | ||
| Input impedance | 510 ohms | ||
| Output impedance | 75 ohms | ||
| Max. propagation delay | 18.8 ns | ||
| Max. rise/fall time | 4 ns | ||
| Polarity | Positive or negative (follows input) | ||
| Audio | |||
| Gain | Unbalanced output: 0 dB; balanced output: +6 dB | ||
| Frequency response | 20 Hz to 20 kHz, ±0.5 dB | ||
| THD + Noise | 0.01% @ 1 kHz at nominal level | ||
| S/N | >90 dB at rated maximum output | ||
| Stereo channel separation | >75 dB @ 20 Hz to 20 kHz | ||
| Audio input | |||
| Number/signal type | 1 stereo, unbalanced | ||
| Connectors | (1) 3.5 mm mini stereo jack | ||
| Impedance | >10k ohms unbalanced, DC coupled | ||
| Nominal level | -10 dBV (316 mVrms) | ||
| Maximum level | +6 dBV, (unbalanced) at 1% THD+N | ||
| Audio output | |||
| Number/signal type | 1 stereo, balanced/unbalanced | ||
| Connectors | (1) 3.5 mm direct insertion captive screw connector, 5 pole | ||
| Impedance | 50 ohms unbalanced, 100 ohms balanced | ||
| Nominal level | -2 dBu, balanced; -10 dBV unbalanced | ||
| Maximum level (Hi-Z) | +14 dBu, balanced, at 1% THD+N | ||
| Maximum level (600 ohm) | +6 dBm, balanced, at 1% THD+N | ||
|
|||
| General | |||
| Power supply | External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1 A, 12 watts |
||
| Power consumption | |||
| Device | 1.4 watts, 12 VDC | ||
| Device and power supply | 1.7 watts, 100-240 VAC, 50-60 Hz | ||
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
| Cooling | Convection, no vents | ||
| Thermal dissipation | |||
| Device | 4.4 BTU/hr | ||
| Device and power supply | 5.6 BTU/hr | ||
| Mounting | |||
| Furniture or wall mount | |||
| Extender Plus AAP | Yes, with optional AAP mounting faceplates | ||
| Extender Plus D | Yes, in a standard 1 gang US electrical wall box or included mud ring | ||
| Enclosure type | Metal (Extender Plus D has a metal faceplate and a plasticdecorator-style wall plate.) | ||
| Enclosure dimensions | |||
| Extender AAP Plus | |||
| Faceplate | 1.4" H x 3.5" W x 0.1" D (3.6 cm H x 8.9 cm W x 0.3 cm D) (double space high AAP plate) |
||
| Enclosure | 1.4" H x 2.7" W x 1.3" D* (3.6 cm H x 6.9 cm W x 3.3 cm D*) (*Depth excludes BNC connectors and cables. Allow at least 1.6" (4.1 cm) depth for connector and cable bend radius.) |
||
| Extender Plus D | |||
| Faceplate | 2.6" H x 1.3" W x 0.3" D (6.6 cm H* x 3.3cm W x 0.6cm D) (Depth excludes connectors. Fits the opening in a 1 gang decorator-style wallplate.) *Overall height is 4.1" (10.4 cm) including mounting tabs. Mounting holes are 3.8" [9.5cm] apart on center. |
||
| Enclosure | 2.7" H x 1.8" W x 1.3" D* (6.9 cm H x 4.6 cm W x3.3 cm D*) (*Depth excludes BNC connectors and cables. Allow at least 1.6" (4.1 cm) depth for connector and cable bend radius.) |
||
| Product weight | 0.2 lbs (0.1 kg) | ||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
| Regulatory compliance | |||
| Safety | CE, c-UL, UL | ||
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI Class A | ||
| Environmental | Complies with the appropriate requirements of RoHS, WEEE. | ||
| Product warranty | 3 years parts and labor | ||
| Everlast power supply warranty | 7 years parts and labor | ||
|
|||
|
|||
| (041717-D4) | |||
首页