| 经销商 | 联系方式 |
|---|---|
| 爱思创Extron电子 | 4000.398766、 021-3760 1568 |
Extron Extender WM 系列是一个1 路输入1 路缓冲输出线性驱动器系列，可通过Extron MHR-5 微型高分辨率（Mini HR）等高质量电缆，将高清晰度VGA—QXGA 视频与音频信号发送远达75 米。 Extender 系列线性驱动器提供视频放大与峰值调整，以补偿长距离电缆传输过程中经常产生的电压损失与高频衰减。
Extender A AP 为独立式双格A AP - 结构化安装适配板。Extender WM 可通过一单元墙盒安装于墙面，且安装后可与墙面、讲台或桌面保持齐平。 Extender WM A AP 有四个单格A AP - 结构化安装适配板开口，可通过三单元墙盒安装于墙面，且安装后可与墙面、讲台或桌面保持齐平。Extender AAP EX 含有加长短抽头。所有型号只提供黑色。
Extron Extender WM 系列是一个1 路输入1 路缓冲输出线性驱动器系列，可通过Extron MHR-5 微型高分辨率（Mini HR）等高质量电缆，将高清晰度VGA—QXGA 视频与音频信号发送远达75 米。 Extender 系列线性驱动器提供视频放大与峰值调整，以补偿长距离电缆传输过程中经常产生的电压损失与高频衰减。
Extender A AP 为独立式双格A AP - 结构化安装适配板。Extender WM 可通过一单元墙盒安装于墙面，且安装后可与墙面、讲台或桌面保持齐平。 Extender WM A AP 有四个单格A AP - 结构化安装适配板开口，可通过三单元墙盒安装于墙面，且安装后可与墙面、讲台或桌面保持齐平。Extender AAP EX 含有加长短抽头。所有型号只提供黑色。
特性
安装在可容纳 1 个双格 AAP（结构化安装适配板）的产品内
Extender AAP EX 随带 46 cm 的电缆，便于使用 HSA 接线盒
输入：15 针HD 插座和3.5 mm 微型立体声插孔
输出：插座式BNC 和螺丝锁定器
300 MHz (-3 dB) 的RGB 视频带宽
与 VGA-QXGA 图形卡兼容
提供外置型国际通用电源，产品编号为 # 70-055-01
注: Part number 70-147-02 has been retired.
示意图
面板图
| Extender Series | |||
| Video | |||
|---|---|---|---|
| Gain | 0 dB, 0.6 dB, 1.2 dB, selectable (when input is 0.7 Vp-p, output is 0.7 V, 0.75 V, 0.8 Vp-p) | ||
| Bandwidth | 300 MHz (-3 dB) | ||
|
|||
| Video input | |||
| Number/signal type | 1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video | ||
| Connectors | 1 female 15-pin HD | ||
| Nominal level | 1.0 Vp-p for Y of component video 0.7 Vp-p for RGB and for R-Y and B-Y of component video |
||
| Minimum/maximum levels | Analog: 0.3 V to 1.5 Vp-p with no offset at unity gain | ||
| Impedance | 75 ohms | ||
| Horizontal frequency | 15 kHz to 135 kHz | ||
| Vertical frequency | 30 Hz to 170 Hz | ||
| Input coupling | DC | ||
| ID bits | Pins 4 and 11: terminated to ground Pins 12 and 15: floating |
||
| Video output | |||
| Number/signal type | 1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video | ||
| Connectors | |||
| Extender AAP EX | 5 female BNC onpigtails RGB: 20" (50.8 cm) pigtails HV: 18" (45.7 cm) pigtails |
||
| All other models | 5 female BNC on 3" (7.6 cm) pigtails | ||
| Nominal level | 1.0 Vp-p for Y of component video 0.7 Vp-p for RGB and for R-Y and B-Y of component video |
||
| Minimum/maximum levels | Analog: 0.3 V to 1.5 Vp-p with no offset at unity gain | ||
| Impedance | 75 ohms | ||
| DC offset | ±5 mV with input at 0 offset | ||
| Return loss | <-35 dB @ 5 MHz | ||
| Sync | |||
| Input type | RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level component video sync | ||
| Output type | RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level component video sync | ||
| Input level | 2.0 V to 5.0 Vp-p | ||
| Output level | TTL: 5 Vp-p, unterminated | ||
| Input impedance | 510 ohms | ||
| Output impedance | 75 ohms | ||
| Max. propagation delay | 18.8 ns | ||
| Max. rise/fall time | 4 ns | ||
| Polarity | Positive or negative (follows input) | ||
| Audio | |||
| Gain | Unbalanced output: 0 dB; balanced output: +6 dB | ||
| Frequency response | 20 Hz to 20 kHz, ±0.5 dB | ||
| THD + Noise | 0.025% @ 1 kHz, 0.020% @ 20 kHz at nominal level | ||
| S/N | >90 dB at rated maximum output | ||
| Stereo channel separation | >75 dB @ 20 Hz to 20 kHz | ||
| Audio input | |||
| Number/signal type | 1 stereo, unbalanced | ||
| Connectors | (1) 3.5 mm mini stereo jack | ||
| Impedance | >10k ohms unbalanced, DC coupled | ||
| Nominal level | -10 dBV (316 mVrms) | ||
| Maximum level | +6 dBV, (unbalanced) at 1% THD+N | ||
| Audio output | |||
| Number/signal type | 1 stereo, balanced/unbalanced | ||
| Connectors | (1) 3.5 mm direct insertion captive screw connector, 5 pole | ||
| Impedance | 50 ohms unbalanced, 100 ohms balanced | ||
| Nominal level | -2 dBu, balanced; -10 dBV unbalanced | ||
| Maximum level (Hi-Z) | +14 dBu, balanced, at 1% THD+N | ||
| Maximum level (600 ohm) | +6 dBm, balanced, at 1% THD+N | ||
|
|||
| General | |||
| External power supply | 100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A, regulated | ||
| Power input requirements | 12 VDC, 0.2 A | ||
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
| Cooling | Convection, no vents | ||
| Mounting | |||
| Floor box mount | |||
| Extender AKM UK AAP | Ackerman UK floor box mountable | ||
| Extender AKM MAAP | Ackerman floor box mountable in either a GB2 or a GB3 mounting space | ||
| Furniture mount | |||
| Extender AAP EX | Mountable in an optional HSA 800 Series or HSA 400 Series Hideaway Surface Access Enclosure, which can be mounted in furniture | ||
| Extender WM AUS | Wall or furniture mountable in a standard Australian electrical wall box | ||
| Extender AAP | Wall or furniture mountable with optional AAP mounting faceplates | ||
| All other models | Wall or furniture mountable in a standard US electrical wall box | ||
| Enclosure type | Metal (Extender D has a metal faceplate and a plastic decorator-style wall plate.) | ||
| Enclosure dimensions | |||
| Extender AAP, Extender AAP EX | |||
| Faceplate | 1.4" H x 3.5" W x 0.1" D (3.6 cm H x 8.9 cm W x 0.3 cm D) (double space high AAP plate) |
||
| Buffer | 1.1" H* x 2.75" W x 1.2" D (2.8 cm H* x 7.0 cm W x 3.0 cm D) (*Height excludes BNC connectors and cables.) |
||
| Extender WM | |||
| Faceplate | 4.5" H x 2.8" W x 0.1" D (11.4 cm H x 7.1 cm W x 0.3 cm D) (1 gang) |
||
| Buffer | 2.7" H x 1.8" W x 0.75" D* (6.9 cm H x 4.6 cm W x 1.9 cm D*) (*Depth excludes BNC connectors and cables.) |
||
| Extender WM AUS | |||
| Faceplate | 3.0" H x 4.7" W x 0.1" D (7.6 cm H x 11.8 cm W x 0.3 cm D) | ||
| Buffer | 2.75" H* x 1.1" W x 1.2" D (7.0 cm H* x 2.8 cm W x 3.0 cm D) (*Height excludes BNC connectors and cables.) |
||
| Extender WM AAP | |||
| Faceplate | 4.5" H x 6.4" W x 0.1" D (11.4 cm H x 16.3 cm W x 0.3 cm D) (3 gang) |
||
| Buffer | 2.7" H x 1.8" W x 0.75" D* (6.9 cm H x 4.6 cm W x 1.9 cm D*) (*Depth excludes BNC connectors and cables.) |
||
| Extender MK | |||
| Faceplate | 3.4" H x 5.7" W (8.6 cm H x 14.4 cm W) (UK knockout box size) |
||
| Buffer | 1.1" H* x 2.75" W x 1.2" D (2.8 cm H* x 7.0 cm W x 3.0 cm D) (*Height excludes BNC connectors and cables.) |
||
| Extender AKM UK AAP | |||
| Faceplate | 3.0" H x 8.1" W x 0.6" D (7.6 cm H x 20.6 cm W x 1.5 cm D) |
||
| Buffer | 1.1" H* x 2.75" W x 1.2" D (2.8 cm H* x 7.0 cm W x 3.0 cm D) (*Height excludes BNC connectors and cables.) |
||
| Extender AKM MAAP | |||
| Faceplate | 1.67" H x 6.12" to 7.85" W* x 3.0" D (4.1 cm H x 15.5 cm to 19.9 cm W* x 7.6 cm D) *Width is adjustable. |
||
| Buffer | 1.8" H x 4.4" W x 3.0" D (4.6 cm H x 11.2 cm W x 7.6 cm D) |
||
| Extender D | |||
| Faceplate | 2.6" H* x 1.3" W x 0.1" D (6.6 cm H* x 3.3 cm W x 0.3 cm D) (Fits the opening in a 1 gang decorator-style faceplate. *Height is 3.8" [9.7 cm] including mounting tabs.) |
||
| Buffer | 2.7" H x 1.8" W x 0.75" D* (6.9 cm H x 4.6 cm W x 1.9 cm D*) (*Depth excludes BNC connectors and cables.) |
||
| Product weight | |||
| Extender AAP, Extender AAP EX, Extender WM | 0.2 lbs (0.1 kg) | ||
| Extender WM AUS | 0.3 lbs (0.1 kg) | ||
| Extender WM AAP | 0.4 lbs (0.2 kg) | ||
| Extender MK | 0.5 lbs (0.3 kg) | ||
| Extender AKM UK AAP | 0.6 lbs (0.3 kg) | ||
| Extender AKM MAAP | 1.2 lbs (0.5 kg) | ||
| Extender D | 0.2 lbs (0.1 kg) | ||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
| Regulatory compliance | |||
| Safety | CE, c-UL, UL | ||
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI | ||
| Warranty | 3 years parts and labor | ||
|
|||
|
|||
| (4003-D19-042017) | |||
首页