爱思创Extron电子-产品详情-DAV音视工程网

经销商	联系方式
爱思创Extron电子	4000.398766、 021-3760 1568

　　Extron PowerCage™ FOX 3G HD-SDI 光纤延长器是专为 PowerCage 1600 设计的模块化收发器，可以在单根光纤上远距离传输带嵌入式音频和元数据的多速率 SDI 视频。其设计注重可靠性和出色的高分辨率图像性能，使用 Extron 独特的全数字技术传输高达 2.97 Gbps 的多速率 SDI 信号，包括 SDI、HD-SDI 和 3G-SDI。为了能够优化输入到和从PowerCage FOX 3G HD-SDI 输出的 SDI 信号，输入信号可被自动均衡，输出信号也能进行时钟恢复。PowerCage FOX 3G HD-SDI 在不同的用户配置模式下可用作发送器和接收器。

　　特性

　　通过单根光纤极长距离地延长 SDI、HD-SDI 和 3G-SDI 信号

　　设计用于 PowerCage 1600 机箱的模块化、可热插拔的板卡，产品编号 # 60-978-01

　　可轻松地集成到广泛的 4K 环境

　　输入均衡和缓冲输出时钟恢复

　　双缓冲输出

　　菊花链功能

　　最新 经 JITC 验证

　　示意图

Product Diagram

　　面板图

Panel Drawing

PowerCage™ FOX 3G HD-SDI

NOTE	The PowerCage FOX 3G HD-SDI board is available in singlemode or multimode version.

NOTE	The PowerCage FOX 3G HD-SDI board isa class1 laser product. It meets the safety regulations of IEC-60825, FDA21 CFR1040.10, and FDA21 CFR1040.11.

Optical fiber interconnection between transmitter and receiver

Number/type

1 singlemode or 1 multimode fiber optic input and output per FOX board

Connectors

2 bidirectional LC connectors per FOX board

Operating distance

Singlemode

30 km (18.75 miles) with singlemode (SM) cables with a SM board

Multimode

300 m (985') with 62.5 µm OM1 multimode (MM) cable and a MM board
1 km (3280') with 50 µm OM2 multimode (MM) cable and a MM board
2 km (6561') with 50 µm OM3/OM4 2000 MHz bandwidth laser optimizedMM cable and a MM board

NOTE	Operating distance is approximate. These are typical distances. The maximum distance may be greater than these typical numbers depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.

Nominal peak wavelength

850 nm for multimode (MM), 1310 nm for singlemode (SM)

Transmission power, singlemode or multimode

-5 dBm, typical

Maximum receiver sensitivity

Singlemode

-18 dBm, typical

Multimode

-12 dBm, typical

Optical loss budget

Singlemode

13 dB, maximum

Multimode

7 dB, maximum

Maximum channel data rate

4.25 Gbps

Video

NOTE	The PowerCage FOX 3G HD-SDI is a transceiver that can function as a transmitter or as a receiver. Two units are required for a transmitter-receiver system with one fiber optic cable linking the two units.

Signal type

HD-SDI, SDI, and 3G-SDI digital video signals

Gain

Unity

Resolution

8 or 10 bits, automatic

Data rates

270 Mbps, 1.485 Gbps, 2.970 Gbps

Operation standards

SMPTE 259M-C, SMPTE 292M, SMPTE 424M, ITU-R BT.601, ITU-R BT.1120

Auto data rate lock

Yes

Video input — PowerCage FOX 3G HD-SDI transmitter

Number/signal type

1 single link SDI, HD-SDI, or 3G-SDI digital component video

Connectors

1 female BNC

Data rates

19 Mbps to 2.97 Gbps

Nominal level

0.8 Vp-p

Minimum/maximum levels

0.5 V to 1 Vp-p with no offset

Impedance

75 ohms

Return loss

≥15 dB @ 5 MHz to 1.5 GHz
≥10 dB @ 1.5 GHz to 3 GHz

DC offset (max. allowable)

5 V

Input coupling

AC

Input cable equalization

Automatic for up to -30 dB of cable loss

HD-SDI

120 m (400') using Extron RG6 cable
90 m (300') using Extron RG59 cable

SDI

150 m (500') using Extron RG6 cable
120 m (400') using Extron RG59 cable

NOTE	The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system.

Video output — PowerCage FOX 3G HD-SDI receiver

Number/signal type

2 single link SDI, HD-SDI, or 3G-SDI digital component video

Connectors

2 female BNC

Re-clocking

Automatic for 270 Mbps, 1.485 Gbps, 2.97 Gbps, or bypassed for unrecognized rates

Nominal level

0.8 Vp-p

Minimum/maximum levels

0.5 V to 1.0 Vp-p

Impedance

75 ohms

Return loss

>25 dB @ 100 MHz

DC offset

±5 mV with input at 0 offset

Control/remote

Serial control port

1 bidirectional RS-232, 2.5 mm captive screw connector

Baud rate and protocol

9600 baud, 8 data bits, 1 stop bit, no parity

Serial control pin configuration

1 = Tx, 2 = Rx, 3 = GND

Program control

Extron control/configuration program for Windows ^®
Extron Simple Instruction Set (SIS ^™ )

General

Power

Supplied by a PowerCage 1600 enclosure

Power consumption

1.84 watts

Power input requirements

12 VDC, 1.0 A, supplied by the PowerCage enclosure

Temperature/humidity

Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

Cooling

Enclosure: fans, front to back
Boards: convection, within the PowerCage enclosure

Thermal dissipation

27.6 BTU/hr

Enclosure type

Metal

Dimensions

Each board fits a double slot opening in a PowerCage enclosure.

Product weight

1.1 lbs (0.5 kg)

Shipping weight

2 lbs (1 kg)

Vibration

ISTA 1A in carton (International Safe Transit Association)

Regulatory compliance

Safety

CE, c-UL, FDA Class 1, UL

EMI/EMC

CE, C-tick, FCC Class A, ICES, VCCI

Environmental

Complies with the appropriate requirements of RoHS, WEEE.

Warranty

3 years parts and labor

NOTE	All nominal levels are at ±10%.

NOTE	Specifications are subject to change without notice.

(8.0-012513-D2)

暂无相关附件!!!

暂无相关下载!!!