| 经销商 | 联系方式 |
|---|---|
| 爱思创Extron电子 | 4000.398766、 021-3760 1568 |
Extron DTP HDMI 301 是一组发送器和接收器，用于通过单根 CATx 电缆长距离传输 HDMI 视频、嵌入的音频以及双向控制信号。为增加灵活性和便捷性，可在第二根双绞线电缆上单独传输模拟立体声音频信号。它兼容 HDMI 1.3，并能够将 1080p/60 深色和 1920x1200 信号发送至 100 m 远的距离。这些便于集成的特性与其小巧的外壳尺寸以及任一设备上的远程供电功能相结合，使 DTP HDMI 301 非常适合在空间有限的环境中传输视频、多声道音频和双向控制信号。
Extron DTP HDMI 301 是一组发送器和接收器，用于通过单根 CATx 电缆长距离传输 HDMI 视频、嵌入的音频以及双向控制信号。为增加灵活性和便捷性，可在第二根双绞线电缆上单独传输模拟立体声音频信号。它兼容 HDMI 1.3，并能够将 1080p/60 深色和 1920x1200 信号发送至 100 m 远的距离。这些便于集成的特性与其小巧的外壳尺寸以及任一设备上的远程供电功能相结合，使 DTP HDMI 301 非常适合在空间有限的环境中传输视频、多声道音频和双向控制信号。
特性
通过单根 CATx 电缆传输 HDMI 以及 RS-232和红外信号
将 1080p/60 深色和 1920x1200 信号延长至100 m 远的距离
可与 CAT 5e, CAT 6 和 CAT 7 双绞线电缆配合使用
单独传输模拟立体声音频信号
兼容 HDMI 1.3
符合 HDCP 标准
发送器和接收器支持远程供电
示意图
面板图
| DTP HDMI 301 Tx/Rx | |||
|
|||
|
|||
| Video | |||
|---|---|---|---|
| Maximum data rate | 6.75 Gbps (2.25 Gbps per color) | ||
| Maximum pixel clock | 165MHz | ||
| Resolution range | Up to 1920x1200 or 1080p @ 60 Hz; 8, 10, or 12 bit color depth | ||
| Formats | RGB and YCbCr digital video | ||
| Standards | DVI 1.0, HDMI | ||
| Video input — transmitter | |||
| Number/signal type | 1 single link HDMI (or DVI-D*) | ||
| Connectors | 1 female HDMI type A | ||
| Interconnection between transmitter and receiver | |||
| Connectors | 2 female RJ-45 per unit for 2 cables connecting the transmitter and receiver TP1 output transmits digital video, embedded digital audio, RS-232, IR, and remote power. TP2 output transmits analog stereo audio. |
||
| Termination standards | TIA/EIA T568A or T568B | ||
| Signal transmission distance | 330' (100 m) using CAT 5e/6/7 UTP or STP cable (24 AWG or better) | ||
| Video output — receiver | |||
| Number/signal type | 1 single link HDMI (or DVI-D*) | ||
| Connectors | 1 female HDMI type A | ||
| Audio | |||
| Gain | Unbalanced output: 0 dB; balanced output +6 dB | ||
| Frequency response | 20 Hz to 20 kHz, ±0.05 dB | ||
| THD + Noise | 0.03% @ 20 Hz to 20 kHz at maximum output | ||
| S/N | >90 dB, at maximum output (15 dBu), balanced (unweighted) | ||
| Stereo channel separation | >80 dB @ 1 kHz to 20 kHz | ||
| Audio input | |||
| Number/signal type | 1 PC level stereo, unbalanced | ||
| Connectors | (1) 3.5 mm stereo jack, 2 channel; tip (L), ring (R), sleeve (ground) | ||
| Impedance | >10k ohms, DC coupled | ||
| Nominal level | -10 dBV (316 mVrms) | ||
| Maximum level | +7 dBV (unbalanced) | ||
|
|||
| Audio output | |||
| Number/signal type | 1 stereo (2 channel), balanced/unbalanced | ||
| Connectors | (1) 3.5 mm captive screw connector, 5 pole | ||
| Impedance | 50 ohms unbalanced, 100 ohms balanced | ||
| Gain error | ±0.1 dB channel to channel | ||
| Maximum level (600 ohm) | >+15 dBu, balanced | ||
| Control/remote — external device (pass-through, unidirectional or bidirectional) | |||
| Serial control port input/output | |||
| Transmitter | RS-232 via (1) 3.5 mm, 5 pole captive screw connector for RS-232 control (±5 V) (connector is shared with IR control port) | ||
| Receiver | 1 set of proprietary signals on a female RJ-45 jack | ||
| Serial control port output/input | |||
| Transmitter | 1 set of proprietary signals on a female RJ-45 jack | ||
| Receiver | RS-232 via a 3.5 mm, 3 pole captive screw connector | ||
| Baud rates | Up to 115200 baud | ||
| Protocol | Data bits = 5 - 8 Stop bits = 1 or 2 Parity = odd, even, none Flow control = XON, XOFF, none |
||
| Serial control pin configuration | 1 = Tx, 2 = Rx, 3 = GND | ||
| IR control port | (1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port) TTL level (0 to 5 V) modulated infrared controlfrom 30 kHz up to 60 kHz |
||
| IR control pin configuration | 3 = GND, 4 = IR Tx, 5 = IR Rx | ||
| General | |||
| Power supply | External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1 A, 12 watts |
||
| Power consumption | 7.0 watts, 12 VDC, total, for both transmitter and receiver | ||
|
|||
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
| Cooling | Convection, no vents | ||
| Mounting | |||
| Rack mount | Yes, with optional 1U high rack shelf | ||
| Furniture mount | Yes, with optional under-desk mounting kit | ||
| Enclosure type | Metal | ||
| Enclosure dimensions | |||
| Transmitter | 1.0" H x 4.3" W x 3.0" D (quarter rack wide) (2.5 cm H x 10.9 cm W x7.6 cm D) (Depth excludes connectors.) |
||
| Receiver | 1.0" H x 4.3" W x 6.0" D (quarter rack wide) (2.5 cm H x 10.9 cm W x 15.2 cm D) (Depth excludes connectors.) |
||
| Product weight | |||
| Transmitter | 0.5 lbs (0.3 kg) | ||
| Receiver | 1.0 lb (0.5 kg) | ||
| Shipping weight | 3 lbs (2 kg) | ||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
| Regulatory compliance | |||
| Safety | CE, c-UL, UL | ||
| EMI/EMC | CE**, C-tick, FCC Class A**, ICES, VCCI | ||
|
|||
| Warranty | 3 years parts and labor | ||
|
|||
|
|||
| (8.0-053112-D6) | |||
首页