经销商 | 联系方式 |
---|---|
爱思创Extron电子 | 4000.398766、 021-3760 1568 |
Extron System 5 IP 是一个 5 路输入 1 路输出的集成型音视频切换器,它为教室、会议室、会议中心和多媒体环境,提供了一个一体化的经济型解决方案.
其主要特性包括可配置的输入、简便易用的红外学习功能、通过 RS-232 实现的可定制显示控制、房间控制用继电器控制,集成的 40 瓦 (rms) 音频放大器以及 IP Link® 以太网监控。
通用投影机控制
System 5 IP 切换器可提供两种投影机控制方法:RS-232 或红外。它可以通过遥控器来学习红外信号指令。这使得该切换器能够和显示设备以及信号源,比如录像机和 DVD 播放机,进行通讯。红外学习功能使得系统设置和操作变得简单并可进行定制。实际上,任何通过 RS-232 可控制的投影机或显示设备都可以和 System 5 IP 切换器一起使用。Extron 编制和管理了大量的市面上常见的投影机控制驱动程序,使得 System 5 IP 可以控制投影机的一些主要功能,比如电源开关和输入选择等。用户也可以自己编制投影机驱动程序或从 Extron 网站上去下载最新的和最通用的投影机的 RS-232 驱动程序。此外,一个可定制的配置模式,可允许用户自行定义红外或 RS-232 指令。
房间控制
System 5 IP 也提供了房间控制功能,所以房间照明,屏幕设置以及其它设备的功能可以通过该切换器内部的 6 个继电器开关来控制。通过提供投影机控制、房间控制和显示设备的通用兼容性以及具有系统音频能力,System 5 IP 将通常需要由 6 种不同设备来实现的功能整合到一个单独设备中。
固定和可变的前置放大器线路电平输出
System 5 IP 提供了通过螺丝锁定器输出的固定和可变的电平音频,可和外部功放或有源音箱一起使用。,固定音频输出最适合用于外部混响器、功放和可助收听装置等器材。可变音频输出使得音频信号电平可以通过切换器的音量控制来进行调节。
集成的立体声音频功放器
System 5 IP 可带有或不带有一个内置的 40 瓦音频功率放大器, 2 x 20 瓦 (rms) ,用以驱动 4 或 8 欧姆的扬声器。它也可以设置成两个单通道模式,将左、右通道输入信号叠加在一起,并驱动相同的单通道信号到左、右两个输出。
IP Link® 以太网控制
System 5 IP装备了 Extron 专利的 IP Link®,一种为了满足专业音视频环境而特别设计的 IP 集成技术— 从小型的 K-12 教室到大型的高校和商业用途。IP Link 可提供如下技术优势:
·广泛兼容 — 所有的 IP Link 产品都使用工业标准的以太网通讯标准,包括 ARP, DHCP, ICMP (ping), TCP/IP, Telnet, HTTP, 和 SMTP。
·高性能结构 — 网页响应非常快,具有 6 Mbit/sec 的传输率,超过了其它同类产品。
·多用户支持 — 多点同时连接使得每一 IP Link 设备可以支持更多的协同工作用户并且通过并行发送信息,改善了系统性能。
·设备管理 — System 5 IP 提供了基于网页设备管理能力,特别对于具有 IP Link 技术的产品而设计,包括主动维护、事件安排、远程技术支持和偷窃预警等。
控制选项
系统切换器的控制是通过前面板背光照明按键来提供的,也可选择 IR 402 遥控器或 SCP 150 二级控制面板。 System 5 IP 的前面板背光照明的每个按键可以单独标注,用以准确地识别视频和音频输入的设置。此外,前面板按键还包括显示功能,比如开关、静音、视频模式和房间控制(升降屏幕、开启或关闭灯光等)。根据需要,System 5 IP 也能提供不带前面板控制的简化和经济型产品,但仍旧提供前面板上的 15- 针 HD 输入接口(RGBHV)。
可选的 IR 402 遥控器和 SCP 150 二级控制面板都可实现 System 5 IP 前面板控制功能,使得用户可以远程控制切换器的切换、投影机和房间控制功能。 SCP 150 AAP 包含了一个开口,可容纳直到 4 格 AAP – 结构适配面板。成百上千的 AAP 可以备选,其中的一些可提供直通式接口和红外控制选项。控制面板可安装在墙上、讲台或桌上,也可选用灰色、黑色或白色以便于融于环境中。
特性
·输入:2 路完全可配置的 BNC 插座输入端口和 2 路可配置 S -视频或复合视频接口;前面板输入可通过 15 针 HD 插座
·输出:用于视频的 BNC 插座;用于音频的螺丝锁定器
·350 MHz (-3 dB) RGB 视频带宽 — 维持信号的整体性
·通过 RS-232 或红外的通用显示控制 — 提供了和任一可控制显示设备的兼容性
·4 个红外串行控制端口
·预配置驱动程序 — Extron 提供可下载的、预配置 RS-232 或红外驱动程序,用于许多显示和信号源设备。切换器的前面板上为了便利,布置了一个配置端口。
·6 个用于房间控制的可配置继电器控制 — System 5 IP 装备了 6 个内部继电器开关用于控制灯光、屏幕设置和其它设备。这种继电器开关可以通过前面板、 IR 402 遥控器和 SCP 150 控制面板或 RS-232 来控制。
·针对 DVD ,录像机和 投影机控制的远程红外学习功能 — System 5 IP 可以进行红外学习,使得能通过使用可选的 IRCM 红外控制模块,比如 IRCM-DV+ ,来控制各种各样的信号源设备。
·RS-232 控制
·IP Link® 以太网监控 — 由 Extron 特别开发的 IP 集成技术满足了专业音视频环境的需求,使得 System 5 IP 可以在局域网、广域网或因特网上被控制和主动监测。
·7.25 MB 闪存 — System 5 IP 内置的网页服务器具有 7.25 MB 大小的闪存,可以储存 GlobalViewer® 全局察看软件和任何用户定制的网页。
·可选的 IR 402 遥控和 SCP 150 二级控制面板实现的远程控制能力
·固定和可变的前置放大线路电平音频输出
·某些型号内置了立体声音频功率放大器,可提供 40 瓦, 2x20 瓦 (rms) 用于 4 或 8 欧姆的扬声器 — 在绝缘的螺丝终端上输出经放大的立体声音频。
·双单通道模式— System 5 IP 可以被设定为将左、右输入信号叠加并且驱动相同的单通道信号到左右两个输出。
·集成的待机定时器在用户定义的时间后自动关闭投影机—节省电源、防止等离子电视灼伤、延长投影机灯泡寿命。
·FPC 正面板控制板,具有三色背照明按键按键可以自定义标签便于识别。由于这些按键被照亮,对用户在低光环境下使用非常有帮助。
·针对 RGB 延迟的三动作切换™ 在切换 RGB 信号时将画面瞬间静影,以消除可见的切换渐变。
·1U 高, 全架宽的金属外壳— 附有安装托架,用于安装在机架上或桌面下。
·内部国际电源供应
·包含 6 英尺 RJ-45 交叉电缆 (产品编号# 26-591-01)
·可选的 CFG 配置电缆可用于上载驱动成训,配置音频输入电平和视频选择类型
<^#^>
示意图
面板图
System 5 IP Switchers | ||||
Video | ||||
---|---|---|---|---|
Gain | Unity | |||
Bandwidth | 350 MHz (-3 dB), fully loaded | |||
Differential phase error | 1° at 3.58 MHz and 4.43 MHz | |||
Differential gain error | 1% at 3.58 MHz and 4.43 MHz | |||
Crosstalk | -68 dB @ 10 MHz, -39 dB @ 100 MHz | |||
Switching speed | <600 ms (max.) | |||
Video input | ||||
Number/signal type | 1 RGBHV, RGBS, RGsB, RsGsBs 2 RGBHV, RGBS, RGsB, RsGsBs, S-video, or composite video 2 S-video or composite video |
|||
Connectors | (1) 15-pin HD female (RGB) 2 x 5 female BNCs (RGB, S-video, or composite video) 2 x 1 female BNC (composite video) and (2) 4-pin mini DIN (S-video) |
|||
Nominal level | 1 Vp-p for Y of S-video, and for composite video 0.7 Vp-p for RGB 0.3 Vp-p for C of S-video |
|||
Minimum/maximum levels | ||||
RGB | Analog: 0.3 V to 1.5 Vp-p with no offset | |||
S-video, composite video | Analog: 0.4 V to 2.0 Vp-p with no offset | |||
Impedance | 75 ohms | |||
Horizontal frequency | 15 kHz to 145 kHz | |||
Vertical frequency | 30 Hz to 170 Hz | |||
Return loss | ||||
RGB | <-40 dB @ 5 MHz | |||
S-video | <-25 dB @ 0 to 10 MHz | |||
Composite video | <-40 dB @ 0 to 10 MHz | |||
DC offset (max. allowable) | 1.5 V | |||
Video output | ||||
Number/signal type | 1 RGBHV, RGBS, RGsB, RsGsBs 1 S-video 1 composite video |
|||
Connectors | 5 female BNCs (RGB) 2 female BNCs (S-video) 1 female BNC (composite video) |
|||
Nominal level | 1 Vp-p for Y of S-video, and for composite video 0.7 Vp-p for RGB 0.3 Vp-p for C of S-video |
|||
Minimum/maximum levels | ||||
RGB | Analog: 0.3 V to 1.5 Vp-p (follows input) | |||
S-video, composite video | Analog: 0.4 V to 2.0 Vp-p (follows input) | |||
Impedance | 75 ohms | |||
Return loss | <-40 dB @ 5 MHz | |||
DC offset | ±5 mV with input at 0 offset | |||
Switching type | Triple-Action™ (RGB delay) | |||
Sync | ||||
Input type | RGBHV, RGBS, RGsB, RsGsBs | |||
Output type | RGBHV, RGBS, RGsB, RsGsBs (follows input) | |||
Standards | TTL (RGB), NTSC 3.58, NTSC 4.43, PAL, SECAM | |||
Input level | 2.0 V to 5.0 Vp-p | |||
Output level | 5.0 Vp-p, unterminated | |||
Input impedance | 10k ohms | |||
Output impedance | 75 ohms | |||
Max. input voltage | 5.0 Vp-p | |||
Max. propagation delay | 30 ns | |||
Max. rise/fall time | 4 ns | |||
Polarity | Positive or negative (follows input) | |||
Audio | ||||
Gain | ||||
Lineout | Unbalanced output: 0 dB; balanced output: +6 dB | |||
Preamp | Unbalanced output: -6 dB; balanced output: 0 dB at max. volume | |||
Frequency response, amplifier models | ||||
Power amp (4 or 8 ohm) | 20 Hz to 20 kHz, 0 dB to -1.5 dB @ 1 watt output | |||
Lineout/preamp | 20 Hz to 20 kHz, 0 dB to -0.5 dB | |||
Frequency response, nonamplifier models | ||||
Lineout/preamp | 20 Hz to 20 kHz, 0 dB to -0.5 dB | |||
THD + Noise | <0.15% @ 1 kHz at max. power output | |||
S/N at max. power output or line level output (unweighted) | ||||
Power amp (amplifier models only) | >80 dB at 10 Hz to 22 kHz | |||
Preamp | >-100 dB at 20 Hz to 20 kHz | |||
Lineout | >-110 dB at 10 Hz to 22 kHz | |||
Crosstalk | <-80 dB @ 1 kHz, fully loaded | |||
Stereo channel separation | >80 dB @ 1 kHz | |||
CMRR | >80 dB @ 20 Hz to 200 Hz, >60 dB @ 20 Hz to 20 kHz | |||
Bass adjustment | ±10 dB @ 100 Hz | |||
Treble adjustment | ±10 dB @ 10 kHz | |||
Audio input | ||||
Number/signal type | 4 stereo or mono, balanced/unbalanced (inputs 1-4) 1 stereo or mono, unbalanced (input 5) |
|||
Connectors | (4) 3.5 mm captive screw connectors, 5 pole (inputs 1-4) (1) 3.5 mm mini audio jack (tip, ring, sleeve) (input 5) |
|||
Impedance | >10k ohms unbalanced | |||
Nominal level | -10 dBV (316 mVrms) | |||
|
||||
Maximum level | +18 dBu | |||
Input gain adjustment | -40 dB to +30 dB, adjustable per input | |||
Audio output — line level (all models) | ||||
Number/signal type | 2 stereo or mono, balanced/unbalanced (1 fixed and 1 variable) | |||
Connectors | (2) 3.5 mm captive screw connectors, 5 pole | |||
Impedance | 50 ohms unbalanced, 100 ohms balanced | |||
Gain error | ±0.1 dB channel to channel | |||
Nominal level | -10 dBV (316 mV) or +4 dBu (1.23 V) (configurable) | |||
Maximum level (600 ohm) | >+18 dBu, balanced at 1%THD+N | |||
|
||||
Audio output — power amplifier (amplifier models only) | ||||
Number/signal type | 1 stereo or mono (default = stereo, configurable via front panel or control software) | |||
Connector | (1) 4 position screw terminal | |||
Sensitivity | -22 dBV (80 mVrms, -19.8 dBu) for max. power output (adjustable) | |||
Power bandwidth at rated maximum power output | ||||
4 ohm output | 10 Hz to 20 kHz, ≤0.5% THD | |||
8 ohm output | 20 Hz to 20 kHz, ≤0.8% THD | |||
Drive/full power out | 40 watts; 20 watts (rms) per channel, 4 or 8 ohm load | |||
Protection | Input limiting, thermal, short circuit | |||
Control/remote — switcher host ports | ||||
Serial control port | 2 bidirectional RS-232: 1 rear panel 9-pin female D connector 1 front panel 2.5 mm stereo mini jack |
|||
Baud rate and protocol | 38400, 8-bit, 1 stop bit, no parity | |||
Serial control pin configurations | 2 = TX, 3 = RX, 5 = GND (9-pin D) tip = TX, ring = RX, sleeve = GND (mini stereo jack) |
|||
Ethernet control port | 1 RJ-45 female | |||
Ethernet data rate | 10/100Base-T, half/full duplex with autodetect | |||
Ethernet protocol | ARP, DHCP, ICMP (ping), TCP/IP, Telnet, HTTP, SMTP | |||
Ethernet default settings | Link speed and duplex level = autodetected IP address = 192.168.254.254 Subnet mask = 255.255.0.0 Default gateway = 0.0.0.0 DHCP = off |
|||
Web server | Up to 200 simultaneous sessions 7.25 MB nonvolatile user memory |
|||
Extron remote key pad (SCP) control | (1) 3.5 mm 5-pole captive screw connector (shared with control module and IR Link port) | |||
IR remote control | IR 402 (optional) Front panel: 30' maximum, 40 degrees off axis Rear panel: 38 kHz, hardwired, modulated |
|||
Program control | Extron's Global Configurator for Windows® Extron's Simple Instruction Set (SIS™) Microsoft® Internet Explorer ver. 6 or higher, Telnet |
|||
Control — relay | ||||
Number/type | 6 momentary or latching (configurable via software) | |||
Connectors | (3) 3.5 mm captive screw connectors, 3 pole | |||
Connector configuration | Groups A, B, C; each with 1 common and 2 normally open relays (default) | |||
Contact rating | 24 V, 1A | |||
Control — serial ports | ||||
Display control port | (1) 3.5 mm captive screw connector, 3 pole for bidirectional RS-232 control (±5 V) | |||
Baud rate and protocol | 115200 to 300 baud (9600 baud = default); 8 (default) or 7 data bits; 1(default) or 2 stop bits; no parity (default), or even or odd parity |
|||
Control — IR/serial ports | ||||
IR/serial control ports | (4) 3.5 mm captive screw connectors, 2-pole Programmable: RS-232 (±5 V), or TTL level (0 to 5 V) infrared up to 1 MHz |
|||
Baud rate and protocol (RS-232) | 115200 to 300 baud (9600 baud = default); 8 (default) or 7 data bits; 1(default) or 2 stop bits; no parity (default), or even or odd parity |
|||
IR learning frequencies | 30 kHz to 62 kHz | |||
IR learning distance | 4" (10 cm) to 14" (36 cm) from the front panel | |||
Control — digital input monitoring port | ||||
Number/type | 1 digital input | |||
Connector | (1) 3.5 mm captive screw connector, 2 poles of a 3 pole connector | |||
|
||||
Pin configuration | G = GND, IN = digital in or power sense | |||
Digital inputs | ||||
Input voltage range | 0-12 VDC | |||
Input impedance | 10k ohms | |||
Threshold low to high | >0.7 VDC, nonadjustable | |||
Threshold high to low | <0.6 VDC, nonadjustable | |||
General | ||||
Power | 100 VAC to 240 VAC, 50/60 Hz, 50 watts, internal | |||
Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +111 °F (0 to +43.9 °C) / 10% to 90%, noncondensing |
|||
Cooling | Convection, vented on sides and top | |||
Rack mount | Yes, with included brackets | |||
Enclosure type | Metal | |||
Enclosure dimensions | 1.75" H x 17.5" W x 9.4" D (1U high, full rack wide) 4.4 cm H x 44.4 cm W x 23.9 cm D (Depth excludes connectors, knob, and buttons. Width excludes rack ears.) |
|||
Product weight | 6.0 lbs (2.7 kg) | |||
Shipping weight | 11 lbs (5 kg) | |||
DIM weight | ||||
USA/Canada | 10 lbs (5 kg) | |||
International | 11 lbs (5 kg) | |||
Vibration | ISTA 1A in carton (International Safe Transit Association) | |||
Listings | UL, CUL | |||
Compliances | CE, FCC Class A, VCCI, AS/NZS, ICES, Section508 of the Rehabilitation Act (29U.S.C.794d) | |||
MTBF | 30,000 hours | |||
Warranty | 3 years parts and labor | |||
|
||||
|