返回
爱思创电子（上海）有限公司_爱思创Extron中国
可藏式表面安装接线盒-Hideaway® HSA 402图片
可藏式表面安装接线盒-Hideaway® HSA 402
厂家报价：价格面议
生产状态：促销
爱思创Extron电子
爱思创Extron电子
详情
爱思创电子（上海）有限公司（爱思创Extron中国）全球总部位于美国加州，是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、...
经销商 联系方式
爱思创Extron电子 4000.398766、 021-3760 1568
  • 产品
  • 参数
  • 附件配件
  • 下载

　　Extron Hideaway HSA 402为"可藏式"的计算机视频接口连接器接插应用提供了一种结构紧凑，"上支起"式结构解决方案。Hideaway HSA 402能很容易地安装在几乎任何台面内。这种坚固可靠的接线盒结构非常紧凑，使安装时间和安装工作量降到最低。HSA 402安装好后可与台面保持齐平，连接器插座不易察觉。用户按下接线盒的顶部，释放一个机械闭锁机构，HSA接线盒将缓慢地向上"支起"并最终与台面成49°夹角，连接器插座将呈现出来。

特性

　·可容纳多达四个Extron单格式AAP

　·连接器接插和控制方便

　·气动与机械闭锁机构设计使之经久耐用

　·结构紧凑

　·易于安装两个Extron 双格式AAP

　·两个RJ-45（CAT 6）网络/数据/电话线连接器

　·包括RJ-45连接工具包，带标签，一空孔填充块和框架

　·两个非开关式交流电源插座

示意图

面板图

HSA 400/800 Series
 
Control/remote — HSA 822M, HSA 822MS
   Contact closure  (1) 3.5 mm female captive screw connector, 10 pole
   Contact closure pin configurations  Pin 1 = up, pin 2 = down, pin 3 = stop, pin 5 = enable push operation,
pin 6 = status up, pin 7 = status down, pin 9 = status power,
pins 4, 8, and 10 = ground
 
General 
    NOTE       The Universal AC outlet is fully compatible with Europlug, British, Indian, Danish, and Italian plug types.  See the Universal AC outlet guide on the Extron Web site, www.extron.com, for compatibility details on all plug types.
   Power   
      HSA 822M, HSA 822MS  100 VAC to 240 VAC, 50/60 Hz, 25 watts, internal
   Temperature/humidity
      HSA 822M, HSA 822MS   
           Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Mounting   
      Furniture mount  Yes
   Enclosure type  Metal
      HSA 822MS 
      All other models 
   Enclosure dimensions   
    CAUTION       Use the appropriate metal Extron routing template or refer to the surface cutout dimensions here before cutting a hole in the furniture or other surface. Pay special attention to the direction the unit will face; the unit's AAP and connector access side is underlined. Extron is not responsible for miscut mounting holes.
      HSA 400 (US)   
         Top plate (outer rim)  8.613" W x 6.425" D (21.88 cm W x 16.39 cm D)
         Top plate (tilt plate)  6.663" W x 4.475" D (16.92 cm W x 11.37 cm D)
         Surface cutout  8.113 ±0.0325" W (front) x 5.925 ±0.0325" D
(20.61 ±0.083 cm W x 15.05 ±0.083 cm D)
         Clamshell (see diagram)  A = 5.25" (13.3 cm)
B = 7.75" (19.7 cm)
C = 7.75" (19.7 cm)
      HSA 402 (US)   
         Top plate (outer rim)  10.844" W x 6.425" D (27.54 cm W x 16.32 cm D)
         Top plate (tilt plate)  8.894" W x 4.475" D (22.59 cm W x 11.37 cm D)
         Surface cutout  10.344 ±0.0325" W (front) x 5.925 ±0.0325" D
(26.27 ±0.083 cm W x 15.05 ±0.083 cm D)
         Clamshell (see diagram)  A = 5.25" (13.3 cm)
B = 9.80" (24.9 cm)
C = 7.75" (19.7 cm)
      HSA 400 (International)   
         Top plate (outer rim)  10.113" W x 6.425" D (25.74 cm W x 16.32 cm D )
         Top plate (tilt plate)  8.163" W x 4.475" D (21.88 cm W x 11.37 cm D)
         Surface cutout  9.613 ±0.0325" W (front) x 5.925 ±0.0325" D
(24.42 ±0.083 cm W x 15.05 ±0.083 cm D)
         Clamshell (see diagram)  A = 5.25" (13.3 cm)
B = 9.25" (23.5 cm)
C = 7.75" (19.7 cm)
      HSA 402 (International)   
         Top plate (outer rim)  13.844" W x 6.425" D (35.16 cm W x 16.32 cm D)
         Top plate (tilt plate)  11.894" W x 4.475" D (30.21 cm W x 11.37 cm D)
         Surface cutout  13.344 ±0.0325" W (front) x 5.925 ±0.0325" D
(33.89 ±0.083 cm W x 15.05 ±0.083 cm D)
         Clamshell (see diagram)  A = 5.25" (13.3 cm)
B = 12.8" (32.5 cm)
C = 7.75" (19.7 cm)
      HSA 822, HSA 822M   
         Top plate (outer rim)  8.470" W x 8.750" D (21.51 cm W x 22.23 cm D)
         Top plate (vertically lifting plate)
           6.220" W x 6.500" D (15.80 cm W x 16.51 cm D)
         Surface cutout  8.00 ±0.0325" W (AAP access from front and back) x 8.30" ±0.0325" D
(20.32 ±0.083 cm W x 21.08 ±0.083 cm D )
         Clamshell (see diagram)  A = 7.24" (18.39 cm)
B = 8.25" (21.0 cm)
C = 10.98" (27.89 cm)
      HSA 822MS   
         Top plate (outer rim)  9.54" W x 9.82" D (24.23 cm W x 24.94 cm D)
         Top plate (vertically lifting plate, not included—to be provided by customer)
           6.14" W x 6.42" D (15.49 cm W x 16.31 cm D)
         Surface cutout  6.220 ±0.0325" W (AAP access from front and back) x 6.500" ±0.0325" D
(15.80 ±0.083 cm W x 16.51 ±0.083 cm D)
         Clamshell tray (see diagram)
           A = 1.09" (2.77 cm) (tray height)
B = 7.30" (18.54 cm)
C = 10.98" (27.89 cm)
         Overall height under table including tray
           9.48" (24.1 cm)
   Product weight   
      HSA 400, HSA 402  8.4 lbs (3.8 kg)
      HSA 822  8.8 lbs (4.0 kg)
      HSA 822M, HSA 822MS  10.0 lbs (4.5 kg)
   Shipping weight   
      HSA 400, HSA 402  11 lbs (5 kg)
      HSA 822  15 lbs (7 kg)
      HSA 822M, HSA 822MS  17 lbs (8 kg)
   Regulatory compliance   
      Safety   
         HSA 822M, HSA 822MS  CE, CSA C/US
         All other models  CE, CSA C/US, CUL, UL
   MTBF   
      HSA 400, HSA 402, HSA 822 (gas lift)
        100,000 cycles
      HSA 822M, HSA 822MS (stepper motor)
        100,000 cycles
   Warranty  3 years parts and labor
    NOTE     　Specifications are subject to change without notice.
暂无相关附件!!!
暂无相关下载!!!