| 经销商 | 联系方式 |
|---|---|
| 爱思创Extron电子 | 4000.398766、 021-3760 1568 |
Hideaway® HSA 222S是一款带方形框架的Hideaway表面接入金属接线盒。它被专门设计成可方便地桌面接入数据或电源。HSA 222S采用2个RJ-45（CAT 6）网络/数据/电话线连接器的固定配置，并带有2个非开关式交流电源插座。用户按下接线盒的顶部，释放一个机械闭锁机构，HSA枢轴开启，连接器插座最终与桌面成符合人机工学的49°夹角显露出来。
特性
·连接器呈斜上方向接插
·气动与机械闭锁机构设计使之经久耐用
·采用方形框架，结构紧凑
·两个非开关式交流电源插座
·两个RJ-45（CAT 6）网络/数据/电话线连接器
·包括RJ-45连接工具包，带标签，一空孔填充块和框架
示意图
面板图
| HSA 200 Series, HSA 222 Series | ||||
| Video — HSA 200SE, HSA 200CE | ||||
|---|---|---|---|---|
| Gain |
0 dB, 0.6 dB, 1.2 dB, selectable (when input is 0.7 Vp-p, output is 0.7 V, 0.75 V, 0.8 Vp-p) |
|||
| Bandwidth | 300 MHz (-3 dB) | |||
|
||||
| Video input — HSA 200S, HSA 200C | ||||
| Number/signal type | 1 VGA–QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video | |||
| Connectors | (1) 15-pin HD female | |||
| Video input — HSA 200SE, HSA 200 | ||||
| Number/signal type | 1 VGA–QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video | |||
| Connectors | (1) 15-pin HD female | |||
| Nominal level |
1.0 Vp-p for Y of component video 0.7 Vp-p for RGB and for R-Y and B-Y of component video |
|||
| Minimum/maximum levels | Analog: 0.3 V to 1.5 Vp-p with no offset at unity gain | |||
| Impedance | 75 ohms | |||
| Horizontal frequency | 15 kHz to 135 kHz | |||
| Vertical frequency | 30 Hz to 170 Hz | |||
| Input coupling | DC | |||
| Video output — HSA 200S, HSA 200C | ||||
| Number/signal type | 1 pass-through VGA–QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video | |||
| Connectors | 5 BNC female on pigtails | |||
| Video output HSA 200SE, HSA 200CE | ||||
| Number/signal type | 1 VGA–QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video | |||
| Connectors | 5 BNC female on pigtails | |||
| Nominal level |
1.0 Vp-p for Y of component video 0.7 Vp-p for RGB and for R-Y and B-Y of component video |
|||
| Minimum/maximum levels | Analog: 0.3 V to 1.5 Vp-p | |||
| Impedance | 75 ohms | |||
| DC offset | ±5 mV with input at 0 offset | |||
| Return loss | <-35 dB @ 5 MHz | |||
|
||||
| Sync — HSA 200SE, HSA 200CE | ||||
| Input type | RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level component video sync | |||
| Output type | RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level component video sync | |||
| Input level | 2.0 V to 5.0 Vp-p | |||
| Output level | TTL: 5.0 Vp-p, unterminated | |||
| Input impedance | 510 ohms | |||
| Output impedance | 75 ohms | |||
| Max. propagation delay | 18.8 ns | |||
| Max. rise/fall time | 4 ns | |||
| Polarity | Positive or negative (follows input) | |||
| Audio — HSA 200SE, HSA 200CE | ||||
| Gain | Unbalanced output: 0 dB; balanced output: +6 dB | |||
| Frequency response | 20 Hz to 20 kHz, ±0.5 dB | |||
| THD + Noise | 0.025% @ 1 kHz, 0.020% @ 20 kHz at nominal level | |||
| S/N | >90 dB at rated maximum output (21 dB, balanced) | |||
| Stereo channel separation | >75 dB @ 20 Hz to 20 kHz | |||
| Audio input — HSA 200S, HSA 200C | ||||
| Number/signal type | 1 stereo, unbalanced | |||
| Connectors | (1) 3.5 mm stereo female jack | |||
| Audio input — HSA 200SE, HSA 200CE | ||||
| Number/signal type | 1 stereo, unbalanced | |||
| Connectors | (1) 3.5 mm stereo female jack | |||
| Impedance | >10k ohms unbalanced, DC coupled | |||
| Nominal level | -10 dBV (316 mVrms) | |||
| Maximum level | +6 dBu, (balanced or unbalanced) at 1% THD+N | |||
|
||||
| Audio output — HSA 200S, HSA 200C | ||||
| Number/signal type | 1 pass-through stereo, unbalanced | |||
| Connectors | (1) 3.5 mm, direct insertion captive screw connector, 3 pole | |||
| Audio output — HSA 200SE, HSA 200CE | ||||
| Number/signal type | 1 stereo, balanced/unbalanced | |||
| Connectors | (1) 3.5 mm direct insertion captive screw connector, 5 pole | |||
| Impedance | 50 ohms unbalanced, 100 ohms balanced | |||
| Nominal level |
Unbalanced output: -10 dBV (316 mVrms) Balanced output: -2 dBu (632 mVrms) |
|||
| Maximum level (Hi-Z) | >+14 dBu, balanced at 1% THD+N | |||
| Maximum level (600 ohm) | >+6 dBm, balanced at 1% THD+N | |||
| General | ||||
|
||||
| Power (HSA 200SE/CE) | Supplied by an external power supply | |||
| External power supply (HSA 200SE/CE) | 100 VAC to 240 VAC, 50/60 Hz, external, to 12 VDC, 0.42 A, regulated | |||
| Power input requirements (HSA 200SE/CE) | 12 VDC, 0.2 A | |||
| Temperature/humidity (HSA 200SE/CE) |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 °F to +86 °F (0 to +30 °C) / 10% to 90%, noncondensing |
|||
| Mounting | ||||
| Furniture mount | Yes | |||
| Enclosure type | Metal | |||
| Enclosure dimensions | ||||
|
||||
| HSA 200S, HSA 200SE — USA models | ||||
| Top plate (outer rim) |
6.470" W x 5.125" D (16.43 cm W x 13.02 cm D) |
|||
| Surface cutout (inside rim) | ||||
|
5.970 ±0.0325" W x 4.625 ±0.0325" D (15.16 ±0.083 cm W x 11.75 ±0.083 cm D) |
||||
| Top plate (inside tilt plate) | ||||
|
4.344" W x 3.000" D (11.03 cm W x 7.62 cm D) |
||||
| HSA 222S — USA model | ||||
| Top plate (outer rim) |
6.470" W x 5.125" D (16.43 cm W x 13.02 cm D) |
|||
| Surface cutout (inside rim) | ||||
|
5.970 ±0.0325" W x 4.625 ±0.0325" D (15.16 ±0.083 cm W x 11.75 ±0.083 cm D) |
||||
| Top plate (inside tilt plate) | ||||
|
4.660" W x 2.875" D (11.84 cm W x 7.30 cm D) |
||||
| HSA 200C, HSA 200CE — USA models | ||||
| Top plate (outer rim) | 6.500" diameter (16.51 cm diameter) circle | |||
| Surface cutout (inside rim) | ||||
| 6.000 ±0.0325" diameter (15.24 ±0.083 cm diameter) circle | ||||
| Top plate (inside tilt plate) | ||||
|
4.344" W x 3.000" D (11.03 cm W x 7.62 cm D) |
||||
| HSA 200S, HSA 200SE, HSA 200C, HSA 200CE — USA models | ||||
| Box (under surface) |
4.0" H x 4.6" W (front of unit) x 4.4" D (10.2 cm H x 11.7 cm W x 11.2 cm D) without clamps 4.0" H x 8.0" W (front of unit) x 4.4" D (10.2 cm H x 20.3 cm W x 11.2 cm D) with clamps |
|||
| HSA 222S — USA model | ||||
| Box (under surface) |
5.6" H x 5.3" W (front of unit) x 3.6" D (14.2 cm H x 13.5 cm W x 9.1 cm D) without clamps 5.6" H x 8.6" W (front of unit) x 3.6" D (14.2 cm H x 21.8 cm W x 9.1 cm D) with clamps |
|||
| HSA 200S/HSA 200SE — international square models | ||||
| Top plate (outer rim) | 8.183" W x 6.375" D (20.79 cm W x 16.19 cm D) | |||
| Surface cutout (inside rim) | ||||
| 7.683 ±0.0325" W x 5.875 ±0.0325" D (19.51 ±0.083 cm W x 14.92 ±0.083 cm D) | ||||
| Top plate (inside tilt plate) | ||||
| 5.90" W x 4.10" D (14.99 cm W x 10.41 cm D) | ||||
| HSA 222S — international square models | ||||
| Top plate (outer rim) | 8.183" W x 6.375" D (20.78 cm W x 16.19 cm D) | |||
| Surface cutout (inside rim) | ||||
|
7.683 ±0.0325" W x 5.875 ±0.0325" D (19.51 ±0.083 cm W x 14.92 ±0.083 cm D) |
||||
| Top plate (inside tilt plate) | ||||
| 6.183" W x 3.75" D (15.70 cm W x 9.53 cm D) | ||||
| HSA 200C/HSA 200CE — international circular models | ||||
| Top plate (outer rim) | 8.5" diameter (21.6 cm diameter) circle | |||
| Surface cutout (inside rim) | ||||
| 8.0 ±0.0325" diameter (20.3 ±0.083 cm diameter) circle | ||||
| Top plate (inside tilt plate) | ||||
|
5.9" W x 4.1" D (15.1 cm W x 10.4 cm D) |
||||
| HSA 200 — international, all models | ||||
| Box (under surface) |
4.0" H x 6.3" W (front of unit) x 5.0" D (10.2 cm H x 15.9 cm W x 12.7 cm D) without clamps 4.0" H x 10.0" W (front of unit) x 5.0" D (10.2 cm H x 25.3 cm W x 12.7 cm D) with clamps |
|||
| HSA 222 — international, all models | ||||
| Box (under surface) |
4.5" H x 6.6" W (front of unit) x 4.9" D (11.4 cm H x 16.8 cm W x 12.4 cm D) without clamps 4.5" H x 10.3" W (front of unit) x 4.9" D (11.4 cm H x 26.2 cm W x 12.4 cm D) with clamps |
|||
| Product weight | ||||
| HSA 200S, HSA 200C | 4.0 lbs (1.8 kg) | |||
| HSA 222S | 3.5 lbs (1.6 kg) | |||
| HSA 200SE, HSA 200CE | 5.0 lbs (2.3 kg) | |||
| Shipping weight | ||||
| HSA 200S, HSA 200C, HSA 222S | 7 lbs (4 kg) | |||
| HSA 200SE, HSA 200CE | 8 lbs (4 kg) | |||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | |||
| Regulatory compliance | ||||
| Safety | CE, CUL, CSA C/US, UL | |||
| EMI/EMC | ||||
| HSA 200SE, HSA 200CE | CE, C-tick, FCC Class A, ICES, VCCI | |||
| MTBF | 30,000 hours | |||
| Warranty | 3 years parts and labor | |||
|
||||
|
||||
首页