| 经销商 | 联系方式 |
|---|---|
| 爱思创Extron电子 | 4000.398766、 021-3760 1568 |
Extron DVI DL 201 是一组发送器和接收器，可以远距离传送双链路或单链路 DVI 信号，大大超过双链路 DVI 电缆传输所规定的 15'（5 m）限制。DVI DL 201 发送器和接收器使用 3 条经济的、方便集成的 CAT 5、CAT 5e、CAT 6 或 CAT 7 电缆，可以将双链路或单链路 DVI-D 信号发送至最远 200' 的距离。
特性
·通过 3 条 CAT 5 电缆发送单链路 DVI-D 和 RS-232 信号
·可将 2560x1600 信号发送 至 100'（30 m)，将 XGA (1024x768）信号发送至 200'（60 m）
·DVI 输入环通
·支持 DDC 和 HDCP
·EDID 管理器
·发送器和接收器的远程供电
·双向 RS-232/红外直通
示意图
面板图
| DVI DL 201 TX/RX Series | |||
|
|||
| Video | |||
|---|---|---|---|
| Maximum data rate | 10 Gbps (3.3 Gbps per color) | ||
| Maximum pixel clock | 330 MHz (165 MHz per link) | ||
| Resolution range | Up to 2560x1600 @ 60 Hz | ||
| Formats | RGB and YCbCr digital video | ||
| Standards | DVI 1.0, HDMI 1.2 | ||
| Video input and loop-through — transmitter | |||
| Number/signal type |
1 dual link DVI-D* input 1 dual link DVI-D* local loop-through |
||
| Connectors | 2 DVI-I female (1 for input, 1 for loop-through) | ||
| Interconnection between transmitter and receiver | |||
| Connectors | (3) RJ-45 per unit for 2 CAT 5/5e/6/7 UTP or STP (shielded twisted pair) cables connecting the transmitter and receiver | ||
| Termination standards | TIA/EIA T568A or T568B. Pin configurations for each standard are available in the manual's installation chapter. | ||
| Signal transmission distance | |||
| 2560x1600 @ 60 Hz | |||
| CAT 5/5e/6/7 STP (shielded twisted pair) cable | Up to 125' (38 m) | ||
| CAT 5/5e/6 UTP cable |
100' (30 m) Longer distances are possible with lower rates. |
||
|
|||
| Video output — receiver | |||
| Number/signal type | 1 dual link DVI-D* | ||
| Connectors | 1 DVI-I female | ||
| Control/remote — external device (pass-through) | |||
| Serial control port input | |||
| Transmitter | RS-232 via (1) 3.5 mm, 3 pole captive screw connector | ||
| Receiver | 1 set of proprietary signals on a female RJ-45 jack | ||
| Serial control port output | |||
| Transmitter | 1 set of proprietary signals on a female RJ-45 jack | ||
| Receiver | RS-232 via a 3.5 mm, 3 pole captive screw connector | ||
|
|||
| Serial control pin configurations | Captive screw connectors: 1 = Tx, 2 = Rx, 3 = GND | ||
| General | |||
| Recommended cable type | CAT 5/5e/6/7 (shielded or unshielded) | ||
| External power supply | 100 VAC to 240 VAC, 50/60 Hz, 6 W max., external; to 12 VDC, 2 A, regulated | ||
| Power input requirements | 12 VDC, 0.4 A for both transmitter and receiver | ||
|
|||
| Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
| Cooling | Convection, no vents | ||
| Mounting | |||
| Rack mount | Yes, with optional 1U, 9.5" deep rack shelf (RSU 129, #60-190-01; RSB 129, 60-604-01); 1U, 6" deep rack shelf (RSU 126, #60-190-10; RSB 126, 60-604-10); or VersaTools® 1U, 3.5" deep rack shelf (RSF 123, #60-190-20; RSB 123, 60-604-20) | ||
| Furniture mount | Yes, with optional MBD 129 Through-Desk Mounting Kit (70-077-02) | ||
| Pole mount | Yes, attachable to a projector pole mount using optional PMK 300 kit (70-374-02 or -03) | ||
| Enclosure type | Metal | ||
| Enclosure dimensions | |||
| DVI DL 201 TX |
1.75" H x 8.75" W x 3.0" D (1U high, half rack wide) 4.4 cm H x 22.2 cm W x 7.6 cm D (Depth excludes connectors.) |
||
| DVI DL 201 RX |
1.0" H x 4.3" W x 3.0" D (quarter rack wide) (2.5 cm H x 10.9 cm W x 7.6 cm D) (Depth excludes connectors.) |
||
| Product weight |
Transmitter: 0.6 lbs (0.3 kg) Receiver: 0.3 lbs (0.1 kg) Transmitter and receiver: 0.9 lbs (0.4 kg) |
||
| Shipping weight | 2 lbs (1 kg) | ||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
| Regulatory compliance | |||
| Safety | CE, CUL, UL | ||
| EMI/EMC | CE, C-tick, FCC Class A**, ICES, VCCI | ||
| MTBF | 30,000 hours | ||
| Warranty | 3 years parts and labor | ||
|
|||
|
|||
|
|||
首页