| 经销商 | 联系方式 |
|---|---|
| 爱思创Extron电子 | 4000.398766、 021-3760 1568 |
Extron P/2 DA1是一款尺寸极其紧凑的1路输入1 路缓冲输出VGA-UXGA 线路驱动器。它在使用ExtronVGA MHR 电缆等高质量电缆时能将高清晰度计算机视频信号驱动远至80 米。P/2 DA1能对信号进行放大和清晰度控制，使视频信号能够远距离传输，重现更亮、更清晰的图象；这对输出视频信号功率很低的膝上型计算机来说很有用。P/2 DA1 线路驱动器还将许多膝上型计算机中常见的低电平同步电压（低至2V ）恢复到正常的TTL电平。这使得膝上型计算机能兼容更多的显示设备和电缆类型。显示器的识别位被传递到膝上型计算机中。P/2 DA1 线路驱动器装在一个如适配器大小的机壳内，能够直接连接膝上型计算机。
特性
·兼容VGA-UXGA图形卡、监视器、投影机、以及带15针HD 输出的Mac计算机
·300MHz （-3dB ）的RGB视频带宽
·缓冲输出
·用户可选的增益/图象清晰度调节
·塑料机壳
·P/2 DA1 （通用型）使用100-240V交流的桌面国际通用电源（自带）
·P/2 DA1 USB 带有一根USB电源线，通过膝上型计算机的USB端口供电
·计算机的技术参数，以确保USB端口供电正常。
·注：P/2 DA1 USB需使用达100mA 的电流，用户应查看其
示意图
面板图
| P/2 DA1, P/2 DA1 USB Line Drivers | |||
| Video | |||
|---|---|---|---|
| Gain | 0 dB, 0.6 dB, 1.2 dB, selectable: when input is 0.7 Vp-p, output is 0.7 V, 0.75 V, 0.8 Vp-p when switch is at normal, medium, and maximum positions, respectively | ||
| Bandwidth | 300 MHz (-3 dB) | ||
|
|||
| Video input | |||
| Number/signal type | 1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video | ||
| Connectors | (1) 15-pin male | ||
| Nominal level | 1.0 Vp-p for Y of component video 0.7 Vp-p for RGB and for R-Y and B-Y of component video |
||
| Minimum/maximum levels | Analog: 0.3 VDC to 1.5 VDC p-p with no offset at unity gain | ||
| Impedance | 75 ohms | ||
| Horizontal frequency | 15 kHz to 135 kHz | ||
| Vertical frequency | 30 Hz to 170 Hz | ||
| Video output | |||
| Number/signal type | 1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video | ||
| Connectors | (1) 15-pin HD female | ||
| Nominal level | 1.0 Vp-p for Y of component video 0.7 Vp-p for RGB and for R-Y and B-Y of component video |
||
| Minimum/maximum levels | Analog: 0.3 VDC to 1.5 VDC p-p with no offset at unity gain | ||
| Impedance | 75 ohms | ||
| DC offset | ±5 mV maximum with input at 0 offset | ||
|
|||
| Sync | |||
| Input type | RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level sync | ||
| Output type | RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level sync | ||
| Input level | 2.0 V to 5.0 Vp-p | ||
| Output level | TTL: 5 Vp-p | ||
| Input impedance | 510 ohms | ||
| Output impedance | 75 ohms | ||
| Max. propagation delay | 18.8 ns | ||
| Max. rise/fall time | 4 ns | ||
| Polarity | Positive or negative | ||
| General | |||
| Power | |||
| P/2 DA1 | 100 to 250 VAC, 4 watts, maximum, external, attached | ||
| P/2 DA1 USB | USB (5.0 VDC, 0.2 A) | ||
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
| Cooling | Convection, no vents | ||
| Mounting | No | ||
| Enclosure type | Plastic clamshell | ||
| Enclosure dimensions | 0.6" H x 1.3" W x 3.1" D (1.4 cm H x 3.3 cm W x 7.9 cm D) |
||
| Product weight | |||
| P/2 DA1 | 0.5 lb (0.3 kg) | ||
| P/2 DA1 USB | 0.1 lb (<0.1 kg) | ||
| Shipping weight | 1 lb (1 kg) | ||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
| Regulatory compliance | |||
| Safety | CE, CUL, UL | ||
| EMI/EMC | CE | ||
| MTBF | 30,000 hours | ||
| Warranty | 3 years parts and labor | ||
|
|||
|
|||
首页