返回
爱思创电子（上海）有限公司_爱思创Extron中国
MediaLink® 控制器-MLC 104 IP Plus DV+图片
MediaLink® 控制器-MLC 104 IP Plus DV+
厂家报价：价格面议
生产状态：在产
爱思创Extron电子
爱思创Extron电子
详情
爱思创电子（上海）有限公司（爱思创Extron中国）全球总部位于美国加州，是世界领先的专业视音频系统集成产品的生产商。爱思创Extron产品主要包括视音频控制系统、计算机视频接口、切换器、矩阵切换器、...
经销商 联系方式
爱思创Extron电子 4000.398766、 021-3760 1568
  • 产品
  • 参数
  • 附件配件
  • 下载

　　Extron MLC 104 IP Plus 系列控制器兼具增强的功能和更大的价值.

　　其设计用于控制各种小型音视频系统，采用Extron 创新的IP Link 以太网控制技术进行远程诊断、设备管理和系统支持。MLC 104 IP Plus 提供通用的显示控制、红外学习功能、3 路数字输入/ 输出，并支持IRCM — 红外控制模块。MLC 104 IP Plus 分带标准面板或不带标准面板两种，而标准面板中又分带一个 AAP 开口或讲台面板两种。

特性

·四单元面板

·集成的双功能 DVD 和 VCR 红外控制

·附带黑色和白色两种耐冲击性塑料安装面板

·用于通用显示控制的双向 RS-232 端口

·IP Link 以太网监控

·三个数字输入/ 输出端口

·支持可选的 IRCM — 红外控制

·对外部信号源进行定制控制的模块

·用于信号源控制的专用红外端口

·用于支持MLS — MediaLink 切换器的RS-232 端口

·待机定时器用于关闭显示

·红外学习功能

示意图

面板图

MLC 104 IP Plus Series
 
Control — host ports 
   Serial host port  1 bidirectional RS-232 front panel 2.5 mm mini stereo jack
   Baud rate and protocol  38400, 8 data bits, 1 stop bit, no parity
   Serial control pin configurations  Mini stereo jack: tip = TX, ring = RX, sleeve = GND
   Ethernet host port  1 RJ-45 female
   Ethernet data rate  10/100Base-T, half/full duplex with autodetect
   Ethernet protocol  ARP, DHCP, ICMP (ping), TCP/IP, Telnet, HTTP, SMTP
   Ethernet default settings  Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Default gateway = 0.0.0.0
DHCP = off
   Web server  Up to 200 simultaneous sessions
7.25 MB nonvolatile user memory
   Secondary control panel (SCP)  (1) 3.5 mm 5-pole direct insertion captive screw connector
   Program control  Extron's Global Configurator for Windows®
Extron's Simple Instruction Set (SIS™)
Microsoft® Internet Explorer, Telnet
   IR learning frequencies  30 kHz to 62 kHz
   IR learning distance  2" (5.1 cm) to 12" (30.5 cm) from the top panel
 
Control — serial ports 
   Display control port  (1) 3.5 mm direct insertion captive screw connector, 3 pole, for bidirectional RS-232 control (± 5V)
   Switcher control port  (1) 3.5 mm direct insertion captive screw connector, 3 pole, for bidirectional RS-232 control (±5 V)
   Baud rate and protocol (RS-232)  115200 to 300 baud (9600 baud = default); 8 (default) or 7 data bits; 1(default) or 2 stop bits; no parity (default), or even or odd parity
 
Control — IR port 
   IR control port  (1) 3.5 mm direct insertion captive screw connector, 2 pole
TTL level (0 to 5 V) infrared control up to 1 MHz
 
Digital I/O control 
   Number/type  3 digital input/output (configurable)
   Connector  (1) 3.5 mm direct insertion captive screw connector, 4 pole
   Pin configuration  1, 2, 3 = digital inputs/outputs 1, 2, and 3; GND = GND
   Digital inputs   
      Input voltage range  0-12 VDC
      Input impedance  28k ohms
      Programmable pullup  2k ohms to +5 VDC
      Threshold low to high  >2.8 VDC
      Threshold high to low  <2.0 VDC
   Digital outputs  250 mA sink from 24 VDC, maximum
 
General 
   External power supply  100 VAC to 240 VAC, 50/60 Hz, external; to 12 VDC, 1 A, regulated
   Power input requirements   
      MLC 104 IP Plus DV+  12 VDC, 0.305 A (includes MLC 104 IP Plus and IRCM-DV+)
      All other models  12 VDC, 0.285 A (0.305 A if used with an optional IRCM-DV+)
    NOTE     An MLC 104 IP Plus Series controller must be powered by its own power supply.  It cannot be powered by an MLS switcher.
   Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling  Convection, unvented
   Rack mount   
      MLC 104 IP Plus DV+  No, but wall and furniture mountable
      All other models  Yes, with optional rack mounting kits, and also wall- and furniture-mountable with optional mounting kits
   Enclosure type   
      MLC 104 IP Plus controller only  No faceplate, metal rear enclosure
      MLC 104 IP Plus, MLC 104 IP Plus DV+  High-impact plastic faceplate, metal rear enclosure
      MLC 104 IP Plus in RAL9010, MLC 104 IP Plus AAP, MLC 104 IP Plus L  Metal faceplate, metal rear enclosure
   Enclosure dimensions   
      MLC 104 IP Plus faceplate  4.5" H x 4.6" W x 0.1" D (11.4 cm H x 11.7 cm W x 0.3 cm D) (2 gang)
      MLC 104 IP Plus AAP and MLC 104 IP Plus DV+ faceplates  4.5" H x 8.2" W x 0.1" D (11.4 cm H x 20.9 cm W x 0.3 cm D) (4 gang)
      MLC 104 IP Plus L faceplate  3.15" H x 6.5" W x 0.1" D (8.0 cm H x 16.5 cm W x 0.3 cm D)
      MLC 104 IP Plus DV+ device  2.7" H x 3.4" W x 1.8" D (6.9 cm H x 8.6 cm W x 4.6 cm D) and
2.7" H x 2.6" W x 0.9" D (6.9 cm H x 6.6 cm W x 2.3 cm D)
(Depth excludes knobs and buttons.  Fits some 4 gang wall boxes.  Allow at least 1.9" [4.8 cm] depth in the wall or furniture.)
      All other models' device  2.7" H x 3.4" W x 1.8" D (6.9 cm H x 8.6 cm W x 4.6 cm D)
(Depth excludes knob and buttons.  Fits some 2 gang boxes.  Allow at least 1.9" [4.8cm] depth in the wall or furniture.)
      MLC 104 IP Plus & L Rear
      MLC 104 IP Plus DV+ & AAP Rear
   Product weight   
      MLC 104 IP Plus DV+  2.1 lbs (1.0 kg)
      All other models  1.9 lbs (0.9 kg)
   Shipping weight  6 lbs (3 kg)
   Vibration  ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance   
      Safety  CE, C-tick, CUL, UL
      EMI/EMC  CE, C-tick, FCC Class A, VCCI, ICES
      Accessibility  Complies with the appropriate requirements of Section 508 of the Rehabilitation Act (29U.S.C.794d).
   MTBF  30,000 hours
   Warranty  3 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
暂无相关附件!!!
暂无相关下载!!!