| 经销商 | 联系方式 |
|---|---|
| 爱思创Extron电子 | 4000.398766、 021-3760 1568 |
| 瑞达讯科技 | 0755-83361979 |
Extron MTP 15HD A 系列产品中包括通用的微型双绞线发送器和接收器组，用于通过一根非屏蔽双绞线电缆将高分辨率计算机视频和合成的单声道音频信号远距离发送到演示显示设备.
它们与分辨率高达 1600 x 1200 的信号兼容，可分别将XGA信号和UXGA 信号发送到185米和135米以外。
特性
·输入：用于视频信号的15针 HD 插座和用于音频的 3.5 mm 立体声微型插孔
·输出：用于非屏蔽双绞线的 RJ-45 插座
·峰值预调电路用于优化视频信号的远距离传送质量
·安装在标准的1单元接线墙盒内
·通过一根CAT 5、5e 或 6 类别的非屏蔽双绞线电缆发送和接收高分辨率视频信号和合成的单声道音频信号到185米以外
·支持RGBHV、RGBS、RGsB、RsGsBs、分量视频信号、S-视频信号和复合视频信号
·与双级或三级同步的 HDTV 分量视频兼容
·前面板上配有LED 电源显示
·通用安装选项
·提供外置型国际通用电源，产品编号为 # 70-055-01
面板图
| MTP 15HD A Series | ||||
| Video | ||||
|---|---|---|---|---|
| Gain | Unity | |||
| Number/signal type | 1 set of proprietary analog signals | |||
| Connectors | 1 female RJ-45 | |||
| Video input and loop through — transmitters | ||||
| Number/signal type | ||||
| MTP T 15HD A | 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video 1 buffered RGBHV, RGBS, RGsB, RsGsBs local monitor loop through (includes ID bits) |
|||
| MTP T 15HD A AAP, MTP T 15HD A D, MTP T 15HD A WM | 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video | |||
| Connectors | ||||
| MTP T 15HD A | 2 female 15-pin HD | |||
| MTP T 15HD A AAP, MTP T 15HD A D, MTP T 15HD A WM | 1 female 15-pin HD | |||
| Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video |
|||
| Minimum/maximum levels | 0.3 V to 1.45 Vp-p | |||
| Impedance | 75 ohms | |||
| Horizontal frequency | 15 kHz to 130 kHz | |||
| Vertical frequency | 30 Hz to 150 Hz | |||
| Return loss | <-30 dB @ 5 MHz | |||
| DC offset (max. allowable) | 250 mV | |||
| Video output — receivers (MTP RL 15HD A, MTP RL 15HD A SEQ) | ||||
| Number/signal type | 1 set of proprietary analog signals 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video |
|||
| Connectors | 1 female RJ-45 1 female 15-pin HD |
|||
| Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video |
|||
| Minimum/maximum levels | 0.3 V to 1.45 Vp-p | |||
| Impedance | 75 ohms | |||
| Return loss | <-30 dB @ 5 MHz | |||
| DC offset | <±35 mV with input at 0 offset | |||
| Maximum resolution | 1920x1200 | |||
|
||||
| Sync | ||||
| Input type (transmitters) | RGBHV, RGBS, RGsB, RsGsBs | |||
| Output type (receivers) | RGBHV, RGBS, RGsB, RsGsBs | |||
| Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM | |||
| Input level (transmitter) | 3.5 V to 5.5 Vp-p, unterminated | |||
| Output level (receivers) | 4.0 V to 5.0 Vp-p, unterminated | |||
| Input impedance (transmitter) | 573 ohms ±5% | |||
| Output impedance (receivers) | 110 ohms | |||
| Max. input voltage (transmitter) | 5.5 V p-p | |||
| Polarity | ||||
| Transmitter | Positive or negative (follows input polarity) | |||
| Receivers | Positive or negative (switch-selectable) | |||
| Audio — all models | ||||
| Number/signal type | 1 set of proprietary analog signals | |||
| Connectors | 1 female RJ-45 | |||
| Gain | Unbalanced output: 0 dB; balanced output: +6 dB | |||
| Frequency response | 20 Hz to 20 kHz, ±1 dB | |||
| THD + Noise | 0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level | |||
| S/N | >70 dB at maximum output (unweighted) | |||
| Stereo channel separation | ||||
| MTP T 15HD A AAP, MTP T 15HD A D, MTP T 15HD A WM | >60 dB @ 1 kHz | |||
| CMRR | >43 dB @ 20 Hz to 20 kHz | |||
| Audio input — transmitters | ||||
| Number/signal type | 1 stereo, unbalanced | |||
| Connectors | (1) 3.5 mm mini stereo jack | |||
| Impedance | >10k ohms, unbalanced | |||
| Nominal level | +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) | |||
| Maximum level | +18 dBu, (unbalanced) at 1%THD+N | |||
|
||||
| Audio output — MTP T 15HD A AAP, MTP T 15HD A D, MTP T 15HD A WM local stereo output | ||||
| Number/signal type | 1 stereo, balanced/unbalanced | |||
| Connectors | (1) 3.5 mm direct insertion captive screw connector, 5 pole | |||
| Impedance | 50 ohms unbalanced, 100 ohms balanced | |||
| Gain error | ±1 dB channel to channel | |||
| Maximum level (Hi-Z) | >+23 dBu, balanced or unbalanced at 1% THD+N | |||
| Maximum level (600 ohm) | >+17 dBm, balanced or unbalanced at 1% THD+N | |||
| Audio output — receivers | ||||
| Number/signal type | 2 mono, balanced/unbalanced | |||
| Connectors | (1) 3.5 mm captive screw connector, 5 pole | |||
| Impedance | 50 ohms unbalanced, 100 ohms balanced | |||
| Nominal level | +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) | |||
| Maximum level | +18 dBu, unbalanced at 1% THD+N | |||
| General | ||||
| Recommended cable type | CAT 5/5E/6 (shielded or unshielded) | |||
| External power supply | 100 VAC to 240 VAC, 50/60 Hz, external; to 12 VDC, 2 A, regulated | |||
| Power input requirements | 12 VDC, 0.5 A | |||
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
|||
| Cooling | Convection, no vents | |||
| Mounting | ||||
| Rack mount | ||||
| MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ | Yes, with optional 1U, 9.5" deep rack shelf (RSU 129, #60-190-01 or RSB 129, #60-604-01); 1U, 6" deep rack shelf (RSU 126, #60-190-10 or RSB 126, #60-604-10); or VersaTools® 1U, 3.5" deep rack shelf (RSF 123, #60-190-20 or RSB 123, #60-604-20) | |||
| Furniture mount | ||||
| MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ | Yes, with optional Mini Under-Desk Mounting Kit, part #70-212-01 | |||
| MTP T 15HD A AAP | Wall or furniture mountable with optional AAP mounting faceplates that have double space high AAP opening | |||
| MTP T 15HD A D | Wall or furniture mountable in a Decora®-style opening | |||
| MTP T 15HD A WM | Wall or furniture mountable in a 1-gang opening | |||
| Pole mount | ||||
| MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ | Yes, with an optional projector mounting kit, part #70-217-01 | |||
| Enclosure type | Metal | |||
| Enclosure dimensions | ||||
| MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ | 1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide) 4.3 cm H x 10.9 cm W x 7.6 cm D (Depth excludes connectors.) |
|||
| Faceplates | ||||
| MTP T 15HD A AAP | 1.4" H x 3.5" W x 0.1" D (3.6 cm H x 8.9 cm W x 0.3 cm D) (double space high AAP plate) |
|||
| MTP T 15HD A D | 2.6" H* x 1.3" W x 0.1" D (6.6 cm H* x 3.3 cm W x 0.3 cm D) (Fits the opening in a 1 gang Decora faceplate.) *Height is 3.8" [9.7 cm] including mounting tabs. |
|||
| MTP T 15HD A WM | 4.5" H x 2.8" W x 0.1" D (11.4 cm H x 7.1 cm W x 0.3 cm D) (1 gang) | |||
| Device | ||||
| AAP, D, and WM models | 2.7" H x 1.4" W x 1.4" D (6.9 cm H x 3.6 cm W x 3.6 cm D) (Depth excludes connectors.) |
|||
| Product weight | 0.4 lbs (0.2 kg) | |||
| Shipping weight | 2 lbs (1 kg) | |||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | |||
| Regulatory compliance | ||||
| Safety | CE, C-tick, CUL, UL | |||
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI | |||
| MTBF | 30,000 hours | |||
| Warranty | 3 years parts and labor | |||
|
||||
|
||||
首页